From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@linux.intel.com>
Cc: linux-kernel@vger.kernel.org,
patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 2.6.38] mfd: Don't suspend WM8994 if the CODEC is not suspended
Date: Fri, 4 Feb 2011 14:57:43 +0000 [thread overview]
Message-ID: <1296831463-19643-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
ASoC supports keeping the audio subsysetm active over suspend in order
to support use cases such as audio passthrough from a cellular modem
with the main CPU suspended. Ensure that we don't power down the CODEC
when this is happening by checking to see if VMID is up and skipping
suspend and resume when it is. If the CODEC has suspended then it'll
turn VMID off before the core suspend() gets called.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
This is a bug fix for interaction with the ASoC suspend feature.
Ideally it'd get CCed to stable as well but it's slightly invasive for
that.
drivers/mfd/wm8994-core.c | 18 ++++++++++++++++++
include/linux/mfd/wm8994/core.h | 1 +
2 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 41233c7..f4016a0 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -246,6 +246,16 @@ static int wm8994_suspend(struct device *dev)
struct wm8994 *wm8994 = dev_get_drvdata(dev);
int ret;
+ /* Don't actually go through with the suspend if the CODEC is
+ * still active (eg, for audio passthrough from CP. */
+ ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_1);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read power status: %d\n", ret);
+ } else if (ret & WM8994_VMID_SEL_MASK) {
+ dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+ return 0;
+ }
+
/* GPIO configuration state is saved here since we may be configuring
* the GPIO alternate functions even if we're not using the gpiolib
* driver for them.
@@ -261,6 +271,8 @@ static int wm8994_suspend(struct device *dev)
if (ret < 0)
dev_err(dev, "Failed to save LDO registers: %d\n", ret);
+ wm8994->suspended = true;
+
ret = regulator_bulk_disable(wm8994->num_supplies,
wm8994->supplies);
if (ret != 0) {
@@ -276,6 +288,10 @@ static int wm8994_resume(struct device *dev)
struct wm8994 *wm8994 = dev_get_drvdata(dev);
int ret;
+ /* We may have lied to the PM core about suspending */
+ if (!wm8994->suspended)
+ return 0;
+
ret = regulator_bulk_enable(wm8994->num_supplies,
wm8994->supplies);
if (ret != 0) {
@@ -298,6 +314,8 @@ static int wm8994_resume(struct device *dev)
if (ret < 0)
dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
+ wm8994->suspended = false;
+
return 0;
}
#endif
diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h
index 3fd3684..ef4f0b6 100644
--- a/include/linux/mfd/wm8994/core.h
+++ b/include/linux/mfd/wm8994/core.h
@@ -71,6 +71,7 @@ struct wm8994 {
u16 irq_masks_cache[WM8994_NUM_IRQ_REGS];
/* Used over suspend/resume */
+ bool suspended;
u16 ldo_regs[WM8994_NUM_LDO_REGS];
u16 gpio_regs[WM8994_NUM_GPIO_REGS];
--
1.7.2.3
next reply other threads:[~2011-02-04 14:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-04 14:57 Mark Brown [this message]
2011-02-21 12:03 ` [PATCH 2.6.38] mfd: Don't suspend WM8994 if the CODEC is not suspended Samuel Ortiz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1296831463-19643-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox