From: Tejun Heo <tj@kernel.org>
To: linux-kernel@vger.kernel.org, mingo@redhat.com,
tglx@linutronix.de, hpa@zytor.com, x86@kernel.org,
eric.dumazet@gmail.com, yinghai@kernel.org, brgerst@gmail.com,
gorcunov@gmail.com, penberg@kernel.org, shaohui.zheng@intel.com,
rientjes@google.com
Cc: Tejun Heo <tj@kernel.org>
Subject: [PATCH 12/16] x86: Replace apic->apicid_to_node() with ->x86_32_numa_cpu_node()
Date: Thu, 30 Dec 2010 18:49:25 +0100 [thread overview]
Message-ID: <1293731369-10851-13-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1293731369-10851-1-git-send-email-tj@kernel.org>
apic->apicid_to_node() is 32bit specific apic operation which
determines NUMA node for a CPU. Depending on the APIC implementation,
it can be easier to determine NUMA node from either physical or
logical apicid. Currently, ->apicid_to_node() takes @logical_apicid
and calls hard_smp_processor_id() if the physical apicid is needed.
This prevents NUMA mapping from being queried from a different CPU,
which in turn makes it impossible to initialize NUMA mapping before
SMP bringup.
This patch replaces apic->apicid_to_node() with
->x86_32_numa_cpu_node() which takes @cpu, from which both logical and
physical apicids can easily be determined. While at it, drop
duplicate implementations from bigsmp_32 and summit_32, and use the
default one.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
---
arch/x86/include/asm/apic.h | 6 ++++--
arch/x86/kernel/apic/apic.c | 10 +++++++---
arch/x86/kernel/apic/apic_flat_64.c | 2 --
arch/x86/kernel/apic/apic_noop.c | 16 +++++++++-------
arch/x86/kernel/apic/bigsmp_32.c | 7 +------
arch/x86/kernel/apic/es7000_32.c | 7 +++----
arch/x86/kernel/apic/numaq_32.c | 11 ++++++++++-
arch/x86/kernel/apic/probe_32.c | 2 +-
arch/x86/kernel/apic/summit_32.c | 11 +----------
arch/x86/kernel/apic/x2apic_cluster.c | 1 -
arch/x86/kernel/apic/x2apic_phys.c | 1 -
arch/x86/kernel/apic/x2apic_uv_x.c | 1 -
arch/x86/kernel/smpboot.c | 3 +--
13 files changed, 37 insertions(+), 41 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index efb073b..ad30ca4 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -306,7 +306,6 @@ struct apic {
void (*setup_apic_routing)(void);
int (*multi_timer_check)(int apic, int irq);
- int (*apicid_to_node)(int logical_apicid);
int (*cpu_present_to_apicid)(int mps_cpu);
void (*apicid_to_cpu_present)(int phys_apicid, physid_mask_t *retmap);
void (*setup_portio_remap)(void);
@@ -367,6 +366,9 @@ struct apic {
* won't be applied properly during early boot in this case.
*/
int (*x86_32_early_logical_apicid)(int cpu);
+
+ /* determine CPU -> NUMA node mapping */
+ int (*x86_32_numa_cpu_node)(int cpu);
#endif
};
@@ -539,7 +541,7 @@ static inline int default_phys_pkg_id(int cpuid_apic, int index_msb)
return cpuid_apic >> index_msb;
}
-extern int default_apicid_to_node(int logical_apicid);
+extern int default_x86_32_numa_cpu_node(int cpu);
#endif
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 6a82dc6..5e097e5 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2023,10 +2023,14 @@ void default_init_apic_ldr(void)
}
#ifdef CONFIG_X86_32
-int default_apicid_to_node(int logical_apicid)
+int default_x86_32_numa_cpu_node(int cpu)
{
-#ifdef CONFIG_SMP
- return apicid_2_node[hard_smp_processor_id()];
+#ifdef CONFIG_NUMA
+ int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
+
+ if (apicid != BAD_APICID)
+ return apicid_2_node[apicid];
+ return NUMA_NO_NODE;
#else
return 0;
#endif
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 5a9d11a..5652d31 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -185,7 +185,6 @@ struct apic apic_flat = {
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.multi_timer_check = NULL,
- .apicid_to_node = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = NULL,
.setup_portio_remap = NULL,
@@ -336,7 +335,6 @@ struct apic apic_physflat = {
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.multi_timer_check = NULL,
- .apicid_to_node = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = NULL,
.setup_portio_remap = NULL,
diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c
index 0309c58..f1baa2d 100644
--- a/arch/x86/kernel/apic/apic_noop.c
+++ b/arch/x86/kernel/apic/apic_noop.c
@@ -108,12 +108,6 @@ static void noop_vector_allocation_domain(int cpu, struct cpumask *retmask)
cpumask_set_cpu(cpu, retmask);
}
-int noop_apicid_to_node(int logical_apicid)
-{
- /* we're always on node 0 */
- return 0;
-}
-
static u32 noop_apic_read(u32 reg)
{
WARN_ON_ONCE((cpu_has_apic && !disable_apic));
@@ -125,6 +119,14 @@ static void noop_apic_write(u32 reg, u32 v)
WARN_ON_ONCE(cpu_has_apic && !disable_apic);
}
+#ifdef CONFIG_X86_32
+static int noop_x86_32_numa_cpu_node(int cpu)
+{
+ /* we're always on node 0 */
+ return 0;
+}
+#endif
+
struct apic apic_noop = {
.name = "noop",
.probe = noop_probe,
@@ -148,7 +150,6 @@ struct apic apic_noop = {
.ioapic_phys_id_map = default_ioapic_phys_id_map,
.setup_apic_routing = NULL,
.multi_timer_check = NULL,
- .apicid_to_node = noop_apicid_to_node,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = physid_set_mask_of_physid,
@@ -194,5 +195,6 @@ struct apic apic_noop = {
#ifdef CONFIG_X86_32
.x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid,
+ .x86_32_numa_cpu_node = noop_x86_32_numa_cpu_node,
#endif
};
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index bc7ed04..541a2e4 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -86,11 +86,6 @@ static void bigsmp_setup_apic_routing(void)
nr_ioapics);
}
-static int bigsmp_apicid_to_node(int logical_apicid)
-{
- return apicid_2_node[hard_smp_processor_id()];
-}
-
static int bigsmp_cpu_present_to_apicid(int mps_cpu)
{
if (mps_cpu < nr_cpu_ids)
@@ -221,7 +216,6 @@ struct apic apic_bigsmp = {
.ioapic_phys_id_map = bigsmp_ioapic_phys_id_map,
.setup_apic_routing = bigsmp_setup_apic_routing,
.multi_timer_check = NULL,
- .apicid_to_node = bigsmp_apicid_to_node,
.cpu_present_to_apicid = bigsmp_cpu_present_to_apicid,
.apicid_to_cpu_present = physid_set_mask_of_physid,
.setup_portio_remap = NULL,
@@ -259,4 +253,5 @@ struct apic apic_bigsmp = {
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = bigsmp_early_logical_apicid,
+ .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node,
};
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 5c53d05..3e9de48 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -510,12 +510,11 @@ static void es7000_setup_apic_routing(void)
nr_ioapics, cpumask_bits(es7000_target_cpus())[0]);
}
-static int es7000_apicid_to_node(int logical_apicid)
+static int es7000_numa_cpu_node(int cpu)
{
return 0;
}
-
static int es7000_cpu_present_to_apicid(int mps_cpu)
{
if (!mps_cpu)
@@ -649,7 +648,6 @@ struct apic __refdata apic_es7000_cluster = {
.ioapic_phys_id_map = es7000_ioapic_phys_id_map,
.setup_apic_routing = es7000_setup_apic_routing,
.multi_timer_check = NULL,
- .apicid_to_node = es7000_apicid_to_node,
.cpu_present_to_apicid = es7000_cpu_present_to_apicid,
.apicid_to_cpu_present = es7000_apicid_to_cpu_present,
.setup_portio_remap = NULL,
@@ -690,6 +688,7 @@ struct apic __refdata apic_es7000_cluster = {
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = es7000_early_logical_apicid,
+ .x86_32_numa_cpu_node = es7000_numa_cpu_node,
};
struct apic __refdata apic_es7000 = {
@@ -715,7 +714,6 @@ struct apic __refdata apic_es7000 = {
.ioapic_phys_id_map = es7000_ioapic_phys_id_map,
.setup_apic_routing = es7000_setup_apic_routing,
.multi_timer_check = NULL,
- .apicid_to_node = es7000_apicid_to_node,
.cpu_present_to_apicid = es7000_cpu_present_to_apicid,
.apicid_to_cpu_present = es7000_apicid_to_cpu_present,
.setup_portio_remap = NULL,
@@ -754,4 +752,5 @@ struct apic __refdata apic_es7000 = {
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = es7000_early_logical_apicid,
+ .x86_32_numa_cpu_node = es7000_numa_cpu_node,
};
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index f1a8b12..6273eee 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -391,6 +391,15 @@ static inline int numaq_apicid_to_node(int logical_apicid)
return logical_apicid >> 4;
}
+static int numaq_numa_cpu_node(int cpu)
+{
+ int logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
+
+ if (logical_apicid != BAD_APICID)
+ return numaq_apicid_to_node(logical_apicid);
+ return NUMA_NO_NODE;
+}
+
static void numaq_apicid_to_cpu_present(int logical_apicid, physid_mask_t *retmap)
{
int node = numaq_apicid_to_node(logical_apicid);
@@ -501,7 +510,6 @@ struct apic __refdata apic_numaq = {
.ioapic_phys_id_map = numaq_ioapic_phys_id_map,
.setup_apic_routing = numaq_setup_apic_routing,
.multi_timer_check = numaq_multi_timer_check,
- .apicid_to_node = numaq_apicid_to_node,
.cpu_present_to_apicid = numaq_cpu_present_to_apicid,
.apicid_to_cpu_present = numaq_apicid_to_cpu_present,
.setup_portio_remap = numaq_setup_portio_remap,
@@ -541,4 +549,5 @@ struct apic __refdata apic_numaq = {
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid,
+ .x86_32_numa_cpu_node = numaq_numa_cpu_node,
};
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 0f9a9ab..fc84c7b 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -135,7 +135,6 @@ struct apic apic_default = {
.ioapic_phys_id_map = default_ioapic_phys_id_map,
.setup_apic_routing = setup_apic_flat_routing,
.multi_timer_check = NULL,
- .apicid_to_node = default_apicid_to_node,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = physid_set_mask_of_physid,
.setup_portio_remap = NULL,
@@ -173,6 +172,7 @@ struct apic apic_default = {
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = default_x86_32_early_logical_apicid,
+ .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node,
};
extern struct apic apic_numaq;
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index 8c91473..e4b8059 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -239,15 +239,6 @@ static void summit_setup_apic_routing(void)
nr_ioapics);
}
-static int summit_apicid_to_node(int logical_apicid)
-{
-#ifdef CONFIG_SMP
- return apicid_2_node[hard_smp_processor_id()];
-#else
- return 0;
-#endif
-}
-
static int summit_cpu_present_to_apicid(int mps_cpu)
{
if (mps_cpu < nr_cpu_ids)
@@ -523,7 +514,6 @@ struct apic apic_summit = {
.ioapic_phys_id_map = summit_ioapic_phys_id_map,
.setup_apic_routing = summit_setup_apic_routing,
.multi_timer_check = NULL,
- .apicid_to_node = summit_apicid_to_node,
.cpu_present_to_apicid = summit_cpu_present_to_apicid,
.apicid_to_cpu_present = summit_apicid_to_cpu_present,
.setup_portio_remap = NULL,
@@ -561,4 +551,5 @@ struct apic apic_summit = {
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = summit_early_logical_apicid,
+ .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node,
};
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index badc1fd..90949bb 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -206,7 +206,6 @@ struct apic apic_x2apic_cluster = {
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.multi_timer_check = NULL,
- .apicid_to_node = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = NULL,
.setup_portio_remap = NULL,
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index f28bf4c..c7e6d66 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -195,7 +195,6 @@ struct apic apic_x2apic_phys = {
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.multi_timer_check = NULL,
- .apicid_to_node = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = NULL,
.setup_portio_remap = NULL,
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 365f53d..e654ff9 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -315,7 +315,6 @@ struct apic __refdata apic_x2apic_uv_x = {
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.multi_timer_check = NULL,
- .apicid_to_node = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = NULL,
.setup_portio_remap = NULL,
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 0768761..031d2e1 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -168,10 +168,9 @@ static void unmap_cpu_to_node(int cpu)
static void map_cpu_to_logical_apicid(void)
{
int cpu = smp_processor_id();
- int logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
int node;
- node = apic->apicid_to_node(logical_apicid);
+ node = apic->x86_32_numa_cpu_node(cpu);
if (!node_online(node))
node = first_online_node;
--
1.7.1
next prev parent reply other threads:[~2010-12-30 17:49 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-30 17:49 [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#4 Tejun Heo
2010-12-30 17:49 ` [PATCH 01/16] x86: Kill unused static boot_cpu_logical_apicid in smpboot.c Tejun Heo
2011-01-11 3:48 ` David Rientjes
2010-12-30 17:49 ` [PATCH 02/16] x86: Rename x86_32 MAX_APICID to MAX_LOCAL_APIC Tejun Heo
2011-01-11 3:48 ` David Rientjes
2010-12-30 17:49 ` [PATCH 03/16] x86: Make default_send_IPI_mask_sequence/allbutself_logical() 32bit only Tejun Heo
2011-01-11 3:48 ` David Rientjes
2010-12-30 17:49 ` [PATCH 04/16] x86: Replace cpu_2_logical_apicid[] with early percpu variable Tejun Heo
2011-01-11 3:48 ` David Rientjes
2011-01-11 14:19 ` Tejun Heo
2010-12-30 17:49 ` [PATCH 05/16] x86: Always use x86_cpu_to_logical_apicid for cpu -> logical apic id Tejun Heo
2011-01-13 2:40 ` David Rientjes
2011-01-13 10:57 ` Tejun Heo
2010-12-30 17:49 ` [PATCH 06/16] x86: Kill apic->cpu_to_logical_apicid() Tejun Heo
2011-01-13 2:40 ` David Rientjes
2010-12-30 17:49 ` [PATCH 07/16] x86: Add apic->x86_32_early_logical_apicid() Tejun Heo
2010-12-30 17:49 ` [PATCH 08/16] x86: Implement the default x86_32_early_logical_apicid() Tejun Heo
2010-12-30 17:49 ` [PATCH 09/16] x86: Implement x86_32_early_logical_apicid() for bigsmp_32 Tejun Heo
2010-12-30 17:49 ` [PATCH 10/16] x86: Implement x86_32_early_logical_apicid() for summit_32 Tejun Heo
2010-12-30 17:49 ` [PATCH 11/16] x86: Implement x86_32_early_logical_apicid() for numaq_32 Tejun Heo
2010-12-30 17:49 ` Tejun Heo [this message]
2010-12-30 17:49 ` [PATCH 13/16] x86: Unify cpu/apicid <-> NUMA node mapping between 32 and 64bit Tejun Heo
2010-12-30 17:49 ` [PATCH 14/16] x86: Unify CPU -> " Tejun Heo
2010-12-30 17:49 ` [PATCH 15/16] x86: Unify node_to_cpumask_map handling " Tejun Heo
2010-12-30 17:49 ` [PATCH 16/16] x86: Unify NUMA initialization " Tejun Heo
2010-12-30 20:14 ` [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#4 H. Peter Anvin
2011-01-21 18:16 ` Tejun Heo
2011-01-21 18:49 ` H. Peter Anvin
-- strict thread matches above, loose matches on Subject: below --
2011-01-23 13:37 [PATCHSET] x86: unify x86_32 and 64 NUMA init paths, take#5 Tejun Heo
2011-01-23 13:37 ` [PATCH 12/16] x86: Replace apic->apicid_to_node() with ->x86_32_numa_cpu_node() Tejun Heo
2010-12-28 11:48 [PATCHSET REPOST] x86: unify x86_32 and 64 NUMA init paths, take#3 Tejun Heo
2010-12-28 11:48 ` [PATCH 12/16] x86: Replace apic->apicid_to_node() with ->x86_32_numa_cpu_node() Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1293731369-10851-13-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=brgerst@gmail.com \
--cc=eric.dumazet@gmail.com \
--cc=gorcunov@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=penberg@kernel.org \
--cc=rientjes@google.com \
--cc=shaohui.zheng@intel.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).