From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755477Ab0IPPoD (ORCPT ); Thu, 16 Sep 2010 11:44:03 -0400 Received: from imr3.ericy.com ([198.24.6.13]:34368 "EHLO imr3.ericy.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753629Ab0IPPoB (ORCPT ); Thu, 16 Sep 2010 11:44:01 -0400 From: Guenter Roeck To: Jean Delvare CC: Randy Dunlap , "Ira W. Snyder" , lm-sensors@lm-sensors.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, Guenter Roeck Subject: [PATCH v2 1/2] hwmon: (adm1031) Replace update_rate sysfs attribute with update_interval Date: Thu, 16 Sep 2010 08:49:57 -0700 Message-ID: <1284652197-17069-1-git-send-email-guenter.roeck@ericsson.com> X-Mailer: git-send-email 1.7.0.87.g0901d MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The attribute reflects an interval, not a rate. Signed-off-by: Guenter Roeck Acked-by: Ira W. Snyder --- v2: Modified sysfs-interface text Documentation/hwmon/sysfs-interface | 9 +++---- drivers/hwmon/adm1031.c | 43 +++++++++++++++++++--------------- 2 files changed, 28 insertions(+), 24 deletions(-) diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index ff45d1f..dcb7636 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -91,12 +91,11 @@ name The chip name. I2C devices get this attribute created automatically. RO -update_rate The rate at which the chip will update readings. - Unit: millisecond +update_interval The interval at which the chip will update readings. + Unit: milliseconds RW - Some devices have a variable update rate. This attribute - can be used to change the update rate to the desired - frequency. + Some devices have a variable update rate or interval. + This attribute can be used to change it to the desired value. ************ diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index 15c1a96..0683e6b 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -79,7 +79,7 @@ struct adm1031_data { int chip_type; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ - unsigned int update_rate; /* In milliseconds */ + unsigned int update_interval; /* In milliseconds */ /* The chan_select_table contains the possible configurations for * auto fan control. */ @@ -743,23 +743,23 @@ static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 12); static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 13); static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 14); -/* Update Rate */ -static const unsigned int update_rates[] = { +/* Update Interval */ +static const unsigned int update_intervals[] = { 16000, 8000, 4000, 2000, 1000, 500, 250, 125, }; -static ssize_t show_update_rate(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t show_update_interval(struct device *dev, + struct device_attribute *attr, char *buf) { struct i2c_client *client = to_i2c_client(dev); struct adm1031_data *data = i2c_get_clientdata(client); - return sprintf(buf, "%u\n", data->update_rate); + return sprintf(buf, "%u\n", data->update_interval); } -static ssize_t set_update_rate(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t set_update_interval(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct adm1031_data *data = i2c_get_clientdata(client); @@ -771,12 +771,15 @@ static ssize_t set_update_rate(struct device *dev, if (err) return err; - /* find the nearest update rate from the table */ - for (i = 0; i < ARRAY_SIZE(update_rates) - 1; i++) { - if (val >= update_rates[i]) + /* + * Find the nearest update interval from the table. + * Use it to determine the matching update rate. + */ + for (i = 0; i < ARRAY_SIZE(update_intervals) - 1; i++) { + if (val >= update_intervals[i]) break; } - /* if not found, we point to the last entry (lowest update rate) */ + /* if not found, we point to the last entry (lowest update interval) */ /* set the new update rate while preserving other settings */ reg = adm1031_read_value(client, ADM1031_REG_FAN_FILTER); @@ -785,14 +788,14 @@ static ssize_t set_update_rate(struct device *dev, adm1031_write_value(client, ADM1031_REG_FAN_FILTER, reg); mutex_lock(&data->update_lock); - data->update_rate = update_rates[i]; + data->update_interval = update_intervals[i]; mutex_unlock(&data->update_lock); return count; } -static DEVICE_ATTR(update_rate, S_IRUGO | S_IWUSR, show_update_rate, - set_update_rate); +static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval, + set_update_interval); static struct attribute *adm1031_attributes[] = { &sensor_dev_attr_fan1_input.dev_attr.attr, @@ -830,7 +833,7 @@ static struct attribute *adm1031_attributes[] = { &sensor_dev_attr_auto_fan1_min_pwm.dev_attr.attr, - &dev_attr_update_rate.attr, + &dev_attr_update_interval.attr, &dev_attr_alarms.attr, NULL @@ -981,7 +984,8 @@ static void adm1031_init_client(struct i2c_client *client) mask = ADM1031_UPDATE_RATE_MASK; read_val = adm1031_read_value(client, ADM1031_REG_FAN_FILTER); i = (read_val & mask) >> ADM1031_UPDATE_RATE_SHIFT; - data->update_rate = update_rates[i]; + /* Save it as update interval */ + data->update_interval = update_intervals[i]; } static struct adm1031_data *adm1031_update_device(struct device *dev) @@ -993,7 +997,8 @@ static struct adm1031_data *adm1031_update_device(struct device *dev) mutex_lock(&data->update_lock); - next_update = data->last_updated + msecs_to_jiffies(data->update_rate); + next_update = data->last_updated + + msecs_to_jiffies(data->update_interval); if (time_after(jiffies, next_update) || !data->valid) { dev_dbg(&client->dev, "Starting adm1031 update\n"); -- 1.7.0.87.g0901d