Re: [PATCH] mxcmmc: Add the ability to bind a regulator to manage the MMC card voltage

[Alberto Panizzo <maramaopercheseimorto@gmail.com>]

On mar, 2010-11-02 at 08:39 +0100, Sascha Hauer wrote:
> On Tue, Nov 02, 2010 at 01:05:37AM +0100, Alberto Panizzo wrote:
> > This implementation is based on the pxamci.c driver and it will
> > be used to support the mx31_3ds machine.
> > 
> > Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
> 
> Looks good to me
> 
> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>

Tks Sascha, the only difference between the pxa implementations is in 
this part:

> > +static inline void mxcmci_set_power(struct mxcmci_host *host, unsigned int vdd)
> > +{
> > +#ifdef CONFIG_REGULATOR
> > +	if (host->vcc)
> > +		mmc_regulator_set_ocr(host->vcc, vdd);
> > +#endif
> > +	if (host->pdata && host->pdata->setpower)
> > +		host->pdata->setpower(mmc_dev(host->mmc), vdd);
> > +}
> > +

The original one have this test:
	if (!host->vcc && host->pdata && host->pdata->setpower)
		host->pdata->setpower(mmc_dev(host->mmc), vdd);

But removing it, we are able to add further action than only powering
with the right voltage the mmc card.
In the case of the mx31_3ds we are able to enable the external hardware 
buffer only when it is really needed.

-- 
Alberto!

        Be Persistent!
                - Greg Kroah-Hartman (FOSDEM 2010)