From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org
Cc: Pavan Savoy <pavan_savoy@ti.com>, Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 14/44] drivers:misc:ti-st: handle delayed tty receive
Date: Thu, 19 May 2011 17:10:32 -0700 [thread overview]
Message-ID: <1305850262-9575-14-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <1305850262-9575-1-git-send-email-gregkh@suse.de>
From: Pavan Savoy <pavan_savoy@ti.com>
When certain technologies shutdown their interface without waiting for
the acknowledgement from the chip. The receive_buf from the TTY would be
invoked a while after the relevant technology is unregistered.
This patch introduces a new flag "is_registered" which maintains the
state of protocols BT, FM or GPS and thereby removes the need to clear
the protocol data from ST when protocols gets unregistered.
This fixes corner cases when HCI RESET is sent down from bluetooth stack
and the receive_buf is called from tty after 250ms before which
bluetooth would have unregistered from the system.
OR - when FM application decides to close down the device without
sending a power-off FM command resulting in some RDS data or interrupt
data coming in after the driver is unregistered.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/misc/ti-st/st_core.c | 23 +++++++++++++----------
include/linux/ti_wilink_st.h | 3 ++-
2 files changed, 15 insertions(+), 11 deletions(-)
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index 486117f..f91f82e 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -43,13 +43,15 @@ static void add_channel_to_table(struct st_data_s *st_gdata,
pr_info("%s: id %d\n", __func__, new_proto->chnl_id);
/* list now has the channel id as index itself */
st_gdata->list[new_proto->chnl_id] = new_proto;
+ st_gdata->is_registered[new_proto->chnl_id] = true;
}
static void remove_channel_from_table(struct st_data_s *st_gdata,
struct st_proto_s *proto)
{
pr_info("%s: id %d\n", __func__, proto->chnl_id);
- st_gdata->list[proto->chnl_id] = NULL;
+/* st_gdata->list[proto->chnl_id] = NULL; */
+ st_gdata->is_registered[proto->chnl_id] = false;
}
/*
@@ -104,7 +106,7 @@ void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
if (unlikely
(st_gdata == NULL || st_gdata->rx_skb == NULL
- || st_gdata->list[chnl_id] == NULL)) {
+ || st_gdata->is_registered[chnl_id] == false)) {
pr_err("chnl_id %d not registered, no data to send?",
chnl_id);
kfree_skb(st_gdata->rx_skb);
@@ -141,14 +143,15 @@ void st_reg_complete(struct st_data_s *st_gdata, char err)
unsigned char i = 0;
pr_info(" %s ", __func__);
for (i = 0; i < ST_MAX_CHANNELS; i++) {
- if (likely(st_gdata != NULL && st_gdata->list[i] != NULL &&
- st_gdata->list[i]->reg_complete_cb != NULL)) {
+ if (likely(st_gdata != NULL &&
+ st_gdata->is_registered[i] == true &&
+ st_gdata->list[i]->reg_complete_cb != NULL)) {
st_gdata->list[i]->reg_complete_cb
(st_gdata->list[i]->priv_data, err);
pr_info("protocol %d's cb sent %d\n", i, err);
if (err) { /* cleanup registered protocol */
st_gdata->protos_registered--;
- st_gdata->list[i] = NULL;
+ st_gdata->is_registered[i] = false;
}
}
}
@@ -475,9 +478,9 @@ void kim_st_list_protocols(struct st_data_s *st_gdata, void *buf)
{
seq_printf(buf, "[%d]\nBT=%c\nFM=%c\nGPS=%c\n",
st_gdata->protos_registered,
- st_gdata->list[0x04] != NULL ? 'R' : 'U',
- st_gdata->list[0x08] != NULL ? 'R' : 'U',
- st_gdata->list[0x09] != NULL ? 'R' : 'U');
+ st_gdata->is_registered[0x04] == true ? 'R' : 'U',
+ st_gdata->is_registered[0x08] == true ? 'R' : 'U',
+ st_gdata->is_registered[0x09] == true ? 'R' : 'U');
}
/********************************************************************/
@@ -504,7 +507,7 @@ long st_register(struct st_proto_s *new_proto)
return -EPROTONOSUPPORT;
}
- if (st_gdata->list[new_proto->chnl_id] != NULL) {
+ if (st_gdata->is_registered[new_proto->chnl_id] == true) {
pr_err("chnl_id %d already registered", new_proto->chnl_id);
return -EALREADY;
}
@@ -563,7 +566,7 @@ long st_register(struct st_proto_s *new_proto)
/* check for already registered once more,
* since the above check is old
*/
- if (st_gdata->list[new_proto->chnl_id] != NULL) {
+ if (st_gdata->is_registered[new_proto->chnl_id] == true) {
pr_err(" proto %d already registered ",
new_proto->chnl_id);
return -EALREADY;
diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
index 7071ec5..b004e55 100644
--- a/include/linux/ti_wilink_st.h
+++ b/include/linux/ti_wilink_st.h
@@ -140,12 +140,12 @@ extern long st_unregister(struct st_proto_s *);
*/
struct st_data_s {
unsigned long st_state;
- struct tty_struct *tty;
struct sk_buff *tx_skb;
#define ST_TX_SENDING 1
#define ST_TX_WAKEUP 2
unsigned long tx_state;
struct st_proto_s *list[ST_MAX_CHANNELS];
+ bool is_registered[ST_MAX_CHANNELS];
unsigned long rx_state;
unsigned long rx_count;
struct sk_buff *rx_skb;
@@ -155,6 +155,7 @@ struct st_data_s {
unsigned char protos_registered;
unsigned long ll_state;
void *kim_data;
+ struct tty_struct *tty;
};
/*
--
1.7.4.2
next prev parent reply other threads:[~2011-05-20 0:11 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-20 0:08 [GIT PATCH] driver core merge for .40 Greg KH
2011-05-20 0:10 ` [PATCH 01/44] device: add dev_WARN_ONCE Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 02/44] efivars: memory leak on error in create_efivars_bin_attributes() Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 03/44] efivars: handle errors from register_efivars() Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 04/44] firmware: Fix grammar in sysfs-firmware-dmi doc Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 05/44] drivers: make device_type const Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 06/44] kernel/ksysfs.c: expose file_caps_enabled in sysfs Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 07/44] HOWTO: sync up Documentaion/ja_JP/HOWTO Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 08/44] uio_netx: Add support for netPLC cards Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 09/44] uio: fix finding mm index for vma Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 10/44] uio: fix allocating minor id for uio device Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 11/44] uio: clean uioinfo when uninstall uio driver Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 12/44] printk: /dev/kmsg - properly support writev() to avoid interleaved printk() lines Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 13/44] kmsg: properly support writev to avoid interleaved printk lines fix Greg Kroah-Hartman
2011-05-20 0:10 ` Greg Kroah-Hartman [this message]
2011-05-20 0:10 ` [PATCH 15/44] drivers:misc:ti-st: remove rfkill dependency Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 16/44] driver-core: fix race between device_register and driver_register Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 17/44] drivers/base/core.c: Fixed brace coding style issue Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 18/44] driver core/platform_device_add_data: set platform_data to NULL if !data Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 19/44] driver core/platform_device_add_data: free platform data before overwriting Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 20/44] driver core/platform_device_add_resources: set resource to NULL if !res Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 21/44] driver core/platform_device_add_resources: free resource before overwriting Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 22/44] driver core: let dev_set_drvdata return int instead of void as it can fail Greg Kroah-Hartman
2011-05-20 7:53 ` [22/44] " Milton Miller
2011-05-20 8:01 ` Uwe Kleine-König
2011-05-20 0:10 ` [PATCH 23/44] drivers:base:fix the coding format of memory.c Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 24/44] Add a strtobool function matching semantics of existing in kernel equivalents Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 25/44] debugfs: move to new strtobool Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 26/44] params.c: Use new strtobool function to process boolean inputs Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 27/44] misc: fix ti-st build issues Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 28/44] x86: get_bios_ebda_length() Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 29/44] x86: Better comments for get_bios_ebda() Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 30/44] driver: Google EFI SMI Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 31/44] driver: Google Memory Console Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 32/44] Introduce CONFIG_GOOGLE_FIRMWARE Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 33/44] Allow setting of number of raw devices as a module parameter Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 34/44] efivars: prevent oops on unload when efi is not enabled Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 35/44] reboot: disable usermodehelper to prevent fs access Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 36/44] RAW driver: Remove call to kobject_put() Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 37/44] Translated Documentation/email-clients.txt Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 38/44] driver core: Add the device driver-model structures to kerneldoc Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 39/44] driver core: remove the driver-model structures from the documentation Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 40/44] SYSFS: Fix erroneous comments for sysfs_update_group() Greg Kroah-Hartman
2011-05-20 0:10 ` [PATCH 41/44] memory hotplug: Speed up add/remove when blocks are larger than PAGES_PER_SECTION Greg Kroah-Hartman
2011-05-20 0:11 ` [PATCH 42/44] drivers/base/memory.c: fix warning due to "memory hotplug: Speed up add/remove when blocks are larger than PAGES_PER_SECTION" Greg Kroah-Hartman
2011-05-20 0:11 ` [PATCH 43/44] sysfs: remove "last sysfs file:" line from the oops messages Greg Kroah-Hartman
2011-05-20 0:11 ` [PATCH 44/44] debugfs: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1305850262-9575-14-git-send-email-gregkh@suse.de \
--to=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=pavan_savoy@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox