From: Giel van Schijndel <me@mortis.eu>
To: Hans de Goede <hdegoede@redhat.com>
Cc: Jean Delvare <khali@linux-fr.org>,
Giel van Schijndel <me@mortis.eu>,
Jonathan Cameron <jic23@cam.ac.uk>,
Laurens Leemans <laurens@signips.com>,
lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/4] hwmon: f71882fg: add watchdog detection code
Date: Wed, 24 Mar 2010 00:12:15 +0100 [thread overview]
Message-ID: <1269385936-3440-3-git-send-email-me@mortis.eu> (raw)
In-Reply-To: <1269385936-3440-2-git-send-email-me@mortis.eu>
Factor out code for detecting the hardware monitor into a separate
function. Then add a function for detecting the watchdog.
Signed-off-by: Giel van Schijndel <me@mortis.eu>
---
drivers/hwmon/f71882fg.c | 74 ++++++++++++++++++++++++++++++++++++----------
1 files changed, 58 insertions(+), 16 deletions(-)
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 7b31e14..8006271 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -2233,6 +2233,54 @@ static int f71882fg_remove(struct platform_device *pdev)
return 0;
}
+static int __init f71882fg_find_watchdog(int sioaddr,
+ const struct f71882fg_sio_data *sio_data)
+{
+ switch (sio_data->type) {
+ case f71808fg:
+ break;
+
+ case f71862fg:
+ case f71882fg:
+ case f71889fg:
+ /* These have a watchdog, though it isn't implemented (yet). */
+ return -ENOSYS;
+
+ case f71858fg:
+ default:
+ /*
+ * Confirmed (by datasheet) not to have a watchdog. That is,
+ * except for chips matched by the 'default' label of course.
+ */
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int __init f71882fg_find_hwmon(int sioaddr, unsigned short *hwmon_addr,
+ struct f71882fg_sio_data *sio_data)
+{
+ if (sio_data->type == f71858fg)
+ superio_select(sioaddr, SIO_F71858FG_LD_HWM);
+ else
+ superio_select(sioaddr, SIO_F71882FG_LD_HWM);
+
+ if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
+ printk(KERN_WARNING DRVNAME ": Device not activated\n");
+ return -ENODEV;
+ }
+
+ *hwmon_addr = superio_inw(sioaddr, SIO_REG_ADDR);
+ if (*hwmon_addr == 0) {
+ printk(KERN_WARNING DRVNAME ": Base address not set\n");
+ return -ENODEV;
+ }
+ *hwmon_addr &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
+
+ return 0;
+}
+
static int __init f71882fg_find(int sioaddr, unsigned short *hwmon_addr,
struct f71882fg_sio_data *sio_data)
{
@@ -2280,27 +2328,21 @@ static int __init f71882fg_find(int sioaddr, unsigned short *hwmon_addr,
goto exit;
}
- if (sio_data->type == f71858fg)
- superio_select(sioaddr, SIO_F71858FG_LD_HWM);
- else
- superio_select(sioaddr, SIO_F71882FG_LD_HWM);
-
- if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
- printk(KERN_WARNING DRVNAME ": Device not activated\n");
- goto exit;
- }
-
- *hwmon_addr = superio_inw(sioaddr, SIO_REG_ADDR);
- if (*hwmon_addr == 0) {
- printk(KERN_WARNING DRVNAME ": Base address not set\n");
+ err = f71882fg_find_hwmon(sioaddr, hwmon_addr, sio_data);
+ if (err)
goto exit;
- }
- *hwmon_addr &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
- err = 0;
printk(KERN_INFO DRVNAME ": Found %s chip at %#x, revision %d\n",
f71882fg_names[sio_data->type], (unsigned int)*hwmon_addr,
(int)superio_inb(sioaddr, SIO_REG_DEVREV));
+
+ err = f71882fg_find_watchdog(sioaddr, sio_data);
+ if (err == 0)
+ printk(KERN_INFO DRVNAME ": has supported watchdog\n");
+ else if (err != -ENODEV && err != -ENOSYS)
+ goto exit;
+
+ err = 0;
exit:
superio_exit(sioaddr);
release_region(sioaddr, 2);
--
1.6.4.4
next prev parent reply other threads:[~2010-03-23 23:13 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-23 14:12 [PATCH] hwmon: f71882fg: properly acquire I/O regions while probing Giel van Schijndel
2010-03-23 14:17 ` Giel van Schijndel
2010-03-23 23:12 ` [PATCH 1/4] [RFC] hwmon: f71882fg: Add support for the Fintek F71808E Giel van Schijndel
2010-03-23 23:12 ` [PATCH 2/4] hwmon: f71882fg: prepare for addition of watchdog support Giel van Schijndel
2010-03-23 23:12 ` Giel van Schijndel [this message]
2010-03-23 23:12 ` [PATCH 4/4] [RFC] hwmon: f71882fg: Add watchdog API for F71808E and F71889 Giel van Schijndel
2010-03-23 23:26 ` Giel van Schijndel
2010-03-24 8:37 ` Hans de Goede
2010-03-24 9:36 ` Giel van Schijndel
2010-03-24 10:33 ` Hans de Goede
2010-03-24 15:35 ` Giel van Schijndel
2010-03-24 15:51 ` Alan Cox
2010-03-24 16:20 ` Hans de Goede
2010-03-24 20:35 ` Giel van Schijndel
2010-04-25 21:20 ` [lm-sensors] " Jim Cromie
2010-03-25 8:54 ` Giel van Schijndel
2010-03-25 10:40 ` Giel van Schijndel
2010-03-25 12:50 ` Alan Cox
2010-03-25 13:06 ` Hans de Goede
2010-03-25 13:17 ` [PATCH 1/3] resource: shared I/O region support Giel van Schijndel
2010-03-25 13:17 ` [PATCH 2/3] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Giel van Schijndel
2010-03-25 13:17 ` [PATCH 3/3] [RFC] watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E Giel van Schijndel
2010-03-30 9:06 ` Giel van Schijndel
2010-05-20 7:52 ` Wim Van Sebroeck
2010-05-25 21:08 ` Giel van Schijndel
2010-05-26 7:38 ` Wim Van Sebroeck
2010-07-31 21:36 ` Giel van Schijndel
2010-03-25 21:10 ` [PATCH 2/3] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Hans de Goede
2010-04-25 10:35 ` Giel van Schijndel
2010-07-31 21:21 ` Giel van Schijndel
2010-03-25 15:57 ` [PATCH 1/3] resource: shared I/O region support Alan Cox
2010-03-25 18:03 ` Giel van Schijndel
2010-03-25 18:16 ` Alan Cox
2010-03-29 8:18 ` Giel van Schijndel
2010-03-29 16:07 ` Jesse Barnes
2010-03-29 17:38 ` Giel van Schijndel
2010-03-29 17:44 ` Giel van Schijndel
2010-03-29 17:45 ` H. Peter Anvin
2010-03-29 18:06 ` Jesse Barnes
2010-03-29 18:17 ` H. Peter Anvin
2010-03-29 18:29 ` Alan Cox
2010-04-02 20:29 ` Jesse Barnes
2010-03-29 18:39 ` Alan Cox
2010-03-29 18:56 ` H. Peter Anvin
2010-03-29 17:59 ` Jesse Barnes
2010-03-29 17:59 ` Jesse Barnes
2010-03-24 8:26 ` [PATCH 2/4] hwmon: f71882fg: prepare for addition of watchdog support Hans de Goede
2010-03-24 8:36 ` Hans de Goede
2010-03-24 8:25 ` [PATCH 1/4] [RFC] hwmon: f71882fg: Add support for the Fintek F71808E Hans de Goede
2010-03-24 9:23 ` [PATCH 1/4] " Giel van Schijndel
2010-03-24 10:31 ` Hans de Goede
2010-07-31 23:31 ` Giel van Schijndel
2010-08-01 6:12 ` Hans de Goede
2010-08-01 13:22 ` Giel van Schijndel
2010-08-01 13:30 ` [PATCH] " Giel van Schijndel
2010-08-04 11:36 ` Hans de Goede
2010-08-04 15:44 ` Giel van Schijndel
2010-08-13 10:56 ` Hans de Goede
2010-08-10 19:11 ` Giel van Schijndel
2010-08-13 10:01 ` Hans de Goede
2010-08-18 18:24 ` Andrew Morton
2010-08-22 18:04 ` Hans de Goede
2010-08-22 18:28 ` Giel van Schijndel
2010-08-01 13:30 ` [PATCH 1/2] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Giel van Schijndel
2010-08-01 13:30 ` [PATCH 2/2] watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG Giel van Schijndel
2010-08-04 11:38 ` [PATCH 1/2] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Hans de Goede
2010-10-02 22:59 ` Giel van Schijndel
2010-10-03 1:06 ` Guenter Roeck
2010-10-03 9:01 ` Jean Delvare
2010-10-03 12:09 ` [PATCH] " Giel van Schijndel
2010-10-03 13:31 ` Guenter Roeck
2010-03-23 23:01 ` [PATCH] hwmon: f71882fg: properly acquire I/O regions while probing Giel van Schijndel
2010-03-24 8:14 ` Hans de Goede
2010-03-24 8:46 ` Giel van Schijndel
2010-03-24 9:09 ` [PATCH] hwmon: f71882fg: code cleanup Giel van Schijndel
2010-03-24 12:54 ` Jean Delvare
2010-03-24 9:09 ` [PATCH] hwmon: f71882fg: acquire I/O regions while we're working with them Giel van Schijndel
2010-03-24 9:28 ` [PATCH] hwmon: f71882fg: properly acquire I/O regions while probing Jean Delvare
2010-03-24 9:29 ` Jean Delvare
2010-03-24 9:34 ` Giel van Schijndel
2010-03-24 12:54 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1269385936-3440-3-git-send-email-me@mortis.eu \
--to=me@mortis.eu \
--cc=hdegoede@redhat.com \
--cc=jic23@cam.ac.uk \
--cc=khali@linux-fr.org \
--cc=laurens@signips.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).