From: Lars-Peter Clausen <lars@metafoo.de>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
Lars-Peter Clausen <lars@metafoo.de>
Subject: [RFC][PATCH 13/26] MIPS: JZ4740: Add platform devices
Date: Wed, 2 Jun 2010 21:10:29 +0200 [thread overview]
Message-ID: <1275505832-17185-5-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1275505397-16758-1-git-send-email-lars@metafoo.de>
This patch adds platform devices for all the JZ4740 platform drivers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
arch/mips/include/asm/mach-jz4740/platform.h | 36 ++++
arch/mips/jz4740/platform.c | 288 ++++++++++++++++++++++++++
2 files changed, 324 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/include/asm/mach-jz4740/platform.h
create mode 100644 arch/mips/jz4740/platform.c
diff --git a/arch/mips/include/asm/mach-jz4740/platform.h b/arch/mips/include/asm/mach-jz4740/platform.h
new file mode 100644
index 0000000..7a51c70
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/platform.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ * JZ4740 platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+
+#ifndef __JZ4740_PLATFORM_H
+#define __JZ4740_PLATFORM_H
+
+#include <linux/platform_device.h>
+
+extern struct platform_device jz4740_usb_ohci_device;
+extern struct platform_device jz4740_udc_device;
+extern struct platform_device jz4740_mmc_device;
+extern struct platform_device jz4740_rtc_device;
+extern struct platform_device jz4740_i2c_device;
+extern struct platform_device jz4740_nand_device;
+extern struct platform_device jz4740_framebuffer_device;
+extern struct platform_device jz4740_i2s_device;
+extern struct platform_device jz4740_codec_device;
+extern struct platform_device jz4740_adc_device;
+extern struct platform_device jz4740_battery_device;
+
+void jz4740_serial_device_register(void);
+
+#endif
diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c
new file mode 100644
index 0000000..734b441
--- /dev/null
+++ b/arch/mips/jz4740/platform.c
@@ -0,0 +1,288 @@
+/*
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ * JZ4740 platform devices
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+
+#include <asm/mach-jz4740/platform.h>
+#include <asm/mach-jz4740/base.h>
+#include <asm/mach-jz4740/irq.h>
+
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+
+#include "serial.h"
+#include "clock.h"
+
+/* OHCI (USB full speed host controller) */
+static struct resource jz4740_usb_ohci_resources[] = {
+ [0] = {
+ .start = CPHYSADDR(JZ4740_UHC_BASE_ADDR),
+ .end = CPHYSADDR(JZ4740_UHC_BASE_ADDR) + 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = JZ4740_IRQ_UHC,
+ .end = JZ4740_IRQ_UHC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32)0;
+
+struct platform_device jz4740_usb_ohci_device = {
+ .name = "jz4740-ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(jz4740_usb_ohci_resources),
+ .resource = jz4740_usb_ohci_resources,
+};
+
+/* UDC (USB gadget controller) */
+static struct resource jz4740_usb_gdt_resources[] = {
+ [0] = {
+ .start = CPHYSADDR(JZ4740_UDC_BASE_ADDR),
+ .end = CPHYSADDR(JZ4740_UDC_BASE_ADDR) + 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = JZ4740_IRQ_UDC,
+ .end = JZ4740_IRQ_UDC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 jz4740_udc_dmamask = ~(u32)0;
+
+struct platform_device jz4740_udc_device = {
+ .name = "jz-udc",
+ .id = -1,
+ .dev = {
+ .dma_mask = &jz4740_udc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(jz4740_usb_gdt_resources),
+ .resource = jz4740_usb_gdt_resources,
+};
+
+/** MMC/SD controller **/
+static struct resource jz4740_mmc_resources[] = {
+ [0] = {
+ .start = CPHYSADDR(JZ4740_MSC_BASE_ADDR),
+ .end = CPHYSADDR(JZ4740_MSC_BASE_ADDR) + 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = JZ4740_IRQ_MSC,
+ .end = JZ4740_IRQ_MSC,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 jz4740_mmc_dmamask = ~(u32)0;
+
+struct platform_device jz4740_mmc_device = {
+ .name = "jz4740-mmc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &jz4740_mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(jz4740_mmc_resources),
+ .resource = jz4740_mmc_resources,
+};
+
+static struct resource jz4740_rtc_resources[] = {
+ [0] = {
+ .start = CPHYSADDR(JZ4740_RTC_BASE_ADDR),
+ .end = CPHYSADDR(JZ4740_RTC_BASE_ADDR) + 0x38 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = JZ4740_IRQ_RTC,
+ .end = JZ4740_IRQ_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device jz4740_rtc_device = {
+ .name = "jz4740-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(jz4740_rtc_resources),
+ .resource = jz4740_rtc_resources,
+};
+
+/** I2C controller **/
+static struct resource jz4740_i2c_resources[] = {
+ [0] = {
+ .start = CPHYSADDR(JZ4740_I2C_BASE_ADDR),
+ .end = CPHYSADDR(JZ4740_I2C_BASE_ADDR) + 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = JZ4740_IRQ_I2C,
+ .end = JZ4740_IRQ_I2C,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 jz4740_i2c_dmamask = ~(u32)0;
+
+struct platform_device jz4740_i2c_device = {
+ .name = "jz_i2c",
+ .id = 0,
+ .dev = {
+ .dma_mask = &jz4740_i2c_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(jz4740_i2c_resources),
+ .resource = jz4740_i2c_resources,
+};
+
+static struct resource jz4740_nand_resources[] = {
+ [0] = {
+ .start = CPHYSADDR(JZ4740_EMC_BASE_ADDR),
+ .end = CPHYSADDR(JZ4740_EMC_BASE_ADDR) + 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device jz4740_nand_device = {
+ .name = "jz4740-nand",
+ .num_resources = ARRAY_SIZE(jz4740_nand_resources),
+ .resource = jz4740_nand_resources,
+};
+
+static struct resource jz4740_framebuffer_resources[] = {
+ [0] = {
+ .start = CPHYSADDR(JZ4740_LCD_BASE_ADDR),
+ .end = CPHYSADDR(JZ4740_LCD_BASE_ADDR) + 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static u64 jz4740_fb_dmamask = ~(u32)0;
+
+struct platform_device jz4740_framebuffer_device = {
+ .name = "jz4740-fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(jz4740_framebuffer_resources),
+ .resource = jz4740_framebuffer_resources,
+ .dev = {
+ .dma_mask = &jz4740_fb_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+static struct resource jz4740_i2s_resources[] = {
+ [0] = {
+ .start = CPHYSADDR(JZ4740_AIC_BASE_ADDR),
+ .end = CPHYSADDR(JZ4740_AIC_BASE_ADDR) + 0x38 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device jz4740_i2s_device = {
+ .name = "jz4740-i2s",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(jz4740_i2s_resources),
+ .resource = jz4740_i2s_resources,
+};
+
+static struct resource jz4740_codec_resources[] = {
+ [0] = {
+ .start = CPHYSADDR(JZ4740_AIC_BASE_ADDR) + 0x80,
+ .end = CPHYSADDR(JZ4740_AIC_BASE_ADDR) + 0x88 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device jz4740_codec_device = {
+ .name = "jz4740-codec",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(jz4740_codec_resources),
+ .resource = jz4740_codec_resources,
+};
+
+static struct resource jz4740_adc_resources[] = {
+ [0] = {
+ .start = CPHYSADDR(JZ4740_SADC_BASE_ADDR),
+ .end = CPHYSADDR(JZ4740_SADC_BASE_ADDR) + 0x30,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = JZ4740_IRQ_SADC,
+ .end = JZ4740_IRQ_SADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device jz4740_adc_device = {
+ .name = "jz4740-adc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(jz4740_adc_resources),
+ .resource = jz4740_adc_resources,
+};
+
+struct platform_device jz4740_battery_device = {
+ .name = "jz4740-battery",
+ .id = -1,
+ .dev = {
+ .parent = &jz4740_adc_device.dev
+ },
+};
+
+/* Serial */
+#define JZ4740_UART_DATA(_id) \
+ { \
+ .flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE, \
+ .iotype = UPIO_MEM, \
+ .regshift = 2, \
+ .serial_out = jz4740_serial_out, \
+ .type = PORT_16550A, \
+ .mapbase = CPHYSADDR(JZ4740_UART ## _id ## _BASE_ADDR), \
+ .irq = JZ4740_IRQ_UART ## _id, \
+ }
+
+static struct plat_serial8250_port jz4740_uart_data[] = {
+ JZ4740_UART_DATA(0),
+ JZ4740_UART_DATA(1),
+ {},
+};
+
+static struct platform_device jz4740_uart_device = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = jz4740_uart_data,
+ },
+};
+
+void jz4740_serial_device_register(void)
+{
+ struct plat_serial8250_port *p;
+
+ for (p = jz4740_uart_data; p->flags != 0; ++p)
+ p->uartclk = jz4740_clock_bdata.ext_rate;
+
+ platform_device_register(&jz4740_uart_device);
+}
--
1.5.6.5
next prev parent reply other threads:[~2010-06-02 19:11 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-02 19:02 [RFC][PATCH 00/26] *** SUBJECT HERE *** Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 01/26] MIPS: Add base support for Ingenic JZ4740 System-on-a-Chip Lars-Peter Clausen
2010-06-03 14:27 ` Florian Fainelli
2010-06-03 17:03 ` Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 02/26] MIPS: jz4740: Add IRQ handler code Lars-Peter Clausen
2010-06-03 14:29 ` Florian Fainelli
2010-06-02 19:02 ` [RFC][PATCH 03/26] MIPS: JZ4740: Add clock API support Lars-Peter Clausen
2010-06-02 22:45 ` Graham Gower
2010-06-03 17:20 ` Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 04/26] MIPS: JZ4740: Add timer support Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 05/26] MIPS: JZ4740: Add clocksource/clockevent support Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 06/26] MIPS: JZ4740: Add power-management and system reset support Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 07/26] MIPS: JZ4740: Add setup code Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 08/26] MIPS: JZ4740: Add gpio support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 09/26] MIPS: JZ4740: Add DMA support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 10/26] MIPS: JZ4740: Add PWM support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 11/26] MIPS: JZ4740: Add serial support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 12/26] MIPS: JZ4740: Add prom support Lars-Peter Clausen
2010-06-02 19:10 ` Lars-Peter Clausen [this message]
2010-06-02 19:10 ` [RFC][PATCH 14/26] MIPS: JZ4740: Add Kbuild files Lars-Peter Clausen
2010-06-04 0:47 ` Ralf Baechle
2010-06-02 19:10 ` [RFC][PATCH 15/26] RTC: Add JZ4740 RTC driver Lars-Peter Clausen
2010-06-05 15:48 ` [rtc-linux] " Wan ZongShun
2010-06-05 17:26 ` Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 16/26] fbdev: Add JZ4740 framebuffer driver Lars-Peter Clausen
2010-06-02 19:36 ` Andrew Morton
2010-06-02 20:05 ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 17/26] MTD: Nand: Add JZ4740 NAND driver Lars-Peter Clausen
2010-06-13 9:40 ` Artem Bityutskiy
2010-06-02 19:12 ` [RFC][PATCH 18/26] MMC: Add JZ4740 mmc driver Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 19/26] USB: Add JZ4740 ohci support Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 20/26] alsa: ASoC: Add JZ4740 codec driver Lars-Peter Clausen
2010-06-03 5:45 ` [alsa-devel] " Wan ZongShun
2010-06-03 12:03 ` Mark Brown
2010-06-03 12:32 ` Liam Girdwood
2010-06-03 12:50 ` Liam Girdwood
2010-06-03 16:58 ` Lars-Peter Clausen
2010-06-03 17:49 ` Mark Brown
2010-06-03 23:57 ` Lars-Peter Clausen
2010-06-03 23:59 ` Mark Brown
2010-06-02 19:12 ` [RFC][PATCH 21/26] alsa: ASoC: Add JZ4740 ASoC support Lars-Peter Clausen
2010-06-03 3:36 ` [alsa-devel] " Wan ZongShun
2010-06-03 12:48 ` Liam Girdwood
2010-06-03 16:50 ` Lars-Peter Clausen
2010-06-03 17:03 ` Liam Girdwood
2010-06-03 17:16 ` Lars-Peter Clausen
2010-06-03 17:25 ` Liam Girdwood
2010-06-03 17:37 ` Lars-Peter Clausen
2010-06-03 18:14 ` [alsa-devel] " Troy Kisky
2010-11-14 13:29 ` hi!!!! dkisky
2010-06-03 17:55 ` [RFC][PATCH 21/26] alsa: ASoC: Add JZ4740 ASoC support Mark Brown
2010-06-03 19:27 ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 22/26] hwmon: Add JZ4740 ADC driver Lars-Peter Clausen
2010-06-05 17:22 ` Jonathan Cameron
2010-06-05 19:08 ` Lars-Peter Clausen
2010-06-05 21:07 ` [lm-sensors] " Jonathan Cameron
2010-06-05 22:12 ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 23/26] power: Add JZ4740 battery driver Lars-Peter Clausen
2010-06-14 15:51 ` Anton Vorontsov
2010-06-15 17:28 ` Lars-Peter Clausen
2010-06-15 17:34 ` Ralf Baechle
2010-06-16 12:20 ` Mark Brown
2010-06-19 3:48 ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 24/26] MIPS: JZ4740: Add qi_lb60 board support Lars-Peter Clausen
2010-06-02 19:15 ` [RFC][PATCH 25/26] MIPS: Add defconfig for the qi_lb60 board Lars-Peter Clausen
2010-06-02 19:15 ` [RFC][PATCH 26/26] alsa: ASoC: JZ4740: Add qi_lb60 board driver Lars-Peter Clausen
2010-06-03 17:57 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1275505832-17185-5-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).