From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@linux.intel.com>
Cc: linux-kernel@vger.kernel.org,
patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 6/7] mfd: Convert WM8994 to new irq_ interrupt methods
Date: Wed, 24 Nov 2010 18:01:44 +0000 [thread overview]
Message-ID: <1290621705-6926-6-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <20101124180055.GO24970@rakim.wolfsonmicro.main>
Kernel 2.6.37 adds new interrupt methods which take a struct irq_data
rather than an irq number. Convert over to these as they will become
mandatory in future.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm8994-irq.c | 32 +++++++++++++++++---------------
1 files changed, 17 insertions(+), 15 deletions(-)
diff --git a/drivers/mfd/wm8994-irq.c b/drivers/mfd/wm8994-irq.c
index 8400eb1..6259884 100644
--- a/drivers/mfd/wm8994-irq.c
+++ b/drivers/mfd/wm8994-irq.c
@@ -156,16 +156,16 @@ static inline struct wm8994_irq_data *irq_to_wm8994_irq(struct wm8994 *wm8994,
return &wm8994_irqs[irq - wm8994->irq_base];
}
-static void wm8994_irq_lock(unsigned int irq)
+static void wm8994_irq_lock(struct irq_data *data)
{
- struct wm8994 *wm8994 = get_irq_chip_data(irq);
+ struct wm8994 *wm8994 = data->chip_data;
mutex_lock(&wm8994->irq_lock);
}
-static void wm8994_irq_sync_unlock(unsigned int irq)
+static void wm8994_irq_sync_unlock(struct irq_data *data)
{
- struct wm8994 *wm8994 = get_irq_chip_data(irq);
+ struct wm8994 *wm8994 = data->chip_data;
int i;
for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) {
@@ -182,28 +182,30 @@ static void wm8994_irq_sync_unlock(unsigned int irq)
mutex_unlock(&wm8994->irq_lock);
}
-static void wm8994_irq_unmask(unsigned int irq)
+static void wm8994_irq_unmask(struct irq_data *data)
{
- struct wm8994 *wm8994 = get_irq_chip_data(irq);
- struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994, irq);
+ struct wm8994 *wm8994 = data->chip_data;
+ struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994,
+ data->irq);
wm8994->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask;
}
-static void wm8994_irq_mask(unsigned int irq)
+static void wm8994_irq_mask(struct irq_data *data)
{
- struct wm8994 *wm8994 = get_irq_chip_data(irq);
- struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994, irq);
+ struct wm8994 *wm8994 = data->chip_data;
+ struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994,
+ data->irq);
wm8994->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask;
}
static struct irq_chip wm8994_irq_chip = {
- .name = "wm8994",
- .bus_lock = wm8994_irq_lock,
- .bus_sync_unlock = wm8994_irq_sync_unlock,
- .mask = wm8994_irq_mask,
- .unmask = wm8994_irq_unmask,
+ .name = "wm8994",
+ .irq_bus_lock = wm8994_irq_lock,
+ .irq_bus_sync_unlock = wm8994_irq_sync_unlock,
+ .irq_mask = wm8994_irq_mask,
+ .irq_unmask = wm8994_irq_unmask,
};
/* The processing of the primary interrupt occurs in a thread so that
--
1.7.1
next prev parent reply other threads:[~2010-11-24 18:02 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-24 18:00 [PATCH 0/7] Wolfson MFD updates Mark Brown
2010-11-24 18:01 ` [PATCH 2.6.37 1/7] mfd: Supply IRQ base for WM832x devices Mark Brown
2010-11-24 18:01 ` [PATCH 2/7] mfd: Simplify WM832x subdevice instantiation Mark Brown
2010-11-24 18:01 ` [PATCH 3/7] mfd: Add WM8326 support Mark Brown
2010-11-24 18:01 ` [PATCH 4/7] mfd: Convert WM831x to new irq_ interrupt methods Mark Brown
2010-11-24 18:01 ` [PATCH 5/7] mfd: Convert WM835x " Mark Brown
2010-11-24 18:01 ` Mark Brown [this message]
2010-11-24 18:01 ` [PATCH 7/7] mfd: Add initial WM8958 support Mark Brown
2010-11-26 14:05 ` [PATCH 0/7] Wolfson MFD updates Samuel Ortiz
2010-11-26 14:07 ` Mark Brown
2010-11-26 14:51 ` Samuel Ortiz
2010-11-26 15:18 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1290621705-6926-6-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox