From: "Justin P. Mattock" <justinmattock@gmail.com>
To: trivial@kernel.org
Cc: linux-kernel@vger.kernel.org,
"Justin P. Mattock" <justinmattock@gmail.com>
Subject: [RFC V2 05/21]drivers:scsi Remove extra semi-colon.
Date: Thu, 24 Mar 2011 13:18:24 -0700 [thread overview]
Message-ID: <1300997920-31573-5-git-send-email-justinmattock@gmail.com> (raw)
In-Reply-To: <1300997920-31573-1-git-send-email-justinmattock@gmail.com>
The patch below removes an extra semi-colon from various parts
of the kernel. Please have a look when you have time, and let
me know if its legit or not.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
---
drivers/scsi/be2iscsi/be_main.c | 4 ++--
drivers/scsi/lpfc/lpfc_bsg.c | 2 +-
drivers/scsi/pm8001/pm8001_init.c | 2 +-
drivers/scsi/qla2xxx/qla_isr.c | 4 ++--
4 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 24e20ba..44ac4ae 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -618,7 +618,7 @@ static void beiscsi_get_params(struct beiscsi_hba *phba)
+ BE2_NOPOUT_REQ));
phba->params.cxns_per_ctrl = phba->fw_config.iscsi_cid_count;
phba->params.asyncpdus_per_ctrl = phba->fw_config.iscsi_cid_count * 2;
- phba->params.icds_per_ctrl = phba->fw_config.iscsi_icd_count;;
+ phba->params.icds_per_ctrl = phba->fw_config.iscsi_icd_count;
phba->params.num_sge_per_io = BE2_SGE;
phba->params.defpdu_hdr_sz = BE2_DEFPDU_HDR_SZ;
phba->params.defpdu_data_sz = BE2_DEFPDU_DATA_SZ;
@@ -781,7 +781,7 @@ static irqreturn_t be_isr(int irq, void *dev_id)
int isr;
phba = dev_id;
- ctrl = &phba->ctrl;;
+ ctrl = &phba->ctrl;
isr = ioread32(ctrl->csr + CEV_ISR0_OFFSET +
(PCI_FUNC(ctrl->pdev->devfn) * CEV_ISR_SIZE));
if (!isr)
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 0dd43bb..04fef03 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -595,7 +595,7 @@ lpfc_bsg_rport_els(struct fc_bsg_job *job)
dd_data->context_un.iocb.cmdiocbq = cmdiocbq;
dd_data->context_un.iocb.rspiocbq = rspiocbq;
dd_data->context_un.iocb.set_job = job;
- dd_data->context_un.iocb.bmp = NULL;;
+ dd_data->context_un.iocb.bmp = NULL;
dd_data->context_un.iocb.ndlp = ndlp;
if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 002360d..172cefb 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -160,7 +160,7 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
static void pm8001_tasklet(unsigned long opaque)
{
struct pm8001_hba_info *pm8001_ha;
- pm8001_ha = (struct pm8001_hba_info *)opaque;;
+ pm8001_ha = (struct pm8001_hba_info *)opaque;
if (unlikely(!pm8001_ha))
BUG_ON(1);
PM8001_CHIP_DISP->isr(pm8001_ha);
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d17ed9a..8b4d99a 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1051,7 +1051,7 @@ qla2x00_ct_entry(scsi_qla_host_t *vha, struct req_que *req,
}
DEBUG2(qla2x00_dump_buffer((uint8_t *)pkt, sizeof(*pkt)));
} else {
- bsg_job->reply->result = DID_OK << 16;;
+ bsg_job->reply->result = DID_OK << 16;
bsg_job->reply->reply_payload_rcv_len =
bsg_job->reply_payload.payload_len;
bsg_job->reply_len = 0;
@@ -1146,7 +1146,7 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req,
DEBUG2(qla2x00_dump_buffer((uint8_t *)pkt, sizeof(*pkt)));
}
else {
- bsg_job->reply->result = DID_OK << 16;;
+ bsg_job->reply->result = DID_OK << 16;
bsg_job->reply->reply_payload_rcv_len = bsg_job->reply_payload.payload_len;
bsg_job->reply_len = 0;
}
--
1.7.4.1
next prev parent reply other threads:[~2011-03-24 20:23 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-24 20:18 [RFC V2 01/21]arch:arm:mach Remove extra semi-colon Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 02/21]arch:ia64 " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 03/21]arch:um:drivers:mmapper_kern.c " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 04/21]arch:s390:hypfs:hypfs.h " Justin P. Mattock
2011-03-24 20:18 ` Justin P. Mattock [this message]
2011-03-24 20:18 ` [RFC V2 06/21]drivers:leds:leds-mc13783.c " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 07/21]drivers:xen " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 08/21]drivers:tty:serial:mrst_max3110.c " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 09/21]drivers:power:intel_mid_battery.c " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 10/21]drivers:gpio:langwell_gpio.c " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 11/21]drivers:net " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 12/21]drivers:video:mxsfb.c " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 13/21]drivers:i2c:busses:i2c-designware.c " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 14/21]drivers:staging " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 15/21]drivers:target " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 16/21]fs:logfs " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 17/21]kernel:pm_qos_params.c " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 18/21]mm:hugetlb.c " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 19/21]net remove " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 20/21]security:selinux:selinuxfs.c Remove " Justin P. Mattock
2011-03-24 20:18 ` [RFC V2 21/21]tools:power:x86:turbostat:turbostat.c " Justin P. Mattock
2011-04-10 15:09 ` [RFC V2 01/21]arch:arm:mach " Jiri Kosina
2011-04-10 18:49 ` Justin P. Mattock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1300997920-31573-5-git-send-email-justinmattock@gmail.com \
--to=justinmattock@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox