linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lars-Peter Clausen <lars@metafoo.de>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
	Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH v3] MIPS: JZ4740: Add platform devices
Date: Sat, 17 Jul 2010 14:13:29 +0200	[thread overview]
Message-ID: <1279368809-21006-1-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1276924111-11158-14-git-send-email-lars@metafoo.de>

This patch adds platform devices for all the JZ4740 platform drivers.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

---
Changes since v1
- Add JZ4740 PCM device
- Add ADC MFD device and remove battery device

Changes since v2
- Add memory region for NAND bank
---
 arch/mips/include/asm/mach-jz4740/platform.h |   36 ++++
 arch/mips/jz4740/platform.c                  |  291 ++++++++++++++++++++++++++
 2 files changed, 327 insertions(+), 0 deletions(-)
 create mode 100644 arch/mips/include/asm/mach-jz4740/platform.h
 create mode 100644 arch/mips/jz4740/platform.c

diff --git a/arch/mips/include/asm/mach-jz4740/platform.h b/arch/mips/include/asm/mach-jz4740/platform.h
new file mode 100644
index 0000000..8987a76
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/platform.h
@@ -0,0 +1,36 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 platform device definitions
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+
+#ifndef __JZ4740_PLATFORM_H
+#define __JZ4740_PLATFORM_H
+
+#include <linux/platform_device.h>
+
+extern struct platform_device jz4740_usb_ohci_device;
+extern struct platform_device jz4740_udc_device;
+extern struct platform_device jz4740_mmc_device;
+extern struct platform_device jz4740_rtc_device;
+extern struct platform_device jz4740_i2c_device;
+extern struct platform_device jz4740_nand_device;
+extern struct platform_device jz4740_framebuffer_device;
+extern struct platform_device jz4740_i2s_device;
+extern struct platform_device jz4740_pcm_device;
+extern struct platform_device jz4740_codec_device;
+extern struct platform_device jz4740_adc_device;
+
+void jz4740_serial_device_register(void);
+
+#endif
diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c
new file mode 100644
index 0000000..95bc2b5
--- /dev/null
+++ b/arch/mips/jz4740/platform.c
@@ -0,0 +1,291 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 platform devices
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+
+#include <linux/dma-mapping.h>
+
+#include <asm/mach-jz4740/platform.h>
+#include <asm/mach-jz4740/base.h>
+#include <asm/mach-jz4740/irq.h>
+
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+
+#include "serial.h"
+#include "clock.h"
+
+/* OHCI controller */
+static struct resource jz4740_usb_ohci_resources[] = {
+	{
+		.start	= JZ4740_UHC_BASE_ADDR,
+		.end	= JZ4740_UHC_BASE_ADDR + 0x1000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= JZ4740_IRQ_UHC,
+		.end	= JZ4740_IRQ_UHC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device jz4740_usb_ohci_device = {
+	.name		= "jz4740-ohci",
+	.id		= -1,
+	.dev = {
+		.dma_mask = &jz4740_usb_ohci_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(jz4740_usb_ohci_resources),
+	.resource	= jz4740_usb_ohci_resources,
+};
+
+/* UDC (USB gadget controller) */
+static struct resource jz4740_usb_gdt_resources[] = {
+	{
+		.start	= JZ4740_UDC_BASE_ADDR,
+		.end	= JZ4740_UDC_BASE_ADDR + 0x1000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= JZ4740_IRQ_UDC,
+		.end	= JZ4740_IRQ_UDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device jz4740_udc_device = {
+	.name		= "jz-udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask = &jz4740_udc_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(jz4740_usb_gdt_resources),
+	.resource	= jz4740_usb_gdt_resources,
+};
+
+/* MMC/SD controller */
+static struct resource jz4740_mmc_resources[] = {
+	{
+		.start	= JZ4740_MSC_BASE_ADDR,
+		.end	= JZ4740_MSC_BASE_ADDR + 0x1000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= JZ4740_IRQ_MSC,
+		.end	= JZ4740_IRQ_MSC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device jz4740_mmc_device = {
+	.name		= "jz4740-mmc",
+	.id		= 0,
+	.dev = {
+		.dma_mask = &jz4740_mmc_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources  = ARRAY_SIZE(jz4740_mmc_resources),
+	.resource	= jz4740_mmc_resources,
+};
+
+/* RTC controller */
+static struct resource jz4740_rtc_resources[] = {
+	{
+		.start	= JZ4740_RTC_BASE_ADDR,
+		.end	= JZ4740_RTC_BASE_ADDR + 0x38 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start  = JZ4740_IRQ_RTC,
+		.end	= JZ4740_IRQ_RTC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device jz4740_rtc_device = {
+	.name		= "jz4740-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(jz4740_rtc_resources),
+	.resource	= jz4740_rtc_resources,
+};
+
+/* I2C controller */
+static struct resource jz4740_i2c_resources[] = {
+	{
+		.start	= JZ4740_I2C_BASE_ADDR,
+		.end	= JZ4740_I2C_BASE_ADDR + 0x1000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= JZ4740_IRQ_I2C,
+		.end	= JZ4740_IRQ_I2C,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device jz4740_i2c_device = {
+	.name		= "jz4740-i2c",
+	.id		= 0,
+	.num_resources  = ARRAY_SIZE(jz4740_i2c_resources),
+	.resource	= jz4740_i2c_resources,
+};
+
+/* NAND controller */
+static struct resource jz4740_nand_resources[] = {
+	{
+		.name	= "mmio",
+		.start	= JZ4740_EMC_BASE_ADDR,
+		.end	= JZ4740_EMC_BASE_ADDR + 0x1000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "bank",
+		.start	= 0x18000000,
+		.end	= 0x180C0000 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device jz4740_nand_device = {
+	.name = "jz4740-nand",
+	.num_resources = ARRAY_SIZE(jz4740_nand_resources),
+	.resource = jz4740_nand_resources,
+};
+
+/* LCD controller */
+static struct resource jz4740_framebuffer_resources[] = {
+	{
+		.start	= JZ4740_LCD_BASE_ADDR,
+		.end	= JZ4740_LCD_BASE_ADDR + 0x1000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device jz4740_framebuffer_device = {
+	.name		= "jz4740-fb",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(jz4740_framebuffer_resources),
+	.resource	= jz4740_framebuffer_resources,
+	.dev = {
+		.dma_mask = &jz4740_framebuffer_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+/* I2S controller */
+static struct resource jz4740_i2s_resources[] = {
+	{
+		.start	= JZ4740_AIC_BASE_ADDR,
+		.end	= JZ4740_AIC_BASE_ADDR + 0x38 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device jz4740_i2s_device = {
+	.name		= "jz4740-i2s",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(jz4740_i2s_resources),
+	.resource	= jz4740_i2s_resources,
+};
+
+/* PCM */
+struct platform_device jz4740_pcm_device = {
+	.name		= "jz4740-pcm",
+	.id		= -1,
+};
+
+/* Codec */
+static struct resource jz4740_codec_resources[] = {
+	{
+		.start	= JZ4740_AIC_BASE_ADDR + 0x80,
+		.end	= JZ4740_AIC_BASE_ADDR + 0x88 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device jz4740_codec_device = {
+	.name		= "jz4740-codec",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(jz4740_codec_resources),
+	.resource	= jz4740_codec_resources,
+};
+
+/* ADC controller */
+static struct resource jz4740_adc_resources[] = {
+	{
+		.start	= JZ4740_SADC_BASE_ADDR,
+		.end	= JZ4740_SADC_BASE_ADDR + 0x30,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= JZ4740_IRQ_SADC,
+		.end	= JZ4740_IRQ_SADC,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= JZ4740_IRQ_ADC_BASE,
+		.end	= JZ4740_IRQ_ADC_BASE,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device jz4740_adc_device = {
+	.name		= "jz4740-adc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(jz4740_adc_resources),
+	.resource	= jz4740_adc_resources,
+};
+
+/* Serial */
+#define JZ4740_UART_DATA(_id) \
+	{ \
+		.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE, \
+		.iotype = UPIO_MEM, \
+		.regshift = 2, \
+		.serial_out = jz4740_serial_out, \
+		.type = PORT_16550, \
+		.mapbase = JZ4740_UART ## _id ## _BASE_ADDR, \
+		.irq = JZ4740_IRQ_UART ## _id, \
+	}
+
+static struct plat_serial8250_port jz4740_uart_data[] = {
+	JZ4740_UART_DATA(0),
+	JZ4740_UART_DATA(1),
+	{},
+};
+
+static struct platform_device jz4740_uart_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = jz4740_uart_data,
+	},
+};
+
+void jz4740_serial_device_register(void)
+{
+	struct plat_serial8250_port *p;
+
+	for (p = jz4740_uart_data; p->flags != 0; ++p)
+		p->uartclk = jz4740_clock_bdata.ext_rate;
+
+	platform_device_register(&jz4740_uart_device);
+}
-- 
1.5.6.5


  reply	other threads:[~2010-07-17 12:13 UTC|newest]

Thread overview: 111+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-19  5:08 [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 01/26] MIPS: Add base support for " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 02/26] MIPS: jz4740: Add IRQ handler code Lars-Peter Clausen
2010-07-17 12:08   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 03/26] MIPS: JZ4740: Add clock API support Lars-Peter Clausen
2010-06-28  1:24   ` [PATCH v3 " Lars-Peter Clausen
2010-07-17 12:10     ` [PATCH v4] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 04/26] MIPS: JZ4740: Add timer support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 05/26] MIPS: JZ4740: Add clocksource/clockevent support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 06/26] MIPS: JZ4740: Add power-management and system reset support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 07/26] MIPS: JZ4740: Add setup code Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 08/26] MIPS: JZ4740: Add gpio support Lars-Peter Clausen
2010-07-17 12:11   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 09/26] MIPS: JZ4740: Add DMA support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 10/26] MIPS: JZ4740: Add PWM support Lars-Peter Clausen
2010-06-28  1:23   ` [PATCH v3 " Lars-Peter Clausen
2010-07-17 12:12     ` [PATCH v4] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 11/26] MIPS: JZ4740: Add serial support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 12/26] MIPS: JZ4740: Add prom support Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 13/26] MIPS: JZ4740: Add platform devices Lars-Peter Clausen
2010-07-17 12:13   ` Lars-Peter Clausen [this message]
2010-06-19  5:08 ` [PATCH v2 14/26] MIPS: JZ4740: Add Kbuild files Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 15/26] RTC: Add JZ4740 RTC driver Lars-Peter Clausen
2010-06-19 10:43   ` Marek Vasut
2010-06-19 13:05     ` Lars-Peter Clausen
2010-06-19 13:37       ` Wan ZongShun
2010-06-19 13:53         ` Lars-Peter Clausen
2010-06-19 14:36           ` Wan ZongShun
2010-06-19 14:04       ` Marek Vasut
2010-06-19 17:42         ` Lars-Peter Clausen
2010-06-19 17:53           ` Geert Uytterhoeven
2010-06-19 19:29   ` [PATCH v3] " Lars-Peter Clausen
2010-06-20  1:13     ` [rtc-linux] " Wan ZongShun
2010-06-20  1:23       ` Lars-Peter Clausen
2010-06-20  1:30         ` Wan ZongShun
2010-06-22  5:53     ` Alessandro Zummo
2010-06-19  5:08 ` [PATCH v2 16/26] fbdev: Add JZ4740 framebuffer driver Lars-Peter Clausen
2010-07-04 22:27   ` Lars-Peter Clausen
2010-07-07 23:41     ` Andrew Morton
2010-07-08 13:28       ` Lars-Peter Clausen
2010-07-08 16:46         ` Andrew Morton
2010-07-09  1:26     ` Jaya Kumar
2010-07-09 15:31       ` Lars-Peter Clausen
2010-07-17 12:14   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND driver Lars-Peter Clausen
2010-07-04 22:35   ` [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND Lars-Peter Clausen
2010-07-08  6:06   ` [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND driver Artem Bityutskiy
2010-07-08 13:20     ` Lars-Peter Clausen
2010-07-08 13:19       ` Artem Bityutskiy
2010-07-08 14:02         ` Lars-Peter Clausen
2010-07-08 14:14           ` Artem Bityutskiy
2010-07-17 12:15   ` [PATCH v3] " Lars-Peter Clausen
2010-07-18 16:54     ` Artem Bityutskiy
2010-07-18 17:02       ` Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 18/26] MMC: Add JZ4740 mmc driver Lars-Peter Clausen
2010-06-19 14:46   ` Matt Fleming
2010-06-19 15:29     ` Lars-Peter Clausen
2010-06-28  1:20   ` [PATCH v3] " Lars-Peter Clausen
2010-06-29 20:17     ` Matt Fleming
2010-07-01 15:47       ` Lars-Peter Clausen
2010-06-30 20:55     ` Andrew Morton
2010-07-01 15:45       ` Lars-Peter Clausen
2010-07-12 21:33     ` [PATCH v4] " Lars-Peter Clausen
2010-07-12 21:41       ` Randy Dunlap
2010-07-12 22:07         ` Lars-Peter Clausen
2010-07-12 22:20       ` [PATCH v5] " Lars-Peter Clausen
2010-07-12 22:45         ` Joe Perches
2010-07-12 23:45           ` Lars-Peter Clausen
2010-07-15 21:06         ` [PATCH v6] " Lars-Peter Clausen
2010-07-15 21:16           ` Andrew Morton
2010-07-15 21:37             ` Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 19/26] USB: Add JZ4740 ohci support Lars-Peter Clausen
2010-06-19 17:17   ` Greg KH
2010-06-19  5:08 ` [PATCH v2 20/26] alsa: ASoC: Add JZ4740 codec driver Lars-Peter Clausen
2010-06-19 14:49   ` [PATCH v3] " Lars-Peter Clausen
2010-06-20 13:11     ` Mark Brown
2010-06-21 22:46     ` [PATCH v4] " Lars-Peter Clausen
2010-06-22 10:12       ` Liam Girdwood
2010-06-22 23:12       ` Mark Brown
2010-06-19  5:08 ` [PATCH v2 21/26] alsa: ASoC: Add JZ4740 ASoC support Lars-Peter Clausen
2010-06-19 14:50   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 22/26] MFD: Add JZ4740 ADC driver Lars-Peter Clausen
2010-07-04 22:47   ` Lars-Peter Clausen
2010-07-05 14:53   ` Samuel Ortiz
2010-07-05 15:43     ` Lars-Peter Clausen
2010-07-05 15:53       ` Samuel Ortiz
2010-07-12  1:48   ` [PATCH v3] " Lars-Peter Clausen
2010-07-14  9:19     ` Samuel Ortiz
2010-06-19  5:08 ` [PATCH v2 23/26] hwmon: " Lars-Peter Clausen
2010-06-19  8:36   ` [lm-sensors] " Jean Delvare
2010-06-19 12:58     ` Lars-Peter Clausen
2010-06-19 14:47   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19 16:24     ` [lm-sensors] " Jean Delvare
2010-06-19 17:59       ` Lars-Peter Clausen
2010-06-19 19:32     ` [PATCH v4] " Lars-Peter Clausen
2010-06-20  6:32       ` [lm-sensors] " Jean Delvare
2010-06-19  5:08 ` [PATCH v2 24/26] power: Add JZ4740 battery driver Lars-Peter Clausen
2010-06-27  1:58   ` Lars-Peter Clausen
2010-06-28 11:43     ` Anton Vorontsov
2010-06-19  5:08 ` [PATCH v2 25/26] MIPS: JZ4740: Add qi_lb60 board support Lars-Peter Clausen
2010-07-17 12:16   ` [PATCH v3] " Lars-Peter Clausen
2010-06-19  5:08 ` [PATCH v2 26/26] alsa: ASoC: JZ4740: Add qi_lb60 board driver Lars-Peter Clausen
2010-06-19 14:52   ` [PATCH v3] " Lars-Peter Clausen
2010-06-20  9:26 ` [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip Thomas Bogendoerfer
2010-06-20 14:31   ` Lars-Peter Clausen
2010-06-20 16:34     ` Thomas Bogendoerfer
2010-06-20 16:49       ` Lars-Peter Clausen
2010-06-20 17:01         ` Thomas Bogendoerfer
2010-06-20 17:57           ` Florian Fainelli
2010-06-20 18:30             ` Lars-Peter Clausen
2010-06-21  2:56   ` Xiangfu Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1279368809-21006-1-git-send-email-lars@metafoo.de \
    --to=lars@metafoo.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).