linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lars-Peter Clausen <lars@metafoo.de>
To: rklein@nvidia.com, Anton Vorontsov <cbouatmailru@gmail.com>
Cc: broonie@opensource.wolfsonmicro.com, achew@nvidia.com,
	olof@lixom.net, linux-kernel@vger.kernel.org,
	Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH] POWER: Add gpio chager driver
Date: Thu, 21 Oct 2010 14:25:57 +0200	[thread overview]
Message-ID: <1287663957-30099-1-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <4CC02FF9.3050804@metafoo.de>

This patch adds a simple driver for chargers indicating their online status
through a GPIO pin.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
 drivers/power/Kconfig              |   10 ++
 drivers/power/Makefile             |    1 +
 drivers/power/gpio-charger.c       |  184 ++++++++++++++++++++++++++++++++++++
 include/linux/power/gpio-charger.h |   39 ++++++++
 4 files changed, 234 insertions(+), 0 deletions(-)
 create mode 100644 drivers/power/gpio-charger.c
 create mode 100644 include/linux/power/gpio-charger.h

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 0734356..90b1940 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -166,4 +166,14 @@ config BATTERY_INTEL_MID
 	  Say Y here to enable the battery driver on Intel MID
 	  platforms.
 
+config CHARGER_GPIO
+	tristate "GPIO charger"
+	depends on GPIOLIB
+	help
+	  Say Y to include support for chargers which report their online status
+	  through a GPIO pin.
+
+	  This driver can be build as a module. If so, the module will be
+	  called gpio-chager.
+
 endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 10143aa..2ca71ac 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -37,3 +37,4 @@ obj-$(CONFIG_BATTERY_S3C_ADC)	+= s3c_adc_battery.o
 obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
 obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
 obj-$(CONFIG_BATTERY_INTEL_MID)	+= intel_mid_battery.o
+obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
diff --git a/drivers/power/gpio-charger.c b/drivers/power/gpio-charger.c
new file mode 100644
index 0000000..0a2ddfc
--- /dev/null
+++ b/drivers/power/gpio-charger.c
@@ -0,0 +1,184 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  Driver for chargers which report their online status through a GPIO pin
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#include <linux/power/gpio-charger.h>
+
+struct gpio_charger {
+	const struct gpio_charger_platform_data *pdata;
+	int irq;
+
+	struct power_supply charger;
+};
+
+static irqreturn_t gpio_charger_irq(int irq, void *devid)
+{
+	struct power_supply *charger = devid;
+	power_supply_changed(charger);
+
+	return IRQ_HANDLED;
+}
+
+static inline struct gpio_charger *psy_to_gpio_charger(struct power_supply *psy)
+{
+	return container_of(psy, struct gpio_charger, charger);
+}
+
+static int gpio_charger_get_property(struct power_supply *psy,
+	enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy);
+	const struct gpio_charger_platform_data *pdata = gpio_charger->pdata;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = gpio_get_value(pdata->gpio);
+		val->intval ^= pdata->gpio_active_low;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property gpio_charger_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int __devinit gpio_charger_probe(struct platform_device *pdev)
+{
+	const struct gpio_charger_platform_data *pdata = pdev->dev.platform_data;
+	struct gpio_charger *gpio_charger;
+	struct power_supply *charger;
+	int ret;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data");
+		return -EINVAL;
+	}
+
+	if (!gpio_is_valid(pdata->gpio)) {
+		dev_err(&pdev->dev, "Invalid gpio pin\n");
+		return -EINVAL;
+	}
+
+	gpio_charger = kzalloc(sizeof(*gpio_charger), GFP_KERNEL);
+
+	charger = &gpio_charger->charger;
+
+	charger->name = pdata->name;
+	charger->type = pdata->type;
+	charger->properties = gpio_charger_properties;
+	charger->num_properties = ARRAY_SIZE(gpio_charger_properties);
+	charger->get_property  = gpio_charger_get_property;
+	charger->supplied_to = pdata->supplied_to;
+	charger->num_supplicants = pdata->num_supplicants;
+
+	ret = gpio_request(pdata->gpio, dev_name(&pdev->dev));
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request gpio pin: %d\n", ret);
+		goto err_free;
+	}
+	ret = gpio_direction_input(pdata->gpio);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to set gpio to input: %d\n", ret);
+		goto err_gpio_free;
+	}
+
+	gpio_charger->irq = gpio_to_irq(pdata->gpio);
+	if (gpio_charger->irq >= 0) {
+		ret = request_irq(gpio_charger->irq, gpio_charger_irq,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				dev_name(&pdev->dev), charger);
+		if (ret) {
+			dev_warn(&pdev->dev, "Failed to request gpio irq: %d\n", ret);
+			gpio_charger->irq = -1;
+		}
+	}
+
+	gpio_charger->pdata = pdata;
+
+	ret = power_supply_register(&pdev->dev, charger);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register power supply: %d\n", ret);
+		goto err_irq_free;
+	}
+
+	platform_set_drvdata(pdev, gpio_charger);
+
+	return 0;
+
+err_irq_free:
+	if (gpio_charger->irq >= 0)
+		free_irq(gpio_charger->irq, charger);
+err_gpio_free:
+	gpio_free(pdata->gpio);
+err_free:
+	kfree(gpio_charger);
+	return ret;
+}
+
+static int __devexit gpio_charger_remove(struct platform_device *pdev)
+{
+	struct gpio_charger *gpio_charger = platform_get_drvdata(pdev);
+	const struct gpio_charger_platform_data *pdata = gpio_charger->pdata;
+
+	power_supply_unregister(&gpio_charger->charger);
+
+	if (gpio_charger->irq >= 0)
+		free_irq(gpio_charger->irq, &gpio_charger->charger);
+	gpio_free(pdata->gpio);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(gpio_charger);
+
+	return 0;
+}
+
+static struct platform_driver  gpio_charger_driver = {
+	.probe = gpio_charger_probe,
+	.remove = __devexit_p(gpio_charger_remove),
+	.driver = {
+		.name = "gpio-charger",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init gpio_charger_init(void)
+{
+	return platform_driver_register(&gpio_charger_driver);
+}
+module_init(gpio_charger_init);
+
+static void __exit gpio_charger_exit(void)
+{
+	platform_driver_unregister(&gpio_charger_driver);
+}
+module_exit(gpio_charger_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Driver for chargers which report their online status through a GPIO");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio-charger");
diff --git a/include/linux/power/gpio-charger.h b/include/linux/power/gpio-charger.h
new file mode 100644
index 0000000..404d5e6
--- /dev/null
+++ b/include/linux/power/gpio-charger.h
@@ -0,0 +1,39 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __LINUX_POWER_GPIO_CHARGER_H__
+#define __LINUX_POWER_GPIO_CHARGER_H__
+
+/*
+ * struct gpio_charger_platform_data - platform_data for gpio_charger devices
+ * @name:		Name for the chargers power_supply device
+ * @type:		Type of the charger
+ * @gpio:		GPIO which is used to indicate the chargers status
+ * @gpio_active_low:	Should be set to 1 if the GPIO is active low otherwise 0
+ * @supplied_to:	Array of battery names to which this chargers supplies power
+ * @num_supplicants:	Number of entries in the supplied_to array
+ */
+
+struct gpio_charger_platform_data {
+	const char *name;
+	enum power_supply_type type;
+
+	int gpio;
+	int gpio_active_low;
+
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+#endif
-- 
1.5.6.5


  reply	other threads:[~2010-10-21 12:33 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-21  0:56 [PATCH v2] power: bq24617: Adding initial charger support rklein
2010-10-21 12:20 ` Lars-Peter Clausen
2010-10-21 12:25   ` Lars-Peter Clausen [this message]
2010-10-21 12:43     ` [PATCH] POWER: Add gpio chager driver Piotr Hosowicz
2010-10-21 14:53       ` Lars-Peter Clausen
2010-10-21 14:14     ` Anton Vorontsov
2010-10-21 14:52       ` Lars-Peter Clausen
2010-10-21 15:05         ` Anton Vorontsov
2010-10-21 17:22       ` Rhyland Klein
2010-10-21 15:55     ` [PATCH v2] POWER: Add gpio charger driver Lars-Peter Clausen
2010-10-21 16:00       ` Mark Brown
2010-10-21 16:16         ` Lars-Peter Clausen
2010-10-21 16:19           ` Mark Brown
2010-10-21 16:26       ` Anton Vorontsov
2010-10-21 17:47         ` Lars-Peter Clausen
2010-10-22 21:41           ` Rhyland Klein
2010-10-28 21:17           ` Rhyland Klein
2010-11-04 17:47             ` Anton Vorontsov
2010-11-11  0:53               ` Rhyland Klein
2010-11-11  1:33                 ` Lars-Peter Clausen
2010-11-11  1:46                   ` Rhyland Klein
2010-11-17  1:37                   ` Rhyland Klein
2010-11-18 14:05       ` Anton Vorontsov
2010-11-18 14:30         ` Lars-Peter Clausen
2010-11-18 14:42           ` Anton Vorontsov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1287663957-30099-1-git-send-email-lars@metafoo.de \
    --to=lars@metafoo.de \
    --cc=achew@nvidia.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=cbouatmailru@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=rklein@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).