From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org
Cc: Alan Cox <alan@linux.intel.com>, Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 29/36] nozomi: Tidy up the PCI table
Date: Tue, 2 Mar 2010 15:36:36 -0800 [thread overview]
Message-ID: <1267573003-782-29-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <20100302230956.GC32287@kroah.com>
From: Alan Cox <alan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/nozomi.c | 6 +-----
1 files changed, 1 insertions(+), 5 deletions(-)
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index fac9157..584910f 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -136,10 +136,6 @@ static int debug;
#define RECEIVE_BUF_MAX 4
-/* Define all types of vendors and devices to support */
-#define VENDOR1 0x1931 /* Vendor Option */
-#define DEVICE1 0x000c /* HSDPA card */
-
#define R_IIR 0x0000 /* Interrupt Identity Register */
#define R_FCR 0x0000 /* Flow Control Register */
#define R_IER 0x0004 /* Interrupt Enable Register */
@@ -407,7 +403,7 @@ struct buffer {
/* Global variables */
static const struct pci_device_id nozomi_pci_tbl[] __devinitconst = {
- {PCI_DEVICE(VENDOR1, DEVICE1)},
+ {PCI_DEVICE(0x1931, 0x000c)}, /* Nozomi HSDPA */
{},
};
--
1.7.0.1
next prev parent reply other threads:[~2010-03-02 23:46 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-02 23:09 [GIT PATCH] TTY patches for 2.6.33-git Greg KH
2010-03-02 23:36 ` [PATCH 01/36] serial: fit blackfin uart over sport driver into common uart infrastructure Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 02/36] serial: copy UART properties of UPF_FIXED_TYPE ports provisioned using early_serial_setup Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 03/36] serial: 68328serial.c: remove BAUD_TABLE_SIZE macro Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 04/36] serial: atmel_serial: add poll_get_char and poll_put_char uart_ops Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 05/36] serial: synclink_gt: dropped transmit data bugfix Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 06/36] serial: 8250_pci: add support for MCS9865 / SYBA 6x Serial Port Card Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 07/36] serial: imx: fix NULL dereference Oops when pdata == NULL Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 08/36] serial: add support for Korenix JetCard Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 09/36] serial: fix test of unsigned Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 10/36] serial: Char: cyclades, fix compiler warning Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 11/36] serial: cyclades: allow overriding ISA defaults also when the driver is built-in Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 12/36] tty: char: mxser, remove unnecessary tty test Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 13/36] serial: isicom.c: use pr_fmt and pr_<level> Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 14/36] hvc_console: fix test on unsigned in hvc_console_print() Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 15/36] tty: moxa: remove #ifdef MODULE completely Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 16/36] ip2: remove #ifdef MODULE from ip2main.c Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 17/36] ip2: Add module parameter Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 18/36] tty: declare MODULE_FIRMWARE in various drivers Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 19/36] Char: synclink, remove unnecessary checks Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 20/36] serial: bfin_5xx: remove useless gpio handling with hard flow control Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 21/36] serial: bfin_5xx: need to disable DMA TX interrupt too Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 22/36] serial: bfin_5xx: kgdboc should accept gdb break only when it is active Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 23/36] serial: bfin_5xx: pull in linux/io.h for ioremap prototypes Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 24/36] serial: bcm63xx_uart: don't use kfree() on non kmalloced area Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 25/36] serial: bcm63xx_uart: allow more than one uart to be registered Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 26/36] sdio_uart: Use kfifo instead of the messy circ stuff Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 27/36] nozomi: Add tty_port usage Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 28/36] nozomi: Fix mutex handling Greg Kroah-Hartman
2010-03-02 23:36 ` Greg Kroah-Hartman [this message]
2010-03-02 23:36 ` [PATCH 30/36] serial: timberdale: Remove dependancies Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 31/36] tty: Fix the ldisc hangup race Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 32/36] tty: Fix up char drivers request_room usage Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 33/36] tty: Keep the default buffering to sub-page units Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 34/36] tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 35/36] jsm: removing the uart structure and filename on error Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 36/36] jsm: fixing error if the driver fails to load Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1267573003-782-29-git-send-email-gregkh@suse.de \
--to=gregkh@suse.de \
--cc=alan@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox