From: Nigel Cunningham <nigel@tuxonice.net>
To: "Rafael J. Wysocki" <rjw@sisk.pl>,
Linux PM <linux-pm@lists.linux-foundation.org>,
LKML <linux-kernel@vger.kernel.org>,
TuxOnIce-devel <tuxonice-devel@tuxonice.net>
Subject: [PATCH 17/21] Hibernation: Remove swap_map_pages
Date: Wed, 2 Jun 2010 22:19:16 +1000 [thread overview]
Message-ID: <1275481160-31150-18-git-send-email-nigel@tuxonice.net> (raw)
In-Reply-To: <1275481160-31150-1-git-send-email-nigel@tuxonice.net>
Stop storing swap_map pages in the image. This removes the need
for a wait_on_bio_chain every MAP_PAGE_ENTRIES pages and thus
allows the whole image to be written using async I/O.
Signed-off-by: Nigel Cunningham <nigel@tuxonice.net>
---
kernel/power/block_io.c | 61 +++-------------------------------------------
1 files changed, 4 insertions(+), 57 deletions(-)
diff --git a/kernel/power/block_io.c b/kernel/power/block_io.c
index c9569e5..66cdc5a 100644
--- a/kernel/power/block_io.c
+++ b/kernel/power/block_io.c
@@ -156,7 +156,6 @@ struct swap_map_page {
struct swap_map_handle {
struct swap_map_page *cur;
- sector_t cur_swap;
unsigned int k;
};
@@ -168,8 +167,7 @@ extern struct hib_extent_state sector_extents;
/* Calculate the overhead needed for storing n pages */
unsigned int hib_bio_overhead(unsigned int nr_pages)
{
- return DIV_ROUND_UP(nr_pages, MAP_PAGE_ENTRIES) +
- DIV_ROUND_UP(hib_extents_storage_needed(§or_extents),
+ return DIV_ROUND_UP(hib_extents_storage_needed(§or_extents),
PAGE_SIZE);
}
@@ -235,12 +233,8 @@ int hib_bio_prepare_write(void)
result = hib_extents_store(§or_extents);
result2 = hib_flush_write_buffer();
- handle.cur_swap = hib_extent_next(§or_extents);
handle.k = 0;
- if (!handle.cur_swap)
- result = -ENOSPC;
-
if (result || result2)
release_swap_writer();
@@ -249,41 +243,17 @@ int hib_bio_prepare_write(void)
int swap_write_page(void *buf, int sync)
{
- int error = 0;
sector_t offset;
if (!handle.cur)
return -EINVAL;
offset = hib_extent_next(§or_extents);
- error = write_page(buf, offset, sync);
- if (error)
- return error;
- handle.cur->entries[handle.k++] = offset;
- if (handle.k >= MAP_PAGE_ENTRIES) {
- error = hib_wait_on_bio_chain();
- if (error)
- goto out;
- offset = hib_extent_next(§or_extents);
- if (!offset)
- return -ENOSPC;
- handle.cur->next_swap = offset;
- error = write_page(handle.cur, handle.cur_swap, 1);
- if (error)
- goto out;
- memset(handle.cur, 0, PAGE_SIZE);
- handle.cur_swap = offset;
- handle.k = 0;
- }
- out:
- return error;
+ return write_page(buf, offset, sync);
}
int flush_swap_writer(void)
{
- if (handle.cur && handle.cur_swap)
- return write_page(handle.cur, handle.cur_swap, 1);
- else
- return -EINVAL;
+ return hib_wait_on_bio_chain();
}
/**
@@ -301,7 +271,6 @@ void release_swap_reader(void)
int get_swap_reader(unsigned int *flags_p, sector_t first_page)
{
int error;
- sector_t offset;
handle.cur = (struct swap_map_page *)get_zeroed_page(__GFP_WAIT | __GFP_HIGH);
if (!handle.cur)
@@ -330,41 +299,19 @@ int get_swap_reader(unsigned int *flags_p, sector_t first_page)
return error;
}
- offset = hib_extent_next(§or_extents);
-
- /* Now read the first swap_map_page */
- error = hib_bio_read_page(offset, handle.cur, 1);
- if (error) {
- release_swap_reader();
- return error;
- }
-
return error;
}
int swap_read_page(void *buf, int sync)
{
sector_t offset;
- int error;
if (!handle.cur)
return -EINVAL;
offset = hib_extent_next(§or_extents);
if (!offset)
return -EFAULT;
- error = hib_bio_read_page(offset, buf, sync);
- if (error)
- return error;
- if (++handle.k >= MAP_PAGE_ENTRIES) {
- error = hib_wait_on_bio_chain();
- handle.k = 0;
- offset = hib_extent_next(§or_extents);
- if (!offset)
- release_swap_reader();
- else if (!error)
- error = hib_bio_read_page(offset, handle.cur, 1);
- }
- return error;
+ return hib_bio_read_page(offset, buf, sync);
}
/* Part Page I/O functions */
--
1.7.0.4
next prev parent reply other threads:[~2010-06-02 12:20 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-02 12:18 Nigel's current for-rafael queue Nigel Cunningham
2010-06-02 12:19 ` [PATCH 01/21] Hibernation: Swap iteration functions Nigel Cunningham
2010-06-02 12:19 ` [PATCH 02/21] Hibernation: Move root_swap declaration Nigel Cunningham
2010-06-02 12:19 ` [PATCH 03/21] Hibernation: Add mass swap allocation routine Nigel Cunningham
2010-06-02 12:19 ` [PATCH 04/21] Hibernation: Switch to preallocating swap Nigel Cunningham
2010-06-02 12:19 ` [PATCH 05/21] Hiberation: Fix speed display Nigel Cunningham
2010-06-02 12:19 ` [PATCH 06/21] Hibernation: Generic extents support Nigel Cunningham
2010-06-02 12:19 ` [PATCH 07/21] Hibernation: Iterate over sectors not swap entries Nigel Cunningham
2010-06-02 12:19 ` [PATCH 08/21] Hibernation: Stop passing swap_map_handle struct Nigel Cunningham
2010-06-02 12:19 ` [PATCH 09/21] Hibernation: Stop passing bio_chain around Nigel Cunningham
2010-06-02 12:19 ` [PATCH 10/21] Hibernation: Move block i/o fns to block_io.c Nigel Cunningham
2010-06-02 12:19 ` [PATCH 11/21] Hibernation: Partial page I/O support Nigel Cunningham
2010-06-02 12:19 ` [PATCH 12/21] Hibernation: Extent save/load routines Nigel Cunningham
2010-06-02 12:19 ` [PATCH 13/21] Hibernation: Store block extents at start of image Nigel Cunningham
2010-06-02 12:19 ` [PATCH 14/21] Hibernation: Use block extents for reading image Nigel Cunningham
2010-06-02 12:19 ` [PATCH 15/21] Remove first_sector from swap_map_handle Nigel Cunningham
2010-06-02 12:19 ` [PATCH 16/21] Hibernation: Replace bio chain Nigel Cunningham
2010-06-02 12:19 ` Nigel Cunningham [this message]
2010-06-02 12:19 ` [PATCH 18/21] Hibernation: Remove wait_on_bio_chain result Nigel Cunningham
2010-06-02 12:19 ` [PATCH 19/21] Hibernation: Prepare for handle.cur removal Nigel Cunningham
2010-06-02 12:19 ` [PATCH 20/21] Hibernation: Remove swap_map structure Nigel Cunningham
2010-06-02 12:19 ` [PATCH 21/21] Hibernation: Remove now-empty routines Nigel Cunningham
2010-08-03 6:55 ` Nigel's current for-rafael queue Pavel Machek
2010-08-03 7:00 ` Nigel Cunningham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1275481160-31150-18-git-send-email-nigel@tuxonice.net \
--to=nigel@tuxonice.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=rjw@sisk.pl \
--cc=tuxonice-devel@tuxonice.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).