From: Samuel Ortiz <sameo@linux.intel.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>,
Haojian Zhuang <haojian.zhuang@marvell.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@slimlogic.co.uk>,
Richard Purdie <rpurdie@rpsys.net>
Subject: [PATCH 17/19] mfd: Use mfd cell platform_data for 88pm860x cells platform bits
Date: Mon, 9 May 2011 02:32:09 +0200 [thread overview]
Message-ID: <1304901131-7104-18-git-send-email-sameo@linux.intel.com> (raw)
In-Reply-To: <1304901131-7104-1-git-send-email-sameo@linux.intel.com>
With the addition of a platform device mfd_cell pointer, MFD drivers
can go back to passing platform back to their sub drivers.
This allows for an mfd_cell->mfd_data removal and thus keep the
sub drivers MFD agnostic. This is mostly needed for non MFD aware
sub drivers.
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
drivers/leds/leds-88pm860x.c | 7 +------
drivers/mfd/88pm860x-core.c | 18 ++++++++++++------
drivers/regulator/88pm8607.c | 7 +------
drivers/video/backlight/88pm860x_bl.c | 7 +------
4 files changed, 15 insertions(+), 24 deletions(-)
diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c
index 416def8..0d4c166 100644
--- a/drivers/leds/leds-88pm860x.c
+++ b/drivers/leds/leds-88pm860x.c
@@ -17,7 +17,6 @@
#include <linux/leds.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
-#include <linux/mfd/core.h>
#include <linux/mfd/88pm860x.h>
#define LED_PWM_SHIFT (3)
@@ -171,7 +170,6 @@ static int pm860x_led_probe(struct platform_device *pdev)
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
struct pm860x_led_pdata *pdata;
struct pm860x_led *data;
- struct mfd_cell *cell;
struct resource *res;
int ret;
@@ -181,10 +179,7 @@ static int pm860x_led_probe(struct platform_device *pdev)
return -EINVAL;
}
- cell = pdev->dev.platform_data;
- if (cell == NULL)
- return -ENODEV;
- pdata = cell->mfd_data;
+ pdata = pdev->dev.platform_data;
if (pdata == NULL) {
dev_err(&pdev->dev, "No platform data!\n");
return -EINVAL;
diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
index 011cb6c..801aff7 100644
--- a/drivers/mfd/88pm860x-core.c
+++ b/drivers/mfd/88pm860x-core.c
@@ -516,7 +516,8 @@ static void __devinit device_bk_init(struct pm860x_chip *chip,
for (i = 0; i < pdata->num_backlights; i++) {
memcpy(&bk_pdata[i], &pdata->backlight[i],
sizeof(struct pm860x_backlight_pdata));
- bk_devs[i].mfd_data = &bk_pdata[i];
+ bk_devs[i].platform_data = &bk_pdata[i];
+ bk_devs[i].pdata_size = sizeof(bk_pdata[i]);
for (j = 0; j < ARRAY_SIZE(bk_devs); j++) {
id = bk_resources[j].start;
@@ -553,7 +554,8 @@ static void __devinit device_led_init(struct pm860x_chip *chip,
for (i = 0; i < pdata->num_leds; i++) {
memcpy(&led_pdata[i], &pdata->led[i],
sizeof(struct pm860x_led_pdata));
- led_devs[i].mfd_data = &led_pdata[i];
+ led_devs[i].platform_data = &led_pdata[i];
+ led_devs[i].pdata_size = sizeof(led_pdata[i]);
for (j = 0; j < ARRAY_SIZE(led_devs); j++) {
id = led_resources[j].start;
@@ -617,7 +619,8 @@ static void __devinit device_regulator_init(struct pm860x_chip *chip,
}
memcpy(®ulator_pdata[i], &pdata->regulator[i],
sizeof(struct regulator_init_data));
- regulator_devs[i].mfd_data = ®ulator_pdata[i];
+ regulator_devs[i].platform_data = ®ulator_pdata[i];
+ regulator_devs[i].pdata_size = sizeof(regulator_pdata[i]);
regulator_devs[i].num_resources = 1;
regulator_devs[i].resources = ®ulator_resources[j];
@@ -642,7 +645,8 @@ static void __devinit device_touch_init(struct pm860x_chip *chip,
return;
memcpy(&touch_pdata, pdata->touch, sizeof(struct pm860x_touch_pdata));
- touch_devs[0].mfd_data = &touch_pdata;
+ touch_devs[0].platform_data = &touch_pdata;
+ touch_devs[0].pdata_size = sizeof(touch_pdata);
touch_devs[0].num_resources = ARRAY_SIZE(touch_resources);
touch_devs[0].resources = &touch_resources[0];
ret = mfd_add_devices(chip->dev, 0, &touch_devs[0],
@@ -662,7 +666,8 @@ static void __devinit device_power_init(struct pm860x_chip *chip,
return;
memcpy(&power_pdata, pdata->power, sizeof(struct pm860x_power_pdata));
- power_devs[0].mfd_data = &power_pdata;
+ power_devs[0].platform_data = &power_pdata;
+ power_devs[0].pdata_size = sizeof(power_pdata);
power_devs[0].num_resources = ARRAY_SIZE(battery_resources);
power_devs[0].resources = &battery_resources[0],
ret = mfd_add_devices(chip->dev, 0, &power_devs[0], 1,
@@ -670,7 +675,8 @@ static void __devinit device_power_init(struct pm860x_chip *chip,
if (ret < 0)
dev_err(chip->dev, "Failed to add battery subdev\n");
- power_devs[1].mfd_data = &power_pdata;
+ power_devs[1].platform_data = &power_pdata;
+ power_devs[0].pdata_size = sizeof(power_pdata);
power_devs[1].num_resources = ARRAY_SIZE(charger_resources);
power_devs[1].resources = &charger_resources[0],
ret = mfd_add_devices(chip->dev, 0, &power_devs[1], 1,
diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index 8592512..784ea77 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -15,7 +15,6 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
-#include <linux/mfd/core.h>
#include <linux/mfd/88pm860x.h>
struct pm8607_regulator_info {
@@ -400,13 +399,9 @@ static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
struct pm8607_regulator_info *info = NULL;
struct regulator_init_data *pdata;
- struct mfd_cell *cell;
int i;
- cell = pdev->dev.platform_data;
- if (cell == NULL)
- return -ENODEV;
- pdata = cell->mfd_data;
+ pdata = pdev->dev.platform_data;
if (pdata == NULL)
return -EINVAL;
diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c
index c8b520e..c04b94d 100644
--- a/drivers/video/backlight/88pm860x_bl.c
+++ b/drivers/video/backlight/88pm860x_bl.c
@@ -16,7 +16,6 @@
#include <linux/fb.h>
#include <linux/i2c.h>
#include <linux/backlight.h>
-#include <linux/mfd/core.h>
#include <linux/mfd/88pm860x.h>
#define MAX_BRIGHTNESS (0xFF)
@@ -168,7 +167,6 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
struct pm860x_backlight_pdata *pdata = NULL;
struct pm860x_backlight_data *data;
struct backlight_device *bl;
- struct mfd_cell *cell;
struct resource *res;
struct backlight_properties props;
unsigned char value;
@@ -181,10 +179,7 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
return -EINVAL;
}
- cell = pdev->dev.platform_data;
- if (cell == NULL)
- return -ENODEV;
- pdata = cell->mfd_data;
+ pdata = pdev->dev.platform_data;
if (pdata == NULL) {
dev_err(&pdev->dev, "platform data isn't assigned to "
"backlight\n");
--
1.7.2.3
next prev parent reply other threads:[~2011-05-09 0:33 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1304901131-7104-1-git-send-email-sameo@linux.intel.com>
2011-05-09 0:31 ` [PATCH 02/19] mfd: Use mfd cell platform_data for ab3550 cells platform bits Samuel Ortiz
2011-05-09 7:01 ` Linus Walleij
2011-05-09 0:31 ` [PATCH 03/19] mfd: Use mfd cell platform_data for ab3100 " Samuel Ortiz
2011-05-09 7:02 ` Linus Walleij
2011-05-09 0:31 ` [PATCH 04/19] mmc: Use device platform_data to retrieve tmio_mmc " Samuel Ortiz
2011-05-09 0:31 ` [PATCH 05/19] w1: Use device platform_data to retrieve ds1wm " Samuel Ortiz
2011-05-09 0:31 ` [PATCH 06/19] mfd: Pass htc-pasic3 led platform data through the cell platform_data Samuel Ortiz
2011-05-09 10:20 ` Paul Parsons
2011-05-09 11:25 ` Samuel Ortiz
2011-05-09 0:31 ` [PATCH 07/19] mfd: Use mfd cell platform_data for wl1273 cells platform bits Samuel Ortiz
2011-06-09 8:43 ` Matti J. Aaltonen
2011-05-09 0:32 ` [PATCH 08/19] fb: Use platform_data to retrieve tmiofb " Samuel Ortiz
2011-05-09 0:32 ` [PATCH 09/19] mtd: Use platform_data to retrieve tmio_nand " Samuel Ortiz
2011-05-09 0:32 ` [PATCH 10/19] mfd: Use mfd cell platform_data for timberdale cells " Samuel Ortiz
2011-05-09 0:32 ` [PATCH 11/19] mfd: Use mfd cell platform_data for rdc321x " Samuel Ortiz
2011-05-09 0:32 ` [PATCH 12/19] mfd: Use mfd cell platform_data for wm8400 " Samuel Ortiz
2011-05-09 7:13 ` Mark Brown
2011-05-10 8:45 ` Samuel Ortiz
2011-05-10 9:10 ` Mark Brown
2011-05-11 9:03 ` [PATCH v1 " Samuel Ortiz
2011-05-11 9:20 ` Mark Brown
2011-05-09 0:32 ` [PATCH 13/19] mfd: Use mfd cell platform_data for mc13xxx " Samuel Ortiz
2011-05-09 0:32 ` [PATCH 14/19] mfd: Use mfd cell platform_data for janz " Samuel Ortiz
2011-05-09 0:32 ` [PATCH 15/19] mfd: Use mfd cell platform_data for twl4030 codec " Samuel Ortiz
2011-05-09 0:32 ` [PATCH 16/19] mfd: Use mfd cell platform_data for tps6105x " Samuel Ortiz
2011-05-09 7:05 ` Linus Walleij
2011-05-11 8:23 ` Samuel Ortiz
2011-05-11 19:41 ` Linus Walleij
2011-05-11 9:05 ` [PATCH v1 " Samuel Ortiz
2011-05-09 0:32 ` Samuel Ortiz [this message]
2011-05-09 8:21 ` [PATCH 17/19] mfd: Use mfd cell platform_data for 88pm860x " Haojian Zhuang
2011-05-09 0:32 ` [PATCH 18/19] mfd: Use mfd cell platform_data for davinci " Samuel Ortiz
[not found] ` <1304901131-7104-20-git-send-email-sameo@linux.intel.com>
2011-05-09 8:22 ` [PATCH 19/19] mfd: Remove mfd_data Haojian Zhuang
2011-05-09 11:20 ` [PATCH 00/19] mfd: mfd_data removal Samuel Ortiz
[not found] ` <1304901131-7104-2-git-send-email-sameo@linux.intel.com>
2011-05-09 8:22 ` [PATCH 01/19] mfd: Add platform data pointer back Haojian Zhuang
2011-05-09 11:21 ` Samuel Ortiz
2011-05-10 7:52 ` [PATCH 00/19] mfd: mfd_data removal Richard Röjfors
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1304901131-7104-18-git-send-email-sameo@linux.intel.com \
--to=sameo@linux.intel.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=haojian.zhuang@marvell.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@slimlogic.co.uk \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox