linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lars-Peter Clausen <lars@metafoo.de>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
	Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH v2 06/26] MIPS: JZ4740: Add power-management and system reset support
Date: Sat, 19 Jun 2010 07:08:11 +0200	[thread overview]
Message-ID: <1276924111-11158-7-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1276924111-11158-1-git-send-email-lars@metafoo.de>

This patch adds support for suspend/resume and poweroff/reboot on a JZ4740 SoC.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
 arch/mips/jz4740/pm.c    |   56 ++++++++++++++++++++++++++++++++
 arch/mips/jz4740/reset.c |   79 ++++++++++++++++++++++++++++++++++++++++++++++
 arch/mips/jz4740/reset.h |    7 ++++
 3 files changed, 142 insertions(+), 0 deletions(-)
 create mode 100644 arch/mips/jz4740/pm.c
 create mode 100644 arch/mips/jz4740/reset.c
 create mode 100644 arch/mips/jz4740/reset.h

diff --git a/arch/mips/jz4740/pm.c b/arch/mips/jz4740/pm.c
new file mode 100644
index 0000000..a999458
--- /dev/null
+++ b/arch/mips/jz4740/pm.c
@@ -0,0 +1,56 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *	JZ4740 SoC power management support
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/suspend.h>
+
+#include <asm/mach-jz4740/clock.h>
+
+#include "clock.h"
+#include "irq.h"
+
+static int jz4740_pm_enter(suspend_state_t state)
+{
+	jz4740_intc_suspend();
+	jz4740_clock_suspend();
+
+	jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_SLEEP);
+
+	__asm__(".set\tmips3\n\t"
+		"wait\n\t"
+		".set\tmips0");
+
+	jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_IDLE);
+
+	jz4740_clock_resume();
+	jz4740_intc_resume();
+
+	return 0;
+}
+
+static struct platform_suspend_ops jz4740_pm_ops = {
+	.valid		= suspend_valid_only_mem,
+	.enter		= jz4740_pm_enter,
+};
+
+static int __init jz4740_pm_init(void)
+{
+	suspend_set_ops(&jz4740_pm_ops);
+	return 0;
+
+}
+late_initcall(jz4740_pm_init);
diff --git a/arch/mips/jz4740/reset.c b/arch/mips/jz4740/reset.c
new file mode 100644
index 0000000..5f1fb95
--- /dev/null
+++ b/arch/mips/jz4740/reset.c
@@ -0,0 +1,79 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+
+#include <asm/mach-jz4740/base.h>
+#include <asm/mach-jz4740/timer.h>
+
+static void jz4740_halt(void)
+{
+	while (1) {
+		__asm__(".set push;\n"
+			".set mips3;\n"
+			"wait;\n"
+			".set pop;\n"
+		);
+	}
+}
+
+#define JZ_REG_WDT_DATA 0x00
+#define JZ_REG_WDT_COUNTER_ENABLE 0x04
+#define JZ_REG_WDT_COUNTER 0x08
+#define JZ_REG_WDT_CTRL 0x0c
+
+static void jz4740_restart(char *command)
+{
+	void __iomem *wdt_base = ioremap(JZ4740_WDT_BASE_ADDR, 0x0f);
+
+	jz4740_timer_enable_watchdog();
+
+	writeb(0, wdt_base + JZ_REG_WDT_COUNTER_ENABLE);
+
+	writew(0, wdt_base + JZ_REG_WDT_COUNTER);
+	writew(0, wdt_base + JZ_REG_WDT_DATA);
+	writew(BIT(2), wdt_base + JZ_REG_WDT_CTRL);
+
+	writeb(1, wdt_base + JZ_REG_WDT_COUNTER_ENABLE);
+	jz4740_halt();
+}
+
+#define JZ_REG_RTC_CTRL		0x00
+#define JZ_REG_RTC_HIBERNATE	0x20
+
+#define JZ_RTC_CTRL_WRDY	BIT(7)
+
+static void jz4740_power_off(void)
+{
+	void __iomem *rtc_base = ioremap(JZ4740_RTC_BASE_ADDR, 0x24);
+	uint32_t ctrl;
+
+	do {
+		ctrl = readl(rtc_base + JZ_REG_RTC_CTRL);
+	} while (!(ctrl & JZ_RTC_CTRL_WRDY));
+
+	writel(1, rtc_base + JZ_REG_RTC_HIBERNATE);
+	jz4740_halt();
+}
+
+void jz4740_reset_init(void)
+{
+	_machine_restart = jz4740_restart;
+	_machine_halt = jz4740_halt;
+	pm_power_off = jz4740_power_off;
+}
diff --git a/arch/mips/jz4740/reset.h b/arch/mips/jz4740/reset.h
new file mode 100644
index 0000000..c57a829
--- /dev/null
+++ b/arch/mips/jz4740/reset.h
@@ -0,0 +1,7 @@
+#ifndef __MIPS_JZ4740_RESET_H__
+#define __MIPS_JZ4740_RESET_H__
+
+extern void jz4740_reset_init(void);
+
+#endif
+
-- 
1.5.6.5


  parent reply	other threads:[~2010-06-19  5:09 UTC|newest]

Thread overview: 111+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-19  5:08 [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 01/26] MIPS: Add base support for " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 02/26] MIPS: jz4740: Add IRQ handler code Lars-Peter Clausen
2010-07-17 12:08   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 03/26] MIPS: JZ4740: Add clock API support Lars-Peter Clausen
2010-06-28  1:24   ` [PATCH v3 " Lars-Peter Clausen
2010-07-17 12:10     ` [PATCH v4] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 04/26] MIPS: JZ4740: Add timer support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 05/26] MIPS: JZ4740: Add clocksource/clockevent support Lars-Peter Clausen
2010-06-19  5:08 ` Lars-Peter Clausen [this message]
2010-06-19  5:08 ` [PATCH v2 07/26] MIPS: JZ4740: Add setup code Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 08/26] MIPS: JZ4740: Add gpio support Lars-Peter Clausen
2010-07-17 12:11   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 09/26] MIPS: JZ4740: Add DMA support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 10/26] MIPS: JZ4740: Add PWM support Lars-Peter Clausen
2010-06-28  1:23   ` [PATCH v3 " Lars-Peter Clausen
2010-07-17 12:12     ` [PATCH v4] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 11/26] MIPS: JZ4740: Add serial support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 12/26] MIPS: JZ4740: Add prom support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 13/26] MIPS: JZ4740: Add platform devices Lars-Peter Clausen
2010-07-17 12:13   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 14/26] MIPS: JZ4740: Add Kbuild files Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 15/26] RTC: Add JZ4740 RTC driver Lars-Peter Clausen
2010-06-19 10:43   ` Marek Vasut
2010-06-19 13:05     ` Lars-Peter Clausen
2010-06-19 13:37       ` Wan ZongShun
2010-06-19 13:53         ` Lars-Peter Clausen
2010-06-19 14:36           ` Wan ZongShun
2010-06-19 14:04       ` Marek Vasut
2010-06-19 17:42         ` Lars-Peter Clausen
2010-06-19 17:53           ` Geert Uytterhoeven
2010-06-19 19:29   ` [PATCH v3] " Lars-Peter Clausen
2010-06-20  1:13     ` [rtc-linux] " Wan ZongShun
2010-06-20  1:23       ` Lars-Peter Clausen
2010-06-20  1:30         ` Wan ZongShun
2010-06-22  5:53     ` Alessandro Zummo
2010-06-19  5:08 ` [PATCH v2 16/26] fbdev: Add JZ4740 framebuffer driver Lars-Peter Clausen
2010-07-04 22:27   ` Lars-Peter Clausen
2010-07-07 23:41     ` Andrew Morton
2010-07-08 13:28       ` Lars-Peter Clausen
2010-07-08 16:46         ` Andrew Morton
2010-07-09  1:26     ` Jaya Kumar
2010-07-09 15:31       ` Lars-Peter Clausen
2010-07-17 12:14   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND driver Lars-Peter Clausen
2010-07-04 22:35   ` [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND Lars-Peter Clausen
2010-07-08  6:06   ` [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND driver Artem Bityutskiy
2010-07-08 13:20     ` Lars-Peter Clausen
