linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tejun Heo <tj@kernel.org>
To: linux-kernel@vger.kernel.org, mingo@redhat.com,
	tglx@linutronix.de, hpa@zytor.com, x86@kernel.org,
	eric.dumazet@gmail.com, yinghai@kernel.org, brgerst@gmail.com,
	gorcunov@gmail.com, penberg@kernel.org
Cc: Tejun Heo <tj@kernel.org>
Subject: [PATCH 01/16] x86: Kill unused static boot_cpu_logical_apicid in smpboot.c
Date: Sat, 27 Nov 2010 16:21:50 +0100	[thread overview]
Message-ID: <1290871325-3055-2-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1290871325-3055-1-git-send-email-tj@kernel.org>

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
---
 arch/x86/kernel/smpboot.c |    6 +-----
 1 files changed, 1 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 083e99d..4de6a00 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -165,8 +165,6 @@ static void unmap_cpu_to_node(int cpu)
 #endif
 
 #ifdef CONFIG_X86_32
-static int boot_cpu_logical_apicid;
-
 u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly =
 					{ [0 ... NR_CPUS-1] = BAD_APICID };
 
@@ -1101,9 +1099,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	 * Setup boot CPU information
 	 */
 	smp_store_cpu_info(0); /* Final full version of the data */
-#ifdef CONFIG_X86_32
-	boot_cpu_logical_apicid = logical_smp_processor_id();
-#endif
+
 	current_thread_info()->cpu = 0;  /* needed? */
 	for_each_possible_cpu(i) {
 		zalloc_cpumask_var(&per_cpu(cpu_sibling_map, i), GFP_KERNEL);
-- 
1.7.1


  reply	other threads:[~2010-11-27 15:25 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-27 15:21 [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#2 Tejun Heo
2010-11-27 15:21 ` Tejun Heo [this message]
2010-11-27 15:21 ` [PATCH 02/16] x86: Rename x86_32 MAX_APICID to MAX_LOCAL_APIC Tejun Heo
2010-11-27 15:21 ` [PATCH 03/16] x86: Make default_send_IPI_mask_sequence/allbutself_logical() 32bit only Tejun Heo
2010-11-27 15:21 ` [PATCH 04/16] x86: Use local variable to cache smp_processor_id() in setup_local_APIC() Tejun Heo
2010-11-27 21:32   ` Cyrill Gorcunov
2010-11-30 16:17   ` [PATCH UPDATED " Tejun Heo
2010-11-30 18:11   ` [PATCH UPDATED#2 " Tejun Heo
2010-11-30 18:22     ` Cyrill Gorcunov
2010-11-30 19:42       ` Tejun Heo
2010-11-30 20:52         ` Cyrill Gorcunov
2010-12-09  9:37     ` Pekka Enberg
2010-12-09 10:47   ` [PATCH UPDATED#3 04/16] x86: setup_local_APIC() must always be called with preemption disabled Tejun Heo
2010-12-09 16:17     ` Cyrill Gorcunov
2010-12-09 16:18     ` Pekka Enberg
2010-12-09 21:56     ` Thomas Gleixner
2010-12-10 11:09       ` Tejun Heo
2010-12-10 11:10         ` Thomas Gleixner
2010-12-10 12:48     ` [tip:x86/apic-cleanups] x86: apic: Cleanup and simplify setup_local_APIC() tip-bot for Tejun Heo
2010-11-27 15:21 ` [PATCH 05/16] x86: Replace cpu_2_logical_apicid[] with early percpu variable Tejun Heo
2010-11-27 15:21 ` [PATCH 06/16] x86: Always use x86_cpu_to_logical_apicid for cpu -> logical apic id Tejun Heo
2010-11-27 15:21 ` [PATCH 07/16] x86: Remove custom apic->cpu_to_logical_apicid() implementations Tejun Heo
2010-12-09 21:28   ` Thomas Gleixner
2010-12-10 11:12     ` Tejun Heo
2010-12-10 11:18       ` Thomas Gleixner
2010-11-27 15:21 ` [PATCH 08/16] x86: Use apic->cpu_to_logical_apicid() to find out logical apic id mapping early during boot Tejun Heo
2010-11-27 15:21 ` [PATCH 09/16] x86: Implement cpu_to_logical_apicid() for bigsmp_32 Tejun Heo
2010-11-27 15:21 ` [PATCH 10/16] x86: Implement cpu_to_logical_apicid() for summit_32 Tejun Heo
2010-11-27 15:22 ` [PATCH 11/16] x86: Implement cpu_to_logical_apicid() for numaq_32 Tejun Heo
2010-11-27 15:22 ` [PATCH 12/16] x86: Replace apic->apicid_to_node() with ->numa_cpu_node() Tejun Heo
2010-11-27 15:22 ` [PATCH 13/16] x86: Unify cpu/apicid <-> NUMA node mapping between 32 and 64bit Tejun Heo
2010-12-09 21:43   ` Thomas Gleixner
2010-12-10 20:45     ` Tejun Heo
2010-12-10 20:54       ` Tejun Heo
2010-12-10 21:17         ` Yinghai Lu
2010-11-27 15:22 ` [PATCH 14/16] x86: Unify CPU -> " Tejun Heo
2010-12-09 21:49   ` Thomas Gleixner
2010-12-10 11:13     ` Tejun Heo
2010-11-27 15:22 ` [PATCH 15/16] x86: Unify node_to_cpumask_map handling " Tejun Heo
2010-11-27 15:22 ` [PATCH 16/16] x86: Unify NUMA initialization " Tejun Heo
2010-12-07 16:22 ` [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#2 Tejun Heo
  -- strict thread matches above, loose matches on Subject: below --
2010-12-28 11:48 [PATCHSET REPOST] x86: unify x86_32 and 64 NUMA init paths, take#3 Tejun Heo
2010-12-28 11:48 ` [PATCH 01/16] x86: Kill unused static boot_cpu_logical_apicid in smpboot.c Tejun Heo
2010-12-30 17:49 [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#4 Tejun Heo
2010-12-30 17:49 ` [PATCH 01/16] x86: Kill unused static boot_cpu_logical_apicid in smpboot.c Tejun Heo
2011-01-11  3:48   ` David Rientjes
2011-01-23 13:37 [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#5 Tejun Heo
2011-01-23 13:37 ` [PATCH 01/16] x86: Kill unused static boot_cpu_logical_apicid in smpboot.c Tejun Heo
2011-01-24 19:50   ` Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1290871325-3055-2-git-send-email-tj@kernel.org \
    --to=tj@kernel.org \
    --cc=brgerst@gmail.com \
    --cc=eric.dumazet@gmail.com \
    --cc=gorcunov@gmail.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=penberg@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).