From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@linux.intel.com>
Cc: linux-kernel@vger.kernel.org,
Stephen Rothwell <sfr@canb.auug.org.au>,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH] mfd: Add WM831x clock control register definitions
Date: Tue, 21 Jun 2011 11:12:23 +0100 [thread overview]
Message-ID: <1308651143-23450-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <20110621130331.368aaf74.sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
include/linux/mfd/wm831x/core.h | 101 +++++++++++++++++++++++++++++++++++++++
1 files changed, 101 insertions(+), 0 deletions(-)
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index ebead1c..1d93cbe 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -234,6 +234,107 @@
#define WM831X_ON_PIN_TO_SHIFT 0 /* ON_PIN_TO - [1:0] */
#define WM831X_ON_PIN_TO_WIDTH 2 /* ON_PIN_TO - [1:0] */
+/*
+ * R16528 (0x4090) - Clock Control 1
+ */
+#define WM831X_CLKOUT_ENA 0x8000 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_ENA_MASK 0x8000 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_ENA_SHIFT 15 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_ENA_WIDTH 1 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_OD 0x2000 /* CLKOUT_OD */
+#define WM831X_CLKOUT_OD_MASK 0x2000 /* CLKOUT_OD */
+#define WM831X_CLKOUT_OD_SHIFT 13 /* CLKOUT_OD */
+#define WM831X_CLKOUT_OD_WIDTH 1 /* CLKOUT_OD */
+#define WM831X_CLKOUT_SLOT_MASK 0x0700 /* CLKOUT_SLOT - [10:8] */
+#define WM831X_CLKOUT_SLOT_SHIFT 8 /* CLKOUT_SLOT - [10:8] */
+#define WM831X_CLKOUT_SLOT_WIDTH 3 /* CLKOUT_SLOT - [10:8] */
+#define WM831X_CLKOUT_SLPSLOT_MASK 0x0070 /* CLKOUT_SLPSLOT - [6:4] */
+#define WM831X_CLKOUT_SLPSLOT_SHIFT 4 /* CLKOUT_SLPSLOT - [6:4] */
+#define WM831X_CLKOUT_SLPSLOT_WIDTH 3 /* CLKOUT_SLPSLOT - [6:4] */
+#define WM831X_CLKOUT_SRC 0x0001 /* CLKOUT_SRC */
+#define WM831X_CLKOUT_SRC_MASK 0x0001 /* CLKOUT_SRC */
+#define WM831X_CLKOUT_SRC_SHIFT 0 /* CLKOUT_SRC */
+#define WM831X_CLKOUT_SRC_WIDTH 1 /* CLKOUT_SRC */
+
+/*
+ * R16529 (0x4091) - Clock Control 2
+ */
+#define WM831X_XTAL_INH 0x8000 /* XTAL_INH */
+#define WM831X_XTAL_INH_MASK 0x8000 /* XTAL_INH */
+#define WM831X_XTAL_INH_SHIFT 15 /* XTAL_INH */
+#define WM831X_XTAL_INH_WIDTH 1 /* XTAL_INH */
+#define WM831X_XTAL_ENA 0x2000 /* XTAL_ENA */
+#define WM831X_XTAL_ENA_MASK 0x2000 /* XTAL_ENA */
+#define WM831X_XTAL_ENA_SHIFT 13 /* XTAL_ENA */
+#define WM831X_XTAL_ENA_WIDTH 1 /* XTAL_ENA */
+#define WM831X_XTAL_BKUPENA 0x1000 /* XTAL_BKUPENA */
+#define WM831X_XTAL_BKUPENA_MASK 0x1000 /* XTAL_BKUPENA */
+#define WM831X_XTAL_BKUPENA_SHIFT 12 /* XTAL_BKUPENA */
+#define WM831X_XTAL_BKUPENA_WIDTH 1 /* XTAL_BKUPENA */
+#define WM831X_FLL_AUTO 0x0080 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_MASK 0x0080 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_SHIFT 7 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_WIDTH 1 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_FREQ_MASK 0x0007 /* FLL_AUTO_FREQ - [2:0] */
+#define WM831X_FLL_AUTO_FREQ_SHIFT 0 /* FLL_AUTO_FREQ - [2:0] */
+#define WM831X_FLL_AUTO_FREQ_WIDTH 3 /* FLL_AUTO_FREQ - [2:0] */
+
+/*
+ * R16530 (0x4092) - FLL Control 1
+ */
+#define WM831X_FLL_FRAC 0x0004 /* FLL_FRAC */
+#define WM831X_FLL_FRAC_MASK 0x0004 /* FLL_FRAC */
+#define WM831X_FLL_FRAC_SHIFT 2 /* FLL_FRAC */
+#define WM831X_FLL_FRAC_WIDTH 1 /* FLL_FRAC */
+#define WM831X_FLL_OSC_ENA 0x0002 /* FLL_OSC_ENA */
+#define WM831X_FLL_OSC_ENA_MASK 0x0002 /* FLL_OSC_ENA */
+#define WM831X_FLL_OSC_ENA_SHIFT 1 /* FLL_OSC_ENA */
+#define WM831X_FLL_OSC_ENA_WIDTH 1 /* FLL_OSC_ENA */
+#define WM831X_FLL_ENA 0x0001 /* FLL_ENA */
+#define WM831X_FLL_ENA_MASK 0x0001 /* FLL_ENA */
+#define WM831X_FLL_ENA_SHIFT 0 /* FLL_ENA */
+#define WM831X_FLL_ENA_WIDTH 1 /* FLL_ENA */
+
+/*
+ * R16531 (0x4093) - FLL Control 2
+ */
+#define WM831X_FLL_OUTDIV_MASK 0x3F00 /* FLL_OUTDIV - [13:8] */
+#define WM831X_FLL_OUTDIV_SHIFT 8 /* FLL_OUTDIV - [13:8] */
+#define WM831X_FLL_OUTDIV_WIDTH 6 /* FLL_OUTDIV - [13:8] */
+#define WM831X_FLL_CTRL_RATE_MASK 0x0070 /* FLL_CTRL_RATE - [6:4] */
+#define WM831X_FLL_CTRL_RATE_SHIFT 4 /* FLL_CTRL_RATE - [6:4] */
+#define WM831X_FLL_CTRL_RATE_WIDTH 3 /* FLL_CTRL_RATE - [6:4] */
+#define WM831X_FLL_FRATIO_MASK 0x0007 /* FLL_FRATIO - [2:0] */
+#define WM831X_FLL_FRATIO_SHIFT 0 /* FLL_FRATIO - [2:0] */
+#define WM831X_FLL_FRATIO_WIDTH 3 /* FLL_FRATIO - [2:0] */
+
+/*
+ * R16532 (0x4094) - FLL Control 3
+ */
+#define WM831X_FLL_K_MASK 0xFFFF /* FLL_K - [15:0] */
+#define WM831X_FLL_K_SHIFT 0 /* FLL_K - [15:0] */
+#define WM831X_FLL_K_WIDTH 16 /* FLL_K - [15:0] */
+
+/*
+ * R16533 (0x4095) - FLL Control 4
+ */
+#define WM831X_FLL_N_MASK 0x7FE0 /* FLL_N - [14:5] */
+#define WM831X_FLL_N_SHIFT 5 /* FLL_N - [14:5] */
+#define WM831X_FLL_N_WIDTH 10 /* FLL_N - [14:5] */
+#define WM831X_FLL_GAIN_MASK 0x000F /* FLL_GAIN - [3:0] */
+#define WM831X_FLL_GAIN_SHIFT 0 /* FLL_GAIN - [3:0] */
+#define WM831X_FLL_GAIN_WIDTH 4 /* FLL_GAIN - [3:0] */
+
+/*
+ * R16534 (0x4096) - FLL Control 5
+ */
+#define WM831X_FLL_CLK_REF_DIV_MASK 0x0018 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM831X_FLL_CLK_REF_DIV_SHIFT 3 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM831X_FLL_CLK_REF_DIV_WIDTH 2 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM831X_FLL_CLK_SRC_MASK 0x0003 /* FLL_CLK_SRC - [1:0] */
+#define WM831X_FLL_CLK_SRC_SHIFT 0 /* FLL_CLK_SRC - [1:0] */
+#define WM831X_FLL_CLK_SRC_WIDTH 2 /* FLL_CLK_SRC - [1:0] */
+
struct regulator_dev;
#define WM831X_NUM_IRQ_REGS 5
--
1.7.5.4
next prev parent reply other threads:[~2011-06-21 10:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-21 3:03 linux-next: build failure after merge of the mfd tree Stephen Rothwell
2011-06-21 10:07 ` Mark Brown
2011-06-21 10:12 ` Mark Brown [this message]
2011-06-21 17:58 ` Samuel Ortiz
-- strict thread matches above, loose matches on Subject: below --
2011-06-01 14:16 [PATCH] mfd: Add WM831x clock control register definitions Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1308651143-23450-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox