Re: Linux 4.8-rc1 Cirrus QEMU crashes on boot.

[David Airlie <airlied@redhat.com>]

----- Original Message -----
> From: "Linus Torvalds" <torvalds@linux-foundation.org>
> To: "Eric W. Biederman" <ebiederm@xmission.com>, "Boris Brezillon" <boris.brezillon@free-electrons.com>, "Daniel
> Vetter" <daniel.vetter@ffwll.ch>
> Cc: "Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>, "Dave Airlie" <airlied@redhat.com>, "David Airlie"
> <airlied@linux.ie>, "DRI" <dri-devel@lists.freedesktop.org>
> Sent: Tuesday, 9 August, 2016 7:19:23 AM
> Subject: Re: Linux 4.8-rc1 Cirrus QEMU crashes on boot.
> 
> On Mon, Aug 8, 2016 at 1:24 PM, Eric W. Biederman <ebiederm@xmission.com>
> wrote:
> >
> > Booting up v4.8-rc1 in qemu today I ran I ran into this beautiful oops.
> >
> > I am just about to head out the door on vacation until the end of the
> > month so hopefully I am tossing out enough information to the right
> > people.
> >
> > I have confirmed that disabling CONFIG_DRM_CIRRUS_QEMU avoids this
> > crash.
> >
> > [    0.720167] BUG: unable to handle kernel NULL pointer dereference at
> > 0000000000000018
> > [    0.721348] IP: [<ffffffff8d5ef9ac>] drm_pick_crtcs+0xfc/0x270
> > [    0.722249] PGD 0
> > [    0.722659] Oops: 0000 [#1] SMP
> > [    0.723141] Modules linked in:
> > [    0.723643] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc1+ #116
> > [    0.724602] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
> > [    0.725450] task: ffff8800bbf28000 task.stack: ffff8800bbf30000
> > [    0.726327] RIP: 0010:[<ffffffff8d5ef9ac>]  [<ffffffff8d5ef9ac>]
> > drm_pick_crtcs+0xfc/0x270
> > [    0.727648] RSP: 0000:ffff8800bbf33978  EFLAGS: 00010217
> > [    0.728444] RAX: ffffffff8d623a20 RBX: 0000000000000000 RCX:
> > ffff8800baf3f860
> > [    0.729498] RDX: 0000000000000000 RSI: 0000000000001000 RDI:
> > ffff8800baf3f800
> > [    0.730626] RBP: ffff8800bbf339f8 R08: 0000000000000000 R09:
> > 0000000000000001
> > [    0.731704] R10: 0000000000000001 R11: 0000000000000000 R12:
> > ffff8800bbaf3af0
> > [    0.732827] R13: ffff8800bbaf3af8 R14: 0000000000000000 R15:
> > ffff8800baf3fc00
> > [    0.733863] FS:  0000000000000000(0000) GS:ffff8800bf800000(0000)
> > knlGS:0000000000000000
> > [    0.735106] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [    0.735964] CR2: 0000000000000018 CR3: 000000003b219000 CR4:
> > 00000000000006f0
> > [    0.737021] Stack:
> > [    0.737342]  ffff8800bbf33998 0000000000000246 ffff8800bbaf3b18
> > ffff8800bbaf3b00
> > [    0.738602]  0000100000000001 0000000000000000 ffff8800bbaf3b00
> > ffff8800baf3f800
> > [    0.739807]  0000000300001000 ffff8800bbaf3b18 ffff8800bbf339e8
> > ffff8800baf3fc00
> > [    0.740993] Call Trace:
> > [    0.741393]  [<ffffffff8d5efedd>] drm_setup_crtcs+0x3bd/0xb50
> > [    0.742252]  [<ffffffff8d0edaa1>] ? mark_held_locks+0x71/0x90
> > [    0.743176]  [<ffffffff8db0db6b>] ? __mutex_unlock_slowpath+0xeb/0x1c0
> > [    0.744138]  [<ffffffff8d5f08c1>]
> > drm_fb_helper_initial_config+0x81/0x3c0
> > [    0.745166]  [<ffffffff8d6110b4>] ? drm_modeset_unlock_all+0x54/0x80
> > [    0.746136]  [<ffffffff8d624fe0>] cirrus_fbdev_init+0xa0/0xb0
> > [    0.747033]  [<ffffffff8d6245fb>] cirrus_modeset_init+0x18b/0x1e0
> > .. snip snip ..
> > [    0.771023] Code: e8 ba e1 ff ff 48 8b 55 b8 48 83 f8 01 83 5d c4 ff 48
> > 8b 7d b8 48 8b 82 98 02 00 00 49 8b 57 08 48 8b 40 10 48 8b 92 00 0a 00 00
> > <48> 83 7a 18 00 74 09 48 85 c0 0f 84 53 01 00 00 ff d0 49 89 c3
> 
> This decodes to
> 
>    0: e8 ba e1 ff ff       callq  ...
>    5: 48 8b 55 b8           mov    -0x48(%rbp),%rdx
>    9: 48 83 f8 01           cmp    $0x1,%rax
>    d: 83 5d c4 ff           sbbl   $0xffffffff,-0x3c(%rbp)
>   11: 48 8b 7d b8           mov    -0x48(%rbp),%rdi
>   15: 48 8b 82 98 02 00 00 mov    0x298(%rdx),%rax
>   1c: 49 8b 57 08           mov    0x8(%r15),%rdx
>   20: 48 8b 40 10           mov    0x10(%rax),%rax
>   24: 48 8b 92 00 0a 00 00 mov    0xa00(%rdx),%rdx
>   2b:* 48 83 7a 18 00       cmpq   $0x0,0x18(%rdx) <-- trapping instruction
>   30: 74 09                 je     0x3b
>   32: 48 85 c0             test   %rax,%rax
>   35: 0f 84 53 01 00 00     je     0x18e
>   3b: ff d0                 callq  *%rax
>   3d: 49 89 c3             mov    %rax,%r11
> 
> 
> and trying to find matching code I think the oops is from this:
> 
>         if (fb_helper->dev->mode_config.funcs->atomic_commit &&
>             !connector_funcs->best_encoder)
>                 encoder = drm_atomic_helper_best_encoder(connector);
>         else
>                 encoder = connector_funcs->best_encoder(connector);
> 
> in particular, the trapping instruction is the load of "atomic_commit".
> 
> (The "callq *%rax" seems to be the "connector_funcs->best_encoder()" call)
> 
> So I *think* we have "fb_helper->dev->mode_config.funcs" being NULL.
> 
> But I might have gotten the code matching wrong. I don't have the same
> compiler as Eric, so even when using his config my code generation
> doesn't really match. But there is only one indirect call in that
> function, which is that ->best_encoder() call, so it does seem to
> match up.
> 
> Adding Boris Brezillon and Daniel Vetter to the cc, since assuming I'm
> right, the main suspect is commit c61b93fe51b1 ("drm/atomic: Fix
> remaining places where !funcs->best_encoder is valid").
> 
> Boris? Daniel?

I figured this out earlier this morning on another thread,

cirrus sets the mode funcs later than other drivers, will send a fix later,
but I need to audit other drivers.

Dave.
> 
>               Linus
>