[PATCH 2/3] mfd: Provide regmap register readback info from wm831x driver

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@linux.intel.com>
Cc: linux-kernel@vger.kernel.org,
	patches@opensource.wolfsonmicro.com,
	Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 2/3] mfd: Provide regmap register readback info from wm831x driver
Date: Sat,  6 Aug 2011 12:58:54 +0900	[thread overview]
Message-ID: <1312603135-21590-2-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1312603135-21590-1-git-send-email-broonie@opensource.wolfsonmicro.com>

Lets us see the register map in debugfs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/mfd/wm831x-core.c |  182 +++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 182 insertions(+), 0 deletions(-)

diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 578e0c2..dbc0520 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -161,6 +161,185 @@ int wm831x_reg_unlock(struct wm831x *wm831x)
 }
 EXPORT_SYMBOL_GPL(wm831x_reg_unlock);
 
+static bool wm831x_reg_readable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case WM831X_RESET_ID:
+	case WM831X_REVISION:
+	case WM831X_PARENT_ID:
+	case WM831X_SYSVDD_CONTROL:
+	case WM831X_THERMAL_MONITORING:
+	case WM831X_POWER_STATE:
+	case WM831X_WATCHDOG:
+	case WM831X_ON_PIN_CONTROL:
+	case WM831X_RESET_CONTROL:
+	case WM831X_CONTROL_INTERFACE:
+	case WM831X_SECURITY_KEY:
+	case WM831X_SOFTWARE_SCRATCH:
+	case WM831X_OTP_CONTROL:
+	case WM831X_GPIO_LEVEL:
+	case WM831X_SYSTEM_STATUS:
+	case WM831X_ON_SOURCE:
+	case WM831X_OFF_SOURCE:
+	case WM831X_SYSTEM_INTERRUPTS:
+	case WM831X_INTERRUPT_STATUS_1:
+	case WM831X_INTERRUPT_STATUS_2:
+	case WM831X_INTERRUPT_STATUS_3:
+	case WM831X_INTERRUPT_STATUS_4:
+	case WM831X_INTERRUPT_STATUS_5:
+	case WM831X_IRQ_CONFIG:
+	case WM831X_SYