From: Joerg Roedel <joerg.roedel@amd.com>
To: <iommu@lists.linux-foundation.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>,
Joerg Roedel <joerg.roedel@amd.com>
Subject: [PATCH 1/2] x86/amd-iommu: Add extended feature detection
Date: Mon, 11 Apr 2011 11:32:03 +0200 [thread overview]
Message-ID: <1302514324-14717-2-git-send-email-joerg.roedel@amd.com> (raw)
In-Reply-To: <1302514324-14717-1-git-send-email-joerg.roedel@amd.com>
This patch adds detection of the extended features of an
AMD IOMMU. The available features are printed to dmesg on
boot.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
arch/x86/include/asm/amd_iommu_proto.h | 8 ++++++++
arch/x86/include/asm/amd_iommu_types.h | 17 +++++++++++++++++
arch/x86/kernel/amd_iommu.c | 2 +-
arch/x86/kernel/amd_iommu_init.c | 26 +++++++++++++++++++++++---
4 files changed, 49 insertions(+), 4 deletions(-)
diff --git a/arch/x86/include/asm/amd_iommu_proto.h b/arch/x86/include/asm/amd_iommu_proto.h
index 1223c0f..30d1594 100644
--- a/arch/x86/include/asm/amd_iommu_proto.h
+++ b/arch/x86/include/asm/amd_iommu_proto.h
@@ -42,4 +42,12 @@ static inline bool is_rd890_iommu(struct pci_dev *pdev)
(pdev->device == PCI_DEVICE_ID_RD890_IOMMU);
}
+static inline bool iommu_feature(struct amd_iommu *iommu, u64 f)
+{
+ if (!(iommu->cap & (1 << IOMMU_CAP_EFR)))
+ return false;
+
+ return !!(iommu->features & f);
+}
+
#endif /* _ASM_X86_AMD_IOMMU_PROTO_H */
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 878ae00..5c24e46 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -68,12 +68,25 @@
#define MMIO_CONTROL_OFFSET 0x0018
#define MMIO_EXCL_BASE_OFFSET 0x0020
#define MMIO_EXCL_LIMIT_OFFSET 0x0028
+#define MMIO_EXT_FEATURES 0x0030
#define MMIO_CMD_HEAD_OFFSET 0x2000
#define MMIO_CMD_TAIL_OFFSET 0x2008
#define MMIO_EVT_HEAD_OFFSET 0x2010
#define MMIO_EVT_TAIL_OFFSET 0x2018
#define MMIO_STATUS_OFFSET 0x2020
+
+/* Extended Feature Bits */
+#define FEATURE_PREFETCH (1ULL<<0)
+#define FEATURE_PPR (1ULL<<1)
+#define FEATURE_X2APIC (1ULL<<2)
+#define FEATURE_NX (1ULL<<3)
+#define FEATURE_GT (1ULL<<4)
+#define FEATURE_IA (1ULL<<6)
+#define FEATURE_GA (1ULL<<7)
+#define FEATURE_HE (1ULL<<8)
+#define FEATURE_PC (1ULL<<9)
+
/* MMIO status bits */
#define MMIO_STATUS_COM_WAIT_INT_MASK 0x04
@@ -227,6 +240,7 @@
/* IOMMU capabilities */
#define IOMMU_CAP_IOTLB 24
#define IOMMU_CAP_NPCACHE 26
+#define IOMMU_CAP_EFR 27
#define MAX_DOMAIN_ID 65536
@@ -371,6 +385,9 @@ struct amd_iommu {
/* flags read from acpi table */
u8 acpi_flags;
+ /* Extended features */
+ u64 features;
+
/*
* Capability pointer. There could be more than one IOMMU per PCI
* device function if there are more than one AMD IOMMU capability
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index bcf58ea..d609610 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -29,8 +29,8 @@
#include <asm/proto.h>
#include <asm/iommu.h>
#include <asm/gart.h>
-#include <asm/amd_iommu_proto.h>
#include <asm/amd_iommu_types.h>
+#include <asm/amd_iommu_proto.h>
#include <asm/amd_iommu.h>
#define CMD_SET_TYPE(cmd, t) ((cmd)->data[1] |= ((t) << 28))
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 8848dda..4a78e22 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -25,8 +25,8 @@
#include <linux/interrupt.h>
#include <linux/msi.h>
#include <asm/pci-direct.h>
-#include <asm/amd_iommu_proto.h>
#include <asm/amd_iommu_types.h>
+#include <asm/amd_iommu_proto.h>
#include <asm/amd_iommu.h>
#include <asm/iommu.h>
#include <asm/gart.h>
@@ -299,9 +299,23 @@ static void iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
/* Function to enable the hardware */
static void iommu_enable(struct amd_iommu *iommu)
{
- printk(KERN_INFO "AMD-Vi: Enabling IOMMU at %s cap 0x%hx\n",
+ static const char * const feat_str[] = {
+ "PreF", "PPR", "X2APIC", "NX", "GT", "[5]",
+ "IA", "GA", "HE", "PC", NULL
+ };
+ int i;
+
+ printk(KERN_INFO "AMD-Vi: Enabling IOMMU at %s cap 0x%hx",
dev_name(&iommu->dev->dev), iommu->cap_ptr);
+ if (iommu->cap & (1 << IOMMU_CAP_EFR)) {
+ printk(KERN_CONT " extended features: ");
+ for (i = 0; feat_str[i]; ++i)
+ if (iommu_feature(iommu, (1ULL << i)))
+ printk(KERN_CONT " %s", feat_str[i]);
+ }
+ printk(KERN_CONT "\n");
+
iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
}
@@ -657,7 +671,7 @@ static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
static void __init init_iommu_from_pci(struct amd_iommu *iommu)
{
int cap_ptr = iommu->cap_ptr;
- u32 range, misc;
+ u32 range, misc, low, high;
int i, j;
pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET,
@@ -673,6 +687,12 @@ static void __init init_iommu_from_pci(struct amd_iommu *iommu)
MMIO_GET_LD(range));
iommu->evt_msi_num = MMIO_MSI_NUM(misc);
+ /* read extended feature bits */
+ low = readl(iommu->mmio_base + MMIO_EXT_FEATURES);
+ high = readl(iommu->mmio_base + MMIO_EXT_FEATURES + 4);
+
+ iommu->features = ((u64)high << 32) | low;
+
if (!is_rd890_iommu(iommu->dev))
return;
--
1.7.1
next prev parent reply other threads:[~2011-04-11 9:32 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-11 9:32 [PATCH 0/2] AMD IOMMU Extended feature base support Joerg Roedel
2011-04-11 9:32 ` Joerg Roedel [this message]
2011-04-11 15:11 ` [PATCH 1/2] x86/amd-iommu: Add extended feature detection Rolf Eike Beer
2011-04-12 6:33 ` Roedel, Joerg
2011-04-11 9:32 ` [PATCH 2/2] x86/amd-iommu: Add support for invalidate_all command Joerg Roedel
2011-04-11 13:57 ` Henrique de Moraes Holschuh
2011-04-11 14:08 ` Roedel, Joerg
-- strict thread matches above, loose matches on Subject: below --
2011-04-12 7:44 [PATCH 0/2] AMD IOMMU Extended feature base support v2 Joerg Roedel
2011-04-12 7:44 ` [PATCH 1/2] x86/amd-iommu: Add extended feature detection Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1302514324-14717-2-git-send-email-joerg.roedel@amd.com \
--to=joerg.roedel@amd.com \
--cc=iommu@lists.linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox