From: Ben Hutchings <bhutchings@solarflare.com>
To: David Hill <david.hill@ubisoft.com>
Cc: "L. Alberto Giménez" <agimenez@sysvalve.es>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"dgiagio@gmail.com" <dgiagio@gmail.com>,
"dborca@yahoo.com" <dborca@yahoo.com>,
"davem@davemloft.net" <davem@davemloft.net>,
"pmcenery@gmail.com" <pmcenery@gmail.com>,
"open list:USB SUBSYSTEM" <linux-usb@vger.kernel.org>,
"open list:NETWORKING DRIVERS" <netdev@vger.kernel.org>
Subject: [PATCH net-next-2.6] ipheth: Properly distinguish length and alignment in URBs and skbs
Date: Tue, 03 May 2011 18:49:25 +0100 [thread overview]
Message-ID: <1304444965.2873.11.camel@bwh-desktop> (raw)
In-Reply-To: <710D4D6CE160654C87478D18385BB9971BE3FDCA46@MDC-MAIL-CMS01.ubisoft.org>
The USB protocol this driver implements appears to require 2 bytes of
padding in front of each received packet. This used to be equal to
the value of NET_IP_ALIGN on x86, so the driver abused that constant
and mostly worked, but this is no longer the case. The driver also
mixed up the URB and packet lengths, resulting in 2 bytes of junk at
the end of the skb.
Introduce a private constant for the 2 bytes of padding; fix this
confusion and check for the under-length case.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
Compile-tested only, as I'm not cool enough for an iPhone either.
This is applicable to net-next-2.6 or v2.6.38.
Ben.
drivers/net/usb/ipheth.c | 14 +++++++++-----
1 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index 7d42f9a..81126ff 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -65,6 +65,7 @@
#define IPHETH_USBINTF_PROTO 1
#define IPHETH_BUF_SIZE 1516
+#define IPHETH_IP_ALIGN 2 /* padding at front of URB */
#define IPHETH_TX_TIMEOUT (5 * HZ)
#define IPHETH_INTFNUM 2
@@ -202,18 +203,21 @@ static void ipheth_rcvbulk_callback(struct urb *urb)
return;
}
- len = urb->actual_length;
- buf = urb->transfer_buffer;
+ if (urb->actual_length <= IPHETH_IP_ALIGN) {
+ dev->net->stats.rx_length_errors++;
+ return;
+ }
+ len = urb->actual_length - IPHETH_IP_ALIGN;
+ buf = urb->transfer_buffer + IPHETH_IP_ALIGN;
- skb = dev_alloc_skb(NET_IP_ALIGN + len);
+ skb = dev_alloc_skb(len);
if (!skb) {
err("%s: dev_alloc_skb: -ENOMEM", __func__);
dev->net->stats.rx_dropped++;
return;
}
- skb_reserve(skb, NET_IP_ALIGN);
- memcpy(skb_put(skb, len), buf + NET_IP_ALIGN, len - NET_IP_ALIGN);
+ memcpy(skb_put(skb, len), buf, len);
skb->dev = dev->net;
skb->protocol = eth_type_trans(skb, dev->net);
--
1.7.4
--
Ben Hutchings, Senior Software Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
next prev parent reply other threads:[~2011-05-03 17:49 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-01 11:00 [PATCH] ipheth.c: Enable IP header alignment L. Alberto Giménez
2011-05-01 15:46 ` Ben Hutchings
2011-05-02 19:35 ` L. Alberto Giménez
2011-05-02 19:46 ` David Miller
2011-05-02 21:12 ` L. Alberto Giménez
2011-05-02 21:04 ` Ben Hutchings
2011-05-03 16:57 ` L. Alberto Giménez
2011-05-03 17:18 ` David Hill
2011-05-03 17:33 ` Paul McEnery
2011-05-03 17:41 ` David Hill
2011-05-03 22:45 ` Paul McEnery
2011-05-03 17:49 ` Ben Hutchings [this message]
2011-05-08 22:46 ` [PATCH net-next-2.6] ipheth: Properly distinguish length and alignment in URBs and skbs David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1304444965.2873.11.camel@bwh-desktop \
--to=bhutchings@solarflare.com \
--cc=agimenez@sysvalve.es \
--cc=davem@davemloft.net \
--cc=david.hill@ubisoft.com \
--cc=dborca@yahoo.com \
--cc=dgiagio@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pmcenery@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox