public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org
Cc: "Ira W. Snyder" <iws@ovro.caltech.edu>,
	Darius Augulis <augulis.darius@gmail.com>,
	Greg KH <greg@kroah.com>, Alan Cox <alan@lxorguk.ukuu.org.uk>,
	Andrew Morton <akpm@linux-foundation.org>,
	Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 06/36] serial: 8250_pci: add support for MCS9865 / SYBA 6x Serial Port Card
Date: Tue,  2 Mar 2010 15:36:13 -0800	[thread overview]
Message-ID: <1267573003-782-6-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <20100302230956.GC32287@kroah.com>

From: Ira W. Snyder <iws@ovro.caltech.edu>

This patch is heavily based on an earlier patch found on the linux-serial
mailing list [1], written by Darius Augulis.

The previous incarnation of this patch only supported a 2x serial port
card.  I have added support for my SYBA 6x serial port card, and tested on
x86.

[1]: http://marc.info/?l=linux-serial&m=124975806304760

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/parport/parport_pc.c |    6 ++++++
 drivers/serial/8250_pci.c    |   22 +++++++++++++++++++++-
 include/linux/pci_ids.h      |    1 +
 3 files changed, 28 insertions(+), 1 deletions(-)

diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index ad113b0..0950fa4 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2908,6 +2908,7 @@ enum parport_pc_pci_cards {
 	netmos_9805,
 	netmos_9815,
 	netmos_9901,
+	netmos_9865,
 	quatech_sppxp100,
 };
 
@@ -2989,6 +2990,7 @@ static struct parport_pc_pci {
 	/* netmos_9805 */               { 1, { { 0, -1 }, } },
 	/* netmos_9815 */               { 2, { { 0, -1 }, { 2, -1 }, } },
 	/* netmos_9901 */               { 1, { { 0, -1 }, } },
+	/* netmos_9865 */               { 1, { { 0, -1 }, } },
 	/* quatech_sppxp100 */		{ 1, { { 0, 1 }, } },
 };
 
@@ -3092,6 +3094,10 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 },
 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
 	  0xA000, 0x2000, 0, 0, netmos_9901 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+	  0xA000, 0x1000, 0, 0, netmos_9865 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+	  0xA000, 0x2000, 0, 0, netmos_9865 },
 	/* Quatech SPPXP-100 Parallel port PCI ExpressCard */
 	{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index b28af13..8b18c3c 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -760,7 +760,8 @@ static int pci_netmos_init(struct pci_dev *dev)
 	/* subdevice 0x00PS means <P> parallel, <S> serial */
 	unsigned int num_serial = dev->subsystem_device & 0xf;
 
-	if (dev->device == PCI_DEVICE_ID_NETMOS_9901)
+	if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) ||
+		(dev->device == PCI_DEVICE_ID_NETMOS_9865))
 		return 0;
 	if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
 			dev->subsystem_device == 0x0299)
@@ -1479,6 +1480,7 @@ enum pci_board_num_t {
 
 	pbn_b0_bt_1_115200,
 	pbn_b0_bt_2_115200,
+	pbn_b0_bt_4_115200,
 	pbn_b0_bt_8_115200,
 
 	pbn_b0_bt_1_460800,
@@ -1703,6 +1705,12 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.base_baud	= 115200,
 		.uart_offset	= 8,
 	},
+	[pbn_b0_bt_4_115200] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 4,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
 	[pbn_b0_bt_8_115200] = {
 		.flags		= FL_BASE0|FL_BASE_BARS,
 		.num_ports	= 8,
@@ -3649,6 +3657,18 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0, 0, pbn_b0_1_115200 },
 
 	/*
+	 * Best Connectivity PCI Multi I/O cards
+	 */
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+		0xA000, 0x3004,
+		0, 0, pbn_b0_bt_4_115200 },
+
+	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
 	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
 	 */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 0be8243..3ec4003 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2697,6 +2697,7 @@
 #define PCI_DEVICE_ID_NETMOS_9835	0x9835
 #define PCI_DEVICE_ID_NETMOS_9845	0x9845
 #define PCI_DEVICE_ID_NETMOS_9855	0x9855
+#define PCI_DEVICE_ID_NETMOS_9865	0x9865
 #define PCI_DEVICE_ID_NETMOS_9901	0x9901
 
 #define PCI_VENDOR_ID_3COM_2		0xa727
-- 
1.7.0.1


  parent reply	other threads:[~2010-03-02 23:37 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-03-02 23:09 [GIT PATCH] TTY patches for 2.6.33-git Greg KH
2010-03-02 23:36 ` [PATCH 01/36] serial: fit blackfin uart over sport driver into common uart infrastructure Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 02/36] serial: copy UART properties of UPF_FIXED_TYPE ports provisioned using early_serial_setup Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 03/36] serial: 68328serial.c: remove BAUD_TABLE_SIZE macro Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 04/36] serial: atmel_serial: add poll_get_char and poll_put_char uart_ops Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 05/36] serial: synclink_gt: dropped transmit data bugfix Greg Kroah-Hartman
2010-03-02 23:36 ` Greg Kroah-Hartman [this message]
2010-03-02 23:36 ` [PATCH 07/36] serial: imx: fix NULL dereference Oops when pdata == NULL Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 08/36] serial: add support for Korenix JetCard Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 09/36] serial: fix test of unsigned Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 10/36] serial: Char: cyclades, fix compiler warning Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 11/36] serial: cyclades: allow overriding ISA defaults also when the driver is built-in Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 12/36] tty: char: mxser, remove unnecessary tty test Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 13/36] serial: isicom.c: use pr_fmt and pr_<level> Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 14/36] hvc_console: fix test on unsigned in hvc_console_print() Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 15/36] tty: moxa: remove #ifdef MODULE completely Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 16/36] ip2: remove #ifdef MODULE from ip2main.c Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 17/36] ip2: Add module parameter Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 18/36] tty: declare MODULE_FIRMWARE in various drivers Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 19/36] Char: synclink, remove unnecessary checks Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 20/36] serial: bfin_5xx: remove useless gpio handling with hard flow control Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 21/36] serial: bfin_5xx: need to disable DMA TX interrupt too Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 22/36] serial: bfin_5xx: kgdboc should accept gdb break only when it is active Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 23/36] serial: bfin_5xx: pull in linux/io.h for ioremap prototypes Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 24/36] serial: bcm63xx_uart: don't use kfree() on non kmalloced area Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 25/36] serial: bcm63xx_uart: allow more than one uart to be registered Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 26/36] sdio_uart: Use kfifo instead of the messy circ stuff Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 27/36] nozomi: Add tty_port usage Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 28/36] nozomi: Fix mutex handling Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 29/36] nozomi: Tidy up the PCI table Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 30/36] serial: timberdale: Remove dependancies Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 31/36] tty: Fix the ldisc hangup race Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 32/36] tty: Fix up char drivers request_room usage Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 33/36] tty: Keep the default buffering to sub-page units Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 34/36] tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 35/36] jsm: removing the uart structure and filename on error Greg Kroah-Hartman
2010-03-02 23:36 ` [PATCH 36/36] jsm: fixing error if the driver fails to load Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1267573003-782-6-git-send-email-gregkh@suse.de \
    --to=gregkh@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=augulis.darius@gmail.com \
    --cc=greg@kroah.com \
    --cc=iws@ovro.caltech.edu \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox