* [PATCH] Staging: comedi: Fixed long lines in gsc_hpdi.c
@ 2010-05-27 9:39 Mark
0 siblings, 0 replies; 2+ messages in thread
From: Mark @ 2010-05-27 9:39 UTC (permalink / raw)
To: gregkh
Cc: Mark, Bill Pemberton, Dirk Hohndel, Mithlesh Thukral, devel,
linux-kernel
This patch fixes some long line lengths in gsc_hpdi.c as found by the
checkpatch.pl tool
Signed-off-by: Mark Rankilor <reodge@gmail.com>
---
drivers/staging/comedi/drivers/gsc_hpdi.c | 30 +++++++++++++++++++---------
1 files changed, 20 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index 51f12bf..17c4f1f 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -311,17 +311,25 @@ struct hpdi_private {
void *plx9080_iobase;
void *hpdi_iobase;
uint32_t *dio_buffer[NUM_DMA_BUFFERS]; /* dma buffers */
- dma_addr_t dio_buffer_phys_addr[NUM_DMA_BUFFERS]; /* physical addresses of dma buffers */
- struct plx_dma_desc *dma_desc; /* array of dma descriptors read by plx9080, allocated to get proper alignment */
- dma_addr_t dma_desc_phys_addr; /* physical address of dma descriptor array */
+ /* physical addresses of dma buffers */
+ dma_addr_t dio_buffer_phys_addr[NUM_DMA_BUFFERS];
+ /* array of dma descriptors read by plx9080, allocated to get proper
+ * alignment */
+ struct plx_dma_desc *dma_desc;
+ /* physical address of dma descriptor array */
+ dma_addr_t dma_desc_phys_addr;
unsigned int num_dma_descriptors;
- uint32_t *desc_dio_buffer[NUM_DMA_DESCRIPTORS]; /* pointer to start of buffers indexed by descriptor */
- volatile unsigned int dma_desc_index; /* index of the dma descriptor that is currently being used */
+ /* pointer to start of buffers indexed by descriptor */
+ uint32_t *desc_dio_buffer[NUM_DMA_DESCRIPTORS];
+ /* index of the dma descriptor that is currently being used */
+ volatile unsigned int dma_desc_index;
unsigned int tx_fifo_size;
unsigned int rx_fifo_size;
volatile unsigned long dio_count;
- volatile uint32_t bits[24]; /* software copies of values written to hpdi registers */
- volatile unsigned int block_size; /* number of bytes at which to generate COMEDI_CB_BLOCK events */
+ /* software copies of values written to hpdi registers */
+ volatile uint32_t bits[24];
+ /* number of bytes at which to generate COMEDI_CB_BLOCK events */
+ volatile unsigned int block_size;
unsigned dio_config_output:1;
};
@@ -570,7 +578,8 @@ static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return -ENOMEM;
pcidev = NULL;
- for (i = 0; i < ARRAY_SIZE(hpdi_boards) && dev->board_ptr == NULL; i++) {
+ for (i = 0; i < ARRAY_SIZE(hpdi_boards) &&
+ dev->board_ptr == NULL; i++) {
do {
pcidev = pci_get_subsys(PCI_VENDOR_ID_PLX,
hpdi_boards[i].device_id,
@@ -618,7 +627,7 @@ static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* remap, won't work with 2.0 kernels but who cares */
priv(dev)->plx9080_iobase = ioremap(priv(dev)->plx9080_phys_iobase,
pci_resource_len(pcidev,
- PLX9080_BADDRINDEX));
+ PLX9080_BADDRINDEX));
priv(dev)->hpdi_iobase =
ioremap(priv(dev)->hpdi_phys_iobase,
pci_resource_len(pcidev, HPDI_BADDRINDEX));
@@ -769,7 +778,8 @@ static int di_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s,
if (err)
return 1;
- /* step 2: make sure trigger sources are unique and mutually compatible */
+ /* step 2: make sure trigger sources are unique and mutually
+ * compatible */
/* uniqueness check */
if (cmd->stop_src != TRIG_COUNT && cmd->stop_src != TRIG_NONE)
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH] Staging: comedi: Checkpatch cleanups in adl_pci9111.c
@ 2010-05-31 9:19 Mark
2010-05-31 9:19 ` [PATCH] Staging: comedi: Fixed long lines in gsc_hpdi.c Mark
0 siblings, 1 reply; 2+ messages in thread
From: Mark @ 2010-05-31 9:19 UTC (permalink / raw)
To: gregkh
Cc: Mark, Bill Pemberton, Rich Folsom, Mithlesh Thukral, Jiri Slaby,
devel, linux-kernel
This patch cleans up some various warnings generated from checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
---
drivers/staging/comedi/drivers/adl_pci9111.c | 105 ++++++++++++++-----------
1 files changed, 59 insertions(+), 46 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index 36a254c..595689d 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -68,8 +68,9 @@ CHANGELOG:
TODO:
- Really test implemented functionality.
- - Add support for the PCI-9111DG with a probe routine to identify the card type
- (perhaps with the help of the channel number readback of the A/D Data register).
+ - Add support for the PCI-9111DG with a probe routine to identify the card
+ type (perhaps with the help of the channel number readback of the A/D Data
+ register).
- Add external multiplexer support.
*/
@@ -83,12 +84,12 @@ TODO:
#include "comedi_pci.h"
#include "comedi_fc.h"
-#define PCI9111_DRIVER_NAME "adl_pci9111"
-#define PCI9111_HR_DEVICE_ID 0x9111
+#define PCI9111_DRIVER_NAME "adl_pci9111"
+#define PCI9111_HR_DEVICE_ID 0x9111
/* TODO: Add other pci9111 board id */
-#define PCI9111_IO_RANGE 0x0100
+#define PCI9111_IO_RANGE 0x0100
#define PCI9111_FIFO_HALF_SIZE 512
@@ -134,27 +135,29 @@ TODO:
/* IO address map */
-#define PCI9111_REGISTER_AD_FIFO_VALUE 0x00 /* AD Data stored in FIFO */
-#define PCI9111_REGISTER_DA_OUTPUT 0x00
-#define PCI9111_REGISTER_DIGITAL_IO 0x02
-#define PCI9111_REGISTER_EXTENDED_IO_PORTS 0x04
-#define PCI9111_REGISTER_AD_CHANNEL_CONTROL 0x06 /* Channel selection */
-#define PCI9111_REGISTER_AD_CHANNEL_READBACK 0x06
-#define PCI9111_REGISTER_INPUT_SIGNAL_RANGE 0x08
-#define PCI9111_REGISTER_RANGE_STATUS_READBACK 0x08
-#define PCI9111_REGISTER_TRIGGER_MODE_CONTROL 0x0A
-#define PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK 0x0A
-#define PCI9111_REGISTER_SOFTWARE_TRIGGER 0x0E
-#define PCI9111_REGISTER_INTERRUPT_CONTROL 0x0C
+#define PCI9111_REGISTER_AD_FIFO_VALUE 0x00 /* AD Data stored
+ in FIFO */
+#define PCI9111_REGISTER_DA_OUTPUT 0x00
+#define PCI9111_REGISTER_DIGITAL_IO 0x02
+#define PCI9111_REGISTER_EXTENDED_IO_PORTS 0x04
+#define PCI9111_REGISTER_AD_CHANNEL_CONTROL 0x06 /* Channel
+ selection */
+#define PCI9111_REGISTER_AD_CHANNEL_READBACK 0x06
+#define PCI9111_REGISTER_INPUT_SIGNAL_RANGE 0x08
+#define PCI9111_REGISTER_RANGE_STATUS_READBACK 0x08
+#define PCI9111_REGISTER_TRIGGER_MODE_CONTROL 0x0A
+#define PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK 0x0A
+#define PCI9111_REGISTER_SOFTWARE_TRIGGER 0x0E
+#define PCI9111_REGISTER_INTERRUPT_CONTROL 0x0C
#define PCI9111_REGISTER_8254_COUNTER_0 0x40
#define PCI9111_REGISTER_8254_COUNTER_1 0x42
-#define PCI9111_REGISTER_8254_COUNTER_2 0X44
+#define PCI9111_REGISTER_8254_COUNTER_2 0X44
#define PCI9111_REGISTER_8254_CONTROL 0x46
-#define PCI9111_REGISTER_INTERRUPT_CLEAR 0x48
+#define PCI9111_REGISTER_INTERRUPT_CLEAR 0x48
-#define PCI9111_TRIGGER_MASK 0x0F
-#define PCI9111_PTRG_OFF (0 << 3)
-#define PCI9111_PTRG_ON (1 << 3)
+#define PCI9111_TRIGGER_MASK 0x0F
+#define PCI9111_PTRG_OFF (0 << 3)
+#define PCI9111_PTRG_ON (1 << 3)
#define PCI9111_EITS_EXTERNAL (1 << 2)
#define PCI9111_EITS_INTERNAL (0 << 2)
#define PCI9111_TPST_SOFTWARE_TRIGGER (0 << 1)
@@ -164,9 +167,9 @@ TODO:
#define PCI9111_ISC0_SET_IRQ_ON_ENDING_OF_AD_CONVERSION (0 << 0)
#define PCI9111_ISC0_SET_IRQ_ON_FIFO_HALF_FULL (1 << 0)
-#define PCI9111_ISC1_SET_IRQ_ON_TIMER_TICK (0 << 1)
-#define PCI9111_ISC1_SET_IRQ_ON_EXT_TRG (1 << 1)
-#define PCI9111_FFEN_SET_FIFO_ENABLE (0 << 2)
+#define PCI9111_ISC1_SET_IRQ_ON_TIMER_TICK (0 << 1)
+#define PCI9111_ISC1_SET_IRQ_ON_EXT_TRG (1 << 1)
+#define PCI9111_FFEN_SET_FIFO_ENABLE (0 << 2)
#define PCI9111_FFEN_SET_FIFO_DISABLE (1 << 2)
#define PCI9111_CHANNEL_MASK 0x0F
@@ -177,7 +180,7 @@ TODO:
#define PCI9111_FIFO_FULL_MASK 0x40
#define PCI9111_AD_BUSY_MASK 0x80
-#define PCI9111_IO_BASE dev->iobase
+#define PCI9111_IO_BASE (dev->iobase)
/*
* Define inlined function
@@ -189,8 +192,9 @@ TODO:
#define pci9111_trigger_and_autoscan_set(flags) \
outb(flags, PCI9111_IO_BASE+PCI9111_REGISTER_TRIGGER_MODE_CONTROL)
-#define pci9111_interrupt_and_fifo_get() \
- ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK) >> 4) &0x03)
+#define pci9111_interrupt_and_fifo_get() \
+ ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK) >> 4) \
+ &0x03)
#define pci9111_interrupt_and_fifo_set(flags) \
outb(flags, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL)
@@ -201,38 +205,47 @@ TODO:
#define pci9111_software_trigger() \
outb(0, PCI9111_IO_BASE+PCI9111_REGISTER_SOFTWARE_TRIGGER)
-#define pci9111_fifo_reset() \
- outb(PCI9111_FFEN_SET_FIFO_ENABLE, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL); \
- outb(PCI9111_FFEN_SET_FIFO_DISABLE, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL); \
- outb(PCI9111_FFEN_SET_FIFO_ENABLE, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL)
+#define pci9111_fifo_reset() do { \
+ outb(PCI9111_FFEN_SET_FIFO_ENABLE, \
+ PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL); \
+ outb(PCI9111_FFEN_SET_FIFO_DISABLE, \
+ PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL); \
+ outb(PCI9111_FFEN_SET_FIFO_ENABLE, \
+ PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL); \
+ } while (0)
#define pci9111_is_fifo_full() \
((inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)& \
- PCI9111_FIFO_FULL_MASK)==0)
+ PCI9111_FIFO_FULL_MASK) == 0)
#define pci9111_is_fifo_half_full() \
((inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)& \
- PCI9111_FIFO_HALF_FULL_MASK)==0)
+ PCI9111_FIFO_HALF_FULL_MASK) == 0)
#define pci9111_is_fifo_empty() \
((inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)& \
- PCI9111_FIFO_EMPTY_MASK)==0)
+ PCI9111_FIFO_EMPTY_MASK) == 0)
-#define pci9111_ai_channel_set(channel) \
- outb((channel)&PCI9111_CHANNEL_MASK, PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_CONTROL)
+#define pci9111_ai_channel_set(channel) \
+ outb((channel)&PCI9111_CHANNEL_MASK, \
+ PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_CONTROL)
-#define pci9111_ai_channel_get() \
- inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_READBACK)&PCI9111_CHANNEL_MASK
+#define pci9111_ai_channel_get() \
+ (inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_READBACK) \
+ &PCI9111_CHANNEL_MASK)
-#define pci9111_ai_range_set(range) \
- outb((range)&PCI9111_RANGE_MASK, PCI9111_IO_BASE+PCI9111_REGISTER_INPUT_SIGNAL_RANGE)
+#define pci9111_ai_range_set(range) \
+ outb((range)&PCI9111_RANGE_MASK, \
+ PCI9111_IO_BASE+PCI9111_REGISTER_INPUT_SIGNAL_RANGE)
-#define pci9111_ai_range_get() \
- inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)&PCI9111_RANGE_MASK
+#define pci9111_ai_range_get() \
+ (inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK) \
+ &PCI9111_RANGE_MASK)
-#define pci9111_ai_get_data() \
- ((inw(PCI9111_IO_BASE+PCI9111_REGISTER_AD_FIFO_VALUE)>>4)&PCI9111_AI_RESOLUTION_MASK) \
- ^ PCI9111_AI_RESOLUTION_2_CMP_BIT
+#define pci9111_ai_get_data() \
+ (((inw(PCI9111_IO_BASE+PCI9111_REGISTER_AD_FIFO_VALUE)>>4) \
+ &PCI9111_AI_RESOLUTION_MASK) \
+ ^ PCI9111_AI_RESOLUTION_2_CMP_BIT)
#define pci9111_hr_ai_get_data() \
(inw(PCI9111_IO_BASE+PCI9111_REGISTER_AD_FIFO_VALUE) & PCI9111_HR_AI_RESOLUTION_MASK) \
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH] Staging: comedi: Fixed long lines in gsc_hpdi.c
2010-05-31 9:19 [PATCH] Staging: comedi: Checkpatch cleanups in adl_pci9111.c Mark
@ 2010-05-31 9:19 ` Mark
0 siblings, 0 replies; 2+ messages in thread
From: Mark @ 2010-05-31 9:19 UTC (permalink / raw)
To: gregkh
Cc: Mark, Bill Pemberton, Dirk Hohndel, Mithlesh Thukral, Jiri Slaby,
devel, linux-kernel
This patch fixes some long line lengths in gsc_hpdi.c as found by the
checkpatch.pl tool
Signed-off-by: Mark Rankilor <reodge@gmail.com>
---
drivers/staging/comedi/drivers/gsc_hpdi.c | 30 +++++++++++++++++++---------
1 files changed, 20 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index 51f12bf..17c4f1f 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -311,17 +311,25 @@ struct hpdi_private {
void *plx9080_iobase;
void *hpdi_iobase;
uint32_t *dio_buffer[NUM_DMA_BUFFERS]; /* dma buffers */
- dma_addr_t dio_buffer_phys_addr[NUM_DMA_BUFFERS]; /* physical addresses of dma buffers */
- struct plx_dma_desc *dma_desc; /* array of dma descriptors read by plx9080, allocated to get proper alignment */
- dma_addr_t dma_desc_phys_addr; /* physical address of dma descriptor array */
+ /* physical addresses of dma buffers */
+ dma_addr_t dio_buffer_phys_addr[NUM_DMA_BUFFERS];
+ /* array of dma descriptors read by plx9080, allocated to get proper
+ * alignment */
+ struct plx_dma_desc *dma_desc;
+ /* physical address of dma descriptor array */
+ dma_addr_t dma_desc_phys_addr;
unsigned int num_dma_descriptors;
- uint32_t *desc_dio_buffer[NUM_DMA_DESCRIPTORS]; /* pointer to start of buffers indexed by descriptor */
- volatile unsigned int dma_desc_index; /* index of the dma descriptor that is currently being used */
+ /* pointer to start of buffers indexed by descriptor */
+ uint32_t *desc_dio_buffer[NUM_DMA_DESCRIPTORS];
+ /* index of the dma descriptor that is currently being used */
+ volatile unsigned int dma_desc_index;
unsigned int tx_fifo_size;
unsigned int rx_fifo_size;
volatile unsigned long dio_count;
- volatile uint32_t bits[24]; /* software copies of values written to hpdi registers */
- volatile unsigned int block_size; /* number of bytes at which to generate COMEDI_CB_BLOCK events */
+ /* software copies of values written to hpdi registers */
+ volatile uint32_t bits[24];
+ /* number of bytes at which to generate COMEDI_CB_BLOCK events */
+ volatile unsigned int block_size;
unsigned dio_config_output:1;
};
@@ -570,7 +578,8 @@ static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return -ENOMEM;
pcidev = NULL;
- for (i = 0; i < ARRAY_SIZE(hpdi_boards) && dev->board_ptr == NULL; i++) {
+ for (i = 0; i < ARRAY_SIZE(hpdi_boards) &&
+ dev->board_ptr == NULL; i++) {
do {
pcidev = pci_get_subsys(PCI_VENDOR_ID_PLX,
hpdi_boards[i].device_id,
@@ -618,7 +627,7 @@ static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* remap, won't work with 2.0 kernels but who cares */
priv(dev)->plx9080_iobase = ioremap(priv(dev)->plx9080_phys_iobase,
pci_resource_len(pcidev,
- PLX9080_BADDRINDEX));
+ PLX9080_BADDRINDEX));
priv(dev)->hpdi_iobase =
ioremap(priv(dev)->hpdi_phys_iobase,
pci_resource_len(pcidev, HPDI_BADDRINDEX));
@@ -769,7 +778,8 @@ static int di_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s,
if (err)
return 1;
- /* step 2: make sure trigger sources are unique and mutually compatible */
+ /* step 2: make sure trigger sources are unique and mutually
+ * compatible */
/* uniqueness check */
if (cmd->stop_src != TRIG_COUNT && cmd->stop_src != TRIG_NONE)
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-05-31 9:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-27 9:39 [PATCH] Staging: comedi: Fixed long lines in gsc_hpdi.c Mark
-- strict thread matches above, loose matches on Subject: below --
2010-05-31 9:19 [PATCH] Staging: comedi: Checkpatch cleanups in adl_pci9111.c Mark
2010-05-31 9:19 ` [PATCH] Staging: comedi: Fixed long lines in gsc_hpdi.c Mark
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).