2010-07-08 13:19       ` Artem Bityutskiy
2010-07-08 14:02         ` Lars-Peter Clausen
2010-07-08 14:14           ` Artem Bityutskiy
2010-07-17 12:15   ` [PATCH v3] " Lars-Peter Clausen
2010-07-18 16:54     ` Artem Bityutskiy
2010-07-18 17:02       ` Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 18/26] MMC: Add JZ4740 mmc driver Lars-Peter Clausen
2010-06-19 14:46   ` Matt Fleming
2010-06-19 15:29     ` Lars-Peter Clausen
2010-06-28  1:20   ` [PATCH v3] " Lars-Peter Clausen
2010-06-29 20:17     ` Matt Fleming
2010-07-01 15:47       ` Lars-Peter Clausen
2010-06-30 20:55     ` Andrew Morton
2010-07-01 15:45       ` Lars-Peter Clausen
2010-07-12 21:33     ` [PATCH v4] " Lars-Peter Clausen
2010-07-12 21:41       ` Randy Dunlap
2010-07-12 22:07         ` Lars-Peter Clausen
2010-07-12 22:20       ` [PATCH v5] " Lars-Peter Clausen
2010-07-12 22:45         ` Joe Perches
2010-07-12 23:45           ` Lars-Peter Clausen
2010-07-15 21:06         ` [PATCH v6] " Lars-Peter Clausen
2010-07-15 21:16           ` Andrew Morton
2010-07-15 21:37             ` Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 19/26] USB: Add JZ4740 ohci support Lars-Peter Clausen
2010-06-19 17:17   ` Greg KH
2010-06-19  5:08 ` [PATCH v2 20/26] alsa: ASoC: Add JZ4740 codec driver Lars-Peter Clausen
2010-06-19 14:49   ` [PATCH v3] " Lars-Peter Clausen
2010-06-20 13:11     ` Mark Brown
2010-06-21 22:46     ` [PATCH v4] " Lars-Peter Clausen
2010-06-22 10:12       ` Liam Girdwood
2010-06-22 23:12       ` Mark Brown
2010-06-19  5:08 ` [PATCH v2 21/26] alsa: ASoC: Add JZ4740 ASoC support Lars-Peter Clausen
2010-06-19 14:50   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 22/26] MFD: Add JZ4740 ADC driver Lars-Peter Clausen
2010-07-04 22:47   ` Lars-Peter Clausen
2010-07-05 14:53   ` Samuel Ortiz
2010-07-05 15:43     ` Lars-Peter Clausen
2010-07-05 15:53       ` Samuel Ortiz
2010-07-12  1:48   ` [PATCH v3] " Lars-Peter Clausen
2010-07-14  9:19     ` Samuel Ortiz
2010-06-19  5:08 ` [PATCH v2 23/26] hwmon: " Lars-Peter Clausen
2010-06-19  8:36   ` [lm-sensors] " Jean Delvare
2010-06-19 12:58     ` Lars-Peter Clausen
2010-06-19 14:47   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19 16:24     ` [lm-sensors] " Jean Delvare
2010-06-19 17:59       ` Lars-Peter Clausen
2010-06-19 19:32     ` [PATCH v4] " Lars-Peter Clausen
2010-06-20  6:32       ` [lm-sensors] " Jean Delvare
2010-06-19  5:08 ` [PATCH v2 24/26] power: Add JZ4740 battery driver Lars-Peter Clausen
2010-06-27  1:58   ` Lars-Peter Clausen
2010-06-28 11:43     ` Anton Vorontsov
2010-06-19  5:08 ` [PATCH v2 25/26] MIPS: JZ4740: Add qi_lb60 board support Lars-Peter Clausen
2010-07-17 12:16   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 26/26] alsa: ASoC: JZ4740: Add qi_lb60 board driver Lars-Peter Clausen
2010-06-19 14:52   ` [PATCH v3] " Lars-Peter Clausen
2010-06-20  9:26 ` [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip Thomas Bogendoerfer
2010-06-20 14:31   ` Lars-Peter Clausen
2010-06-20 16:34     ` Thomas Bogendoerfer
2010-06-20 16:49       ` Lars-Peter Clausen
2010-06-20 17:01         ` Thomas Bogendoerfer
2010-06-20 17:57           ` Florian Fainelli
2010-06-20 18:30             ` Lars-Peter Clausen
2010-06-21  2:56   ` Xiangfu Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1276924111-11158-7-git-send-email-lars@metafoo.de \
    --to=lars@metafoo.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).