From: Kulikov Vasiliy <segooon@gmail.com>
To: trivial@kernel.org
Cc: Kernel Janitors <kernel-janitors@vger.kernel.org>,
Greg Kroah-Hartman <gregkh@suse.de>, Pavel Machek <pavel@ucw.cz>,
Pekka Enberg <penberg@cs.helsinki.fi>,
Kulikov Vasiliy <segooon@gmail.com>,
Lars Lindley <lindley@coyote.org>,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH 14/16] trivial: use ARRAY_SIZE
Date: Mon, 28 Jun 2010 15:55:37 +0400 [thread overview]
Message-ID: <1277726138-24865-1-git-send-email-segooon@gmail.com> (raw)
Change sizeof(x) / sizeof(*x) to ARRAY_SIZE(x).
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
---
drivers/staging/winbond/reg.c | 36 ++++++++++++++++++------------------
1 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index d9a8128..990f9d4 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -966,42 +966,42 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
switch (pHwData->phy_type) {
case RF_MAXIM_2825:
case RF_MAXIM_V1: /* 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331) */
- number = sizeof(max2825_rf_data) / sizeof(max2825_rf_data[0]);
+ number = ARRAY_SIZE(max2825_rf_data);
for (i = 0; i < number; i++) {
pHwData->phy_para[i] = max2825_rf_data[i]; /* Backup Rf parameter */
pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_rf_data[i], 18);
}
break;
case RF_MAXIM_2827:
- number = sizeof(max2827_rf_data) / sizeof(max2827_rf_data[0]);
+ number = ARRAY_SIZE(max2827_rf_data);
for (i = 0; i < number; i++) {
pHwData->phy_para[i] = max2827_rf_data[i];
pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_rf_data[i], 18);
}
break;
case RF_MAXIM_2828:
- number = sizeof(max2828_rf_data) / sizeof(max2828_rf_data[0]);
+ number = ARRAY_SIZE(max2828_rf_data);
for (i = 0; i < number; i++) {
pHwData->phy_para[i] = max2828_rf_data[i];
pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_rf_data[i], 18);
}
break;
case RF_MAXIM_2829:
- number = sizeof(max2829_rf_data) / sizeof(max2829_rf_data[0]);
+ number = ARRAY_SIZE(max2829_rf_data);
for (i = 0; i < number; i++) {
pHwData->phy_para[i] = max2829_rf_data[i];
pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_rf_data[i], 18);
}
break;
case RF_AIROHA_2230:
- number = sizeof(al2230_rf_data) / sizeof(al2230_rf_data[0]);
+ number = ARRAY_SIZE(al2230_rf_data);
for (i = 0; i < number; i++) {
pHwData->phy_para[i] = al2230_rf_data[i];
pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_rf_data[i], 20);
}
break;
case RF_AIROHA_2230S:
- number = sizeof(al2230s_rf_data) / sizeof(al2230s_rf_data[0]);
+ number = ARRAY_SIZE(al2230s_rf_data);
for (i = 0; i < number; i++) {
pHwData->phy_para[i] = al2230s_rf_data[i];
pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230s_rf_data[i], 20);
@@ -1013,12 +1013,12 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
#ifdef _PE_STATE_DUMP_
printk("* PLL_ON low\n");
#endif
- number = sizeof(al7230_rf_data_24) / sizeof(al7230_rf_data_24[0]);
+ number = ARRAY_SIZE(al7230_rf_data_24);
Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
break;
case RF_WB_242:
case RF_WB_242_1:
- number = sizeof(w89rf242_rf_data) / sizeof(w89rf242_rf_data[0]);
+ number = ARRAY_SIZE(w89rf242_rf_data);
for (i = 0; i < number; i++) {
ltmp = w89rf242_rf_data[i];
if (i == 4) { /* Update the VCO trim from EEPROM */
@@ -1119,7 +1119,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
printk("* PLL_ON low\n");
#endif
- number = sizeof(al7230_rf_data_50) / sizeof(al7230_rf_data_50[0]);
+ number = ARRAY_SIZE(al7230_rf_data_50);
Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
/* Write to register. number must less and equal than 16 */
for (i = 0; i < number; i++)
@@ -1747,7 +1747,7 @@ void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData, struct chan_info C
pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_channel_data_24[Channel.ChanNo-1][i], 18);
Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
} else if (Channel.band == BAND_TYPE_OFDM_5) {
- count = sizeof(max2829_channel_data_50) / sizeof(max2829_channel_data_50[0]);
+ count = ARRAY_SIZE(max2829_channel_data_50);
for (i = 0; i < count; i++) {
if (max2829_channel_data_50[i][0] == Channel.ChanNo) {
@@ -1783,13 +1783,13 @@ void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData, struct chan_info C
/* Update BB register */
BBProcessor_AL7230_2400(pHwData);
- number = sizeof(al7230_rf_data_24) / sizeof(al7230_rf_data_24[0]);
+ number = ARRAY_SIZE(al7230_rf_data_24);
Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
} else {
/* Update BB register */
BBProcessor_AL7230_5000(pHwData);
- number = sizeof(al7230_rf_data_50) / sizeof(al7230_rf_data_50[0]);
+ number = ARRAY_SIZE(al7230_rf_data_50);
Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
}
@@ -1814,7 +1814,7 @@ void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData, struct chan_info C
Wb35Reg_Write(pHwData, 0x0864, ltmp);
}
- count = sizeof(al7230_channel_data_5) / sizeof(al7230_channel_data_5[0]);
+ count = ARRAY_SIZE(al7230_channel_data_5);
for (i = 0; i < count; i++) {
if (al7230_channel_data_5[i][0] == Channel.ChanNo) {
@@ -1978,7 +1978,7 @@ u8 RFSynthesizer_SetAiroha2230Power(struct hw_data *pHwData, u8 index)
u32 PowerData;
u8 i, count;
- count = sizeof(al2230_txvga_data) / sizeof(al2230_txvga_data[0]);
+ count = ARRAY_SIZE(al2230_txvga_data);
for (i = 0; i < count; i++) {
if (al2230_txvga_data[i][1] >= index)
break;
@@ -1996,7 +1996,7 @@ u8 RFSynthesizer_SetAiroha7230Power(struct hw_data *pHwData, u8 index)
u32 PowerData;
u8 i, count;
- count = sizeof(al7230_txvga_data) / sizeof(al7230_txvga_data[0]);
+ count = ARRAY_SIZE(al7230_txvga_data);
for (i = 0; i < count; i++) {
if (al7230_txvga_data[i][1] >= index)
break;
@@ -2013,7 +2013,7 @@ u8 RFSynthesizer_SetWinbond242Power(struct hw_data *pHwData, u8 index)
u32 PowerData;
u8 i, count;
- count = sizeof(w89rf242_txvga_data) / sizeof(w89rf242_txvga_data[0]);
+ count = ARRAY_SIZE(w89rf242_txvga_data);
for (i = 0; i < count; i++) {
if (w89rf242_txvga_data[i][1] >= index)
break;
@@ -2184,14 +2184,14 @@ void GetTxVgaFromEEPROM(struct hw_data *pHwData)
/* Adjust WB_242 to WB_242_1 TxVga scale */
if (pHwData->phy_type == RF_WB_242) {
for (i = 0; i < 4; i++) { /* Only 2412 2437 2462 2484 case must be modified */
- for (j = 0; j < (sizeof(w89rf242_txvga_old_mapping) / sizeof(w89rf242_txvga_old_mapping[0])); j++) {
+ for (j = 0; j < ARRAY_SIZE(w89rf242_txvga_old_mapping); j++) {
if (pctmp[i] < (u8) w89rf242_txvga_old_mapping[j][1]) {
pctmp[i] = (u8) w89rf242_txvga_old_mapping[j][0];
break;
}
}
- if (j == (sizeof(w89rf242_txvga_old_mapping) / sizeof(w89rf242_txvga_old_mapping[0])))
+ if (j == ARRAY_SIZE(w89rf242_txvga_old_mapping))
pctmp[i] = (u8)w89rf242_txvga_old_mapping[j-1][0];
}
}
--
1.7.0.4
next reply other threads:[~2010-06-28 11:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-28 11:55 Kulikov Vasiliy [this message]
2010-06-28 12:36 ` [PATCH 14/16] trivial: use ARRAY_SIZE Pekka Enberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1277726138-24865-1-git-send-email-segooon@gmail.com \
--to=segooon@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@suse.de \
--cc=kernel-janitors@vger.kernel.org \
--cc=lindley@coyote.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=penberg@cs.helsinki.fi \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox