linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tejun Heo <tj@kernel.org>
To: linux-kernel@vger.kernel.org, mingo@redhat.com,
	tglx@linutronix.de, hpa@zytor.com, x86@kernel.org,
	eric.dumazet@gmail.com, yinghai@kernel.org, brgerst@gmail.com,
	gorcunov@gmail.com, penberg@kernel.org
Cc: Tejun Heo <tj@kernel.org>
Subject: [PATCH 07/16] x86: Remove custom apic->cpu_to_logical_apicid() implementations
Date: Sat, 27 Nov 2010 16:21:56 +0100	[thread overview]
Message-ID: <1290871325-3055-8-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1290871325-3055-1-git-send-email-tj@kernel.org>

After the previous patch, apic->cpu_to_logical_apicid() is no longer
used.  The callback will be repurposed.  Remove all the custom
implementations from bigsmp_32, es7000_32, numaq_32 and summit_32.

The removals are straight forward.  The function is removed and if
it's used elsewhere in the apic implementation, its users are modified
to do the mapping directly.

#ifdef's on CONFIG_SMP in es7000_32 summit_32 are ignored during
conversion as they are not used for UP kernels.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/apic/bigsmp_32.c |   19 +++++++------------
 arch/x86/kernel/apic/es7000_32.c |   18 ++----------------
 arch/x86/kernel/apic/numaq_32.c  |    8 --------
 arch/x86/kernel/apic/summit_32.c |   17 ++---------------
 4 files changed, 11 insertions(+), 51 deletions(-)

diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index cb804c5..4c62592 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -93,14 +93,6 @@ static int bigsmp_cpu_present_to_apicid(int mps_cpu)
 	return BAD_APICID;
 }
 
-/* Mapping from cpu number to logical apicid */
-static inline int bigsmp_cpu_to_logical_apicid(int cpu)
-{
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return cpu_physical_id(cpu);
-}
-
 static void bigsmp_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
 {
 	/* For clustered we don't have a good way to do this yet - hack */
@@ -115,7 +107,11 @@ static int bigsmp_check_phys_apicid_present(int phys_apicid)
 /* As we are using single CPU as destination, pick only one CPU here */
 static unsigned int bigsmp_cpu_mask_to_apicid(const struct cpumask *cpumask)
 {
-	return bigsmp_cpu_to_logical_apicid(cpumask_first(cpumask));
+	int cpu = cpumask_first(cpumask);
+
+	if (cpu < nr_cpu_ids)
+		return cpu_physical_id(cpu);
+	return BAD_APICID;
 }
 
 static unsigned int bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
@@ -129,9 +125,9 @@ static unsigned int bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	 */
 	for_each_cpu_and(cpu, cpumask, andmask) {
 		if (cpumask_test_cpu(cpu, cpu_online_mask))
-			break;
+			return cpu_physical_id(cpu);
 	}
-	return bigsmp_cpu_to_logical_apicid(cpu);
+	return BAD_APICID;
 }
 
 static int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb)
@@ -220,7 +216,6 @@ struct apic apic_bigsmp = {
 	.setup_apic_routing		= bigsmp_setup_apic_routing,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= bigsmp_apicid_to_node,
-	.cpu_to_logical_apicid		= bigsmp_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= bigsmp_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= physid_set_mask_of_physid,
 	.setup_portio_remap		= NULL,
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 7cb73e1..6840681 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -528,18 +528,6 @@ static void es7000_apicid_to_cpu_present(int phys_apicid, physid_mask_t *retmap)
 	++cpu_id;
 }
 
-/* Mapping from cpu number to logical apicid */
-static int es7000_cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return early_per_cpu(x86_cpu_to_logical_apicid, cpu);
-#else
-	return logical_smp_processor_id();
-#endif
-}
-
 static void es7000_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
 {
 	/* For clustered we don't have a good way to do this yet - hack */
@@ -561,7 +549,7 @@ static unsigned int es7000_cpu_mask_to_apicid(const struct cpumask *cpumask)
 	 * The cpus in the mask must all be on the apic cluster.
 	 */
 	for_each_cpu(cpu, cpumask) {
-		int new_apicid = es7000_cpu_to_logical_apicid(cpu);
+		int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
 
 		if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
 			WARN(1, "Not a valid mask!");
@@ -578,7 +566,7 @@ static unsigned int
 es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask,
 			      const struct cpumask *andmask)
 {
-	int apicid = es7000_cpu_to_logical_apicid(0);
+	int apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0);
 	cpumask_var_t cpumask;
 
 	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
@@ -656,7 +644,6 @@ struct apic __refdata apic_es7000_cluster = {
 	.setup_apic_routing		= es7000_setup_apic_routing,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= es7000_apicid_to_node,
-	.cpu_to_logical_apicid		= es7000_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= es7000_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= es7000_apicid_to_cpu_present,
 	.setup_portio_remap		= NULL,
@@ -721,7 +708,6 @@ struct apic __refdata apic_es7000 = {
 	.setup_apic_routing		= es7000_setup_apic_routing,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= es7000_apicid_to_node,
-	.cpu_to_logical_apicid		= es7000_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= es7000_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= es7000_apicid_to_cpu_present,
 	.setup_portio_remap		= NULL,
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 4ed90c4..2b434d5 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -373,13 +373,6 @@ static inline void numaq_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask
 	return physids_promote(0xFUL, retmap);
 }
 
-static inline int numaq_cpu_to_logical_apicid(int cpu)
-{
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return early_per_cpu(x86_cpu_to_logical_apicid, cpu);
-}
-
 /*
  * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
  * cpu to APIC ID relation to properly interact with the intelligent
@@ -509,7 +502,6 @@ struct apic __refdata apic_numaq = {
 	.setup_apic_routing		= numaq_setup_apic_routing,
 	.multi_timer_check		= numaq_multi_timer_check,
 	.apicid_to_node			= numaq_apicid_to_node,
-	.cpu_to_logical_apicid		= numaq_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= numaq_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= numaq_apicid_to_cpu_present,
 	.setup_portio_remap		= numaq_setup_portio_remap,
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index 82cfc3e..1ef4c14 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -241,18 +241,6 @@ static int summit_apicid_to_node(int logical_apicid)
 #endif
 }
 
-/* Mapping from cpu number to logical apicid */
-static inline int summit_cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return early_per_cpu(x86_cpu_to_logical_apicid, cpu);
-#else
-	return logical_smp_processor_id();
-#endif
-}
-
 static int summit_cpu_present_to_apicid(int mps_cpu)
 {
 	if (mps_cpu < nr_cpu_ids)
@@ -286,7 +274,7 @@ static unsigned int summit_cpu_mask_to_apicid(const struct cpumask *cpumask)
 	 * The cpus in the mask must all be on the apic cluster.
 	 */
 	for_each_cpu(cpu, cpumask) {
-		int new_apicid = summit_cpu_to_logical_apicid(cpu);
+		int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
 
 		if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
 			printk("%s: Not a valid mask!\n", __func__);
@@ -301,7 +289,7 @@ static unsigned int summit_cpu_mask_to_apicid(const struct cpumask *cpumask)
 static unsigned int summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
 			      const struct cpumask *andmask)
 {
-	int apicid = summit_cpu_to_logical_apicid(0);
+	int apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0);
 	cpumask_var_t cpumask;
 
 	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
@@ -529,7 +517,6 @@ struct apic apic_summit = {
 	.setup_apic_routing		= summit_setup_apic_routing,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= summit_apicid_to_node,
-	.cpu_to_logical_apicid		= summit_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= summit_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= summit_apicid_to_cpu_present,
 	.setup_portio_remap		= NULL,
-- 
1.7.1


  parent reply	other threads:[~2010-11-27 15:23 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-27 15:21 [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#2 Tejun Heo
2010-11-27 15:21 ` [PATCH 01/16] x86: Kill unused static boot_cpu_logical_apicid in smpboot.c Tejun Heo
2010-11-27 15:21 ` [PATCH 02/16] x86: Rename x86_32 MAX_APICID to MAX_LOCAL_APIC Tejun Heo
2010-11-27 15:21 ` [PATCH 03/16] x86: Make default_send_IPI_mask_sequence/allbutself_logical() 32bit only Tejun Heo
2010-11-27 15:21 ` [PATCH 04/16] x86: Use local variable to cache smp_processor_id() in setup_local_APIC() Tejun Heo
2010-11-27 21:32   ` Cyrill Gorcunov
2010-11-30 16:17   ` [PATCH UPDATED " Tejun Heo
2010-11-30 18:11   ` [PATCH UPDATED#2 " Tejun Heo
2010-11-30 18:22     ` Cyrill Gorcunov
2010-11-30 19:42       ` Tejun Heo
2010-11-30 20:52         ` Cyrill Gorcunov
2010-12-09  9:37     ` Pekka Enberg
2010-12-09 10:47   ` [PATCH UPDATED#3 04/16] x86: setup_local_APIC() must always be called with preemption disabled Tejun Heo
2010-12-09 16:17     ` Cyrill Gorcunov
2010-12-09 16:18     ` Pekka Enberg
2010-12-09 21:56     ` Thomas Gleixner
2010-12-10 11:09       ` Tejun Heo
2010-12-10 11:10         ` Thomas Gleixner
2010-12-10 12:48     ` [tip:x86/apic-cleanups] x86: apic: Cleanup and simplify setup_local_APIC() tip-bot for Tejun Heo
2010-11-27 15:21 ` [PATCH 05/16] x86: Replace cpu_2_logical_apicid[] with early percpu variable Tejun Heo
2010-11-27 15:21 ` [PATCH 06/16] x86: Always use x86_cpu_to_logical_apicid for cpu -> logical apic id Tejun Heo
2010-11-27 15:21 ` Tejun Heo [this message]
2010-12-09 21:28   ` [PATCH 07/16] x86: Remove custom apic->cpu_to_logical_apicid() implementations Thomas Gleixner
2010-12-10 11:12     ` Tejun Heo
2010-12-10 11:18       ` Thomas Gleixner
2010-11-27 15:21 ` [PATCH 08/16] x86: Use apic->cpu_to_logical_apicid() to find out logical apic id mapping early during boot Tejun Heo
2010-11-27 15:21 ` [PATCH 09/16] x86: Implement cpu_to_logical_apicid() for bigsmp_32 Tejun Heo
2010-11-27 15:21 ` [PATCH 10/16] x86: Implement cpu_to_logical_apicid() for summit_32 Tejun Heo
2010-11-27 15:22 ` [PATCH 11/16] x86: Implement cpu_to_logical_apicid() for numaq_32 Tejun Heo
2010-11-27 15:22 ` [PATCH 12/16] x86: Replace apic->apicid_to_node() with ->numa_cpu_node() Tejun Heo
2010-11-27 15:22 ` [PATCH 13/16] x86: Unify cpu/apicid <-> NUMA node mapping between 32 and 64bit Tejun Heo
2010-12-09 21:43   ` Thomas Gleixner
2010-12-10 20:45     ` Tejun Heo
2010-12-10 20:54       ` Tejun Heo
2010-12-10 21:17         ` Yinghai Lu
2010-11-27 15:22 ` [PATCH 14/16] x86: Unify CPU -> " Tejun Heo
2010-12-09 21:49   ` Thomas Gleixner
2010-12-10 11:13     ` Tejun Heo
2010-11-27 15:22 ` [PATCH 15/16] x86: Unify node_to_cpumask_map handling " Tejun Heo
2010-11-27 15:22 ` [PATCH 16/16] x86: Unify NUMA initialization " Tejun Heo
2010-12-07 16:22 ` [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#2 Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1290871325-3055-8-git-send-email-tj@kernel.org \
    --to=tj@kernel.org \
    --cc=brgerst@gmail.com \
    --cc=eric.dumazet@gmail.com \
    --cc=gorcunov@gmail.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=penberg@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).