From: Artem Bityutskiy <dedekind1@gmail.com>
To: Ben Gardiner <bengardiner@nanometrics.ca>
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
"Matthew L. Creech" <mlcreech@gmail.com>
Subject: Re: [PATCH 2/3] UBIFS: intialize the LPT earlier
Date: Wed, 01 Jun 2011 13:06:50 +0300 [thread overview]
Message-ID: <1306922810.4405.91.camel@localhost> (raw)
In-Reply-To: <e0fb2d40ab7314049654d85b86a4c27e9a1801ef.1306780983.git.bengardiner@nanometrics.ca>
Hi,
thanks for the patch, however
On Mon, 2011-05-30 at 14:56 -0400, Ben Gardiner wrote:
> + err = ubifs_lpt_init(c, 1, !c->ro_mount);
> + if (err)
> + goto out_lpt;
You cannot call ubifs_lpt_init()
> +
> if ((c->mst_node->flags & cpu_to_le32(UBIFS_MST_DIRTY)) != 0) {
> ubifs_msg("recovery needed");
> c->need_recovery = 1;
> if (!c->ro_mount) {
> err = ubifs_recover_inl_heads(c, c->sbuf);
Before ubifs_recover_inl_heads() is called in case of dirty FS.
I've massaged your patch and pushed the following analogous patch to the
ubifs tree, please check/test:
>From 678ef9ad3daa453723f04f84f9db6a22994e7343 Mon Sep 17 00:00:00 2001
From: Ben Gardiner <bengardiner@nanometrics.ca>
Date: Mon, 30 May 2011 14:56:15 -0400
Subject: [PATCH] UBIFS: intialize LPT earlier
The current 'mount_ubifs()' implementation does not initialize the LPT until the
the master node is marked dirty. Move the LPT initialization to before marking
the master node dirty. This is a preparation for the next patch which will move
the free-space-fixup check to before marking the master node dirty, because we
have to fix-up the free space before doing any writes.
Artem: massaged the patch and commit message.
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
fs/ubifs/super.c | 29 ++++++++++++++++-------------
1 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 1e40db7..6d357fd 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1282,17 +1282,24 @@ static int mount_ubifs(struct ubifs_info *c)
if (err)
goto out_master;
- init_constants_master(c);
-
if ((c->mst_node->flags & cpu_to_le32(UBIFS_MST_DIRTY)) != 0) {
ubifs_msg("recovery needed");
c->need_recovery = 1;
- if (!c->ro_mount) {
- err = ubifs_recover_inl_heads(c, c->sbuf);
- if (err)
- goto out_master;
- }
- } else if (!c->ro_mount) {
+ }
+
+ init_constants_master(c);
+
+ if (c->need_recovery && !c->ro_mount) {
+ err = ubifs_recover_inl_heads(c, c->sbuf);
+ if (err)
+ goto out_master;
+ }
+
+ err = ubifs_lpt_init(c, 1, !c->ro_mount);
+ if (err)
+ goto out_master;
+
+ if (!c->ro_mount) {
/*
* Set the "dirty" flag so that if we reboot uncleanly we
* will notice this immediately on the next mount.
@@ -1300,13 +1307,9 @@ static int mount_ubifs(struct ubifs_info *c)
c->mst_node->flags |= cpu_to_le32(UBIFS_MST_DIRTY);
err = ubifs_write_master(c);
if (err)
- goto out_master;
+ goto out_lpt;
}
- err = ubifs_lpt_init(c, 1, !c->ro_mount);
- if (err)
- goto out_lpt;
-
err = dbg_check_idx_size(c, c->bi.old_idx_sz);
if (err)
goto out_lpt;
--
1.7.2.3
--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)
next prev parent reply other threads:[~2011-06-01 10:11 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-30 18:56 [PATCH 0/3] fix-up free space earlier in mount_ubifs() Ben Gardiner
2011-05-30 18:56 ` [PATCH 1/3] UBIFS: assert no fixup when writing a node Ben Gardiner
2011-06-01 10:03 ` Artem Bityutskiy
2011-05-30 18:56 ` [PATCH 2/3] UBIFS: intialize the LPT earlier Ben Gardiner
2011-06-01 10:06 ` Artem Bityutskiy [this message]
2011-05-30 18:56 ` [PATCH 3/3] UBIFS: fix-up free space earlier Ben Gardiner
2011-06-01 10:16 ` Artem Bityutskiy
2011-06-01 14:53 ` [PATCH] UBIFS: fixup merged 'UBIFS: fix-up free space earlier' Ben Gardiner
2011-06-01 15:03 ` Artem Bityutskiy
2011-06-01 15:14 ` Artem Bityutskiy
2011-06-01 15:28 ` Ben Gardiner
2011-05-31 14:43 ` [PATCH 0/3] fix-up free space earlier in mount_ubifs() Matthew L. Creech
2011-05-31 14:52 ` Ben Gardiner
2011-05-31 15:22 ` Matthew L. Creech
2011-06-01 10:20 ` Artem Bityutskiy
2011-05-31 15:37 ` Ben Gardiner
2011-06-01 10:19 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306922810.4405.91.camel@localhost \
--to=dedekind1@gmail.com \
--cc=bengardiner@nanometrics.ca \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=mlcreech@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox