From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757117Ab0EaTkr (ORCPT ); Mon, 31 May 2010 15:40:47 -0400 Received: from proofpoint-cluster.metrocast.net ([65.175.128.136]:12219 "EHLO proofpoint-cluster.metrocast.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756922Ab0EaTkp (ORCPT ); Mon, 31 May 2010 15:40:45 -0400 X-Greylist: delayed 573 seconds by postgrey-1.27 at vger.kernel.org; Mon, 31 May 2010 15:40:45 EDT Subject: Re: 2.6.35-rc1 fails to boot: OOPS in ir_register_class From: Andy Walls To: Torsten Kaiser Cc: Linux Kernel Mailing List , Mauro Carvalho Chehab , linux-media@vger.kernel.org In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Date: Mon, 31 May 2010 15:31:21 -0400 Message-ID: <1275334281.2261.38.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.28.3 (2.28.3-1.fc12) Content-Transfer-Encoding: 7bit X-Proofpoint-Virus-Version: vendor=fsecure engine=1.12.8161:2.4.5,1.2.40,4.0.166 definitions=2010-05-31_03:2010-02-06,2010-05-31,2010-05-31 signatures=0 X-Proofpoint-Spam-Details: rule=notspam policy=default score=0 spamscore=0 ipscore=0 phishscore=0 bulkscore=0 adultscore=0 classifier=spam adjust=0 reason=mlx engine=5.0.0-1005130000 definitions=main-1005310134 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Mon, 2010-05-31 at 07:25 +0200, Torsten Kaiser wrote: > Trying to boot the new -rc1 it fails with the following OOPS: > [ 3.454804] IR NEC protocol handler initialized > [ 3.461310] IR RC5(x) protocol handler initialized > [ 3.467865] IR RC6 protocol handler initialized > [ 3.474070] IR JVC protocol handler initialized > [ 3.480257] IR Sony protocol handler initialized > [ 3.480259] Linux video capture interface: v2.00 > [ 3.480722] bttv: driver version 0.9.18 loaded > [ 3.480724] bttv: using 8 buffers with 2080k (520 pages) each for capture > [ 3.507950] bttv: Bt8xx card found (0). > [ 3.513845] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19 > [ 3.521339] bttv 0000:05:06.0: PCI INT A -> Link[LNKC] -> GSI 19 > (level, low) -> IRQ 19 > [ 3.531039] bttv0: Bt878 (rev 17) at 0000:05:06.0, irq: 19, > latency: 64, mmio: 0xeefff000 > [ 3.541062] bttv0: detected: Hauppauge WinTV [card=10], PCI > subsystem ID is 0070:13eb > [ 3.550946] bttv0: using: Hauppauge (bt878) [card=10,autodetected] > [ 3.561433] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] > [ 3.593765] usb 2-6: new low speed USB device using ohci_hcd and address 2 > [ 3.599016] tveeprom 4-0050: Hauppauge model 61344, rev D421, serial# 3902813 > [ 3.599018] tveeprom 4-0050: tuner model is Philips FM1216 (idx 21, type 5) > [ 3.599021] tveeprom 4-0050: TV standards PAL(B/G) (eeprom 0x04) > [ 3.599022] tveeprom 4-0050: audio processor is MSP3415 (idx 6) > [ 3.599024] tveeprom 4-0050: has radio > [ 3.599025] bttv0: Hauppauge eeprom indicates model#61344 > [ 3.599027] bttv0: tuner type=5 > [ 3.609618] msp3400 4-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw]) > [ 3.609620] msp3400 4-0040: msp3400 supports nicam, mode is autodetect > [ 3.621863] tuner 4-0061: chip found @ 0xc2 (bt878 #0 [sw]) > [ 3.622168] tuner-simple 4-0061: creating new instance > [ 3.622170] tuner-simple 4-0061: type set to 5 (Philips PAL_BG > (FI1216 and compatibles)) > [ 3.622882] bttv0: registered device video0 > [ 3.622940] bttv0: registered device vbi0 > [ 3.622997] bttv0: registered device radio0 > [ 3.632337] bttv0: PLL: 28636363 => 35468950 .. ok > [ 3.683096] Registered IR keymap rc-rc5-tv > [ 3.683110] BUG: unable to handle kernel NULL pointer dereference at (null) > [ 3.683113] IP: [] ir_register_class+0x59/0x160 > [ 3.683122] PGD 0 > [ 3.683124] Oops: 0000 [#1] SMP > [ 3.683125] last sysfs file: > [ 3.683127] CPU 2 > [ 3.683129] Modules linked in: > [ 3.683130] > [ 3.683133] Pid: 1, comm: swapper Not tainted 2.6.35-rc1 #1 KFN5-D > SLI/KFN5-D SLI > [ 3.683135] RIP: 0010:[] [] > ir_register_class+0x59/0x160 > [ 3.683139] RSP: 0018:ffff88011ff09cd0 EFLAGS: 00010246 > [ 3.683141] RAX: 0000000000000000 RBX: ffff88011f3c1a00 RCX: ffffffff81a5baa0 > [ 3.683142] RDX: 0000000000000000 RSI: ffffffff817d24f0 RDI: ffff88011f3c1a00 > [ 3.683144] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 > [ 3.683146] R10: 0000000000000000 R11: 0000000000000021 R12: ffffffff817d6960 > [ 3.683147] R13: ffff88011f223000 R14: ffff88011f3c1a00 R15: ffff88011f3c1b40 > [ 3.683150] FS: 00000000010f8870(0000) GS:ffff880080200000(0000) > knlGS:0000000000000000 > [ 3.683151] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > [ 3.683153] CR2: 0000000000000000 CR3: 0000000001a05000 CR4: 00000000000006e0 > [ 3.683155] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 3.683157] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > [ 3.683159] Process swapper (pid: 1, threadinfo ffff88011ff08000, > task ffff88007ff48000) > [ 3.683160] Stack: > [ 3.683162] ffff88011f223000 ffffffff81a5ab30 ffff88011f223000 > ffffffff817d6960 > [ 3.683164] <0> 0000000000000021 ffffffff813eb90a ffff880100000028 > ffffffff817d240e > [ 3.683166] <0> ffff88011f3c1b68 0000000000000282 ffff8800070b54e0 > ffff88011f35f100 > [ 3.683169] Call Trace: > [ 3.683174] [] ? __ir_input_register+0x2ba/0x350 > [ 3.683178] [] ? ir_probe+0x36a/0x4f0 > [ 3.683181] [] ? ir_probe+0x0/0x4f0 > [ 3.683185] [] ? i2c_device_probe+0xea/0x120 > [ 3.683188] [] ? driver_sysfs_add+0x5a/0x80 > [ 3.683190] [] ? driver_probe_device+0x83/0x190 > [ 3.683193] [] ? i2c_device_match+0x54/0x70 > [ 3.683195] [] ? __driver_attach+0x93/0xa0 > [ 3.683197] [] ? __driver_attach+0x0/0xa0 > [ 3.683201] [] ? bus_for_each_dev+0x58/0x80 > [ 3.683203] [] ? bus_add_driver+0xb0/0x250 > [ 3.683206] [] ? driver_register+0x6a/0x130 > [ 3.683209] [] ? __pci_register_driver+0x80/0xc0 > [ 3.683212] [] ? i2c_register_driver+0x30/0xb0 > [ 3.683217] [] ? bttv_init_module+0x0/0xde > [ 3.683220] [] ? ir_init+0x0/0x14 > [ 3.683224] [] ? do_one_initcall+0x34/0x190 > [ 3.683227] [] ? kernel_init+0x143/0x1cd > [ 3.683230] [] ? kernel_thread_helper+0x4/0x10 > [ 3.683232] [] ? kernel_init+0x0/0x1cd > [ 3.683235] [] ? kernel_thread_helper+0x0/0x10 > [ 3.683237] Code: c7 80 a5 ba 81 48 89 c3 e8 b5 8f e0 ff 85 c0 89 > c5 78 62 48 8b 93 78 01 00 00 48 c7 c1 a0 ba a5 81 48 c7 c6 f0 24 7d > 81 48 89 df <8b> 12 48 c7 83 20 01 00 00 20 ba a5 81 85 d2 48 c7 c2 e0 > ba a5 Refer to the linux/drivers/media/IR/ir-sysfs.c:ir_register_class(). That Oops code disassembles to this: 33: 48 89 c3 mov %rax,%rbx 36: e8 b5 8f e0 ff callq 0xffffffffffe08ff0 <--- devno = find_first_zero_bit() 3b: 85 c0 test %eax,%eax <--- if (unlikely(devno < 0)) 3d: 89 c5 mov %eax,%ebp 3f: 78 62 js 0xa3 <--- return devno 41: 48 8b 93 78 01 00 00 mov 0x178(%rbx),%rdx <--- %rdx = irdev->props 48: 48 c7 c1 a0 ba a5 81 mov $0xffffffff81a5baa0,%rcx 4f: 48 c7 c6 f0 24 7d 81 mov $0xffffffff817d24f0,%rsi 56: 48 89 df mov %rbx,%rdi 59: 8b 12 mov (%rdx),%edx <-------- Ooops here %edx = irdev->props->driver_type 5b: 48 c7 83 20 01 00 00 movq $0xffffffff81a5ba20,0x120(%rbx) As best I can tell, in this oops irdev->props was NULL in ir_register_class(). I don't know if ir_dev->props is always supposed to get set, but __ir_input_register() appears to check for it being NULL and then allows the call to ir_register_class() to happen. Of note is that if one fixes ir_register_class() to handle a NULL props pointer, the next if() statement in __ir_input_register() will then try to dereference the NULL pointer and then Oops. Regards, Andy