From: Christopher Heiny <cheiny@synaptics.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>,
Linux Kernel <linux-kernel@vger.kernel.org>,
Linux Input <linux-input@vger.kernel.org>,
Christopher Heiny <cheiny@synaptics.com>,
Allie Xiong <axiong@synaptics.com>,
William Manson <wmanson@synaptics.com>,
Joerie de Gram <j.de.gram@gmail.com>,
Linus Walleij <linus.walleij@stericsson.com>,
Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
Subject: [PATCH 3/3] (corrected) input/touchscreen: Synaptics RMI4 Touchscreen Driver
Date: Wed, 30 Mar 2011 07:05:27 -0700 [thread overview]
Message-ID: <1301493927-30237-4-git-send-email-cheiny@synaptics.com> (raw)
In-Reply-To: <1301493927-30237-1-git-send-email-cheiny@synaptics.com>
Driver for Synaptics touchscreens using RMI4 protocol.
Signed-off-by: William Manson <wmanson@synaptics.com>
Signed-off-by: Allie Xiong <axiong@synaptics.com>
Signed-off-by: Christopher Heiny <cheiny@synaptics.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
Cc: Joeri de Gram <j.de.gram@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
---
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 718bcc8..3181008 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -41,6 +41,16 @@ obj-$(CONFIG_TOUCHSCREEN_QT602240) += qt602240_ts.o
obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o
obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o
+CFLAGS_rmi_bus.o := -DDEBUG
+CFLAGS_rmi_sensor.o := -DDEBUG
+CFLAGS_rmi_function.o := -DDEBUG
+CFLAGS_rmi_f01.o := -DDEBUG
+CFLAGS_rmi_f11.o := -DDEBUG
+CFLAGS_rmi_f19.o := -DDEBUG
+CFLAGS_rmi_f34.o := -DDEBUG
+CFLAGS_rmi_i2c.o := -DDEBUG
+obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C) += rmi_bus.o rmi_sensor.o rmi_function.o rmi_f01.o rmi_f11.o rmi_f19.o rmi_f34.o rmi_i2c.o
+obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_SPI) += rmi_bus.o rmi_sensor.o rmi_function.o rmi_f01.o rmi_f11.o rmi_f19.o rmi_f34.o rmi_spi.o
obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 61834ae..2b2f6dc 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -362,6 +362,36 @@ config TOUCHSCREEN_MIGOR
To compile this driver as a module, choose M here: the
module will be called migor_ts.
+config TOUCHSCREEN_SYNAPTICS_RMI4_I2C
+ tristate "Synaptics RMI4 I2C touchscreens"
+ depends on I2C
+ help
+ Say Y here if you have a Synaptics RMI4 I2C touchscreen connected to
+ your system. This enables support for Synaptics RMI4 over I2C based
+ touchscreens.
+
+ If unsure, say N.
+
+ To compile this driver as a set of modules, choose M here: the
+ modules will be called rmi_core, rmi_app_touchpad, rmi_phys_i2c.
+
+config TOUCHSCREEN_SYNAPTICS_RMI4_SPI
+ tristate "Synaptics RMI4 SPI touchscreens"
+ depends on SPI
+ help
+ Say Y here if you have a Synaptics RMI4 SPI touchscreen connected to
+ your system. This enables support for Synaptics RMI4 over SPI based
+ touchscreens.
+
+ If unsure, say N.
+
+ To compile this driver as a set of modules, choose M here: the
+ modules will be called rmi_core, rmi_app_touchpad, rmi_phys_spi.
+
+config SYNA_MULTI_TOUCH
+ bool "Synaptics pointing using multi-touch events"
+ depends on TOUCHSCREEN_SYNAPTICS_RMI4_I2C || TOUCHSCREEN_SYNAPTICS_RMI4_SPI
+
config TOUCHSCREEN_TNETV107X
tristate "TI TNETV107X touchscreen support"
depends on ARCH_DAVINCI_TNETV107X
next prev parent reply other threads:[~2011-03-30 14:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-30 14:05 [PATCH 0/3] input/touchscreen: Synaptics RMI4 Touchscreen Driver Christopher Heiny
2011-03-30 14:05 ` [PATCH 1/3] (corrected) " Christopher Heiny
2011-03-30 14:05 ` [PATCH 2/3] " Christopher Heiny
2011-03-30 14:05 ` Christopher Heiny [this message]
2011-03-30 20:02 ` [PATCH 0/3] " Dmitry Torokhov
2011-03-30 20:49 ` Christopher Heiny
2011-03-31 2:35 ` Christopher Heiny
-- strict thread matches above, loose matches on Subject: below --
2011-03-31 2:39 [PATCH 0/3] (corrected) " Christopher Heiny
2011-03-31 2:39 ` [PATCH 3/3] " Christopher Heiny
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1301493927-30237-4-git-send-email-cheiny@synaptics.com \
--to=cheiny@synaptics.com \
--cc=axiong@synaptics.com \
--cc=dmitry.torokhov@gmail.com \
--cc=j.de.gram@gmail.com \
--cc=khali@linux-fr.org \
--cc=linus.walleij@stericsson.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=naveen.gaddipati@stericsson.com \
--cc=wmanson@synaptics.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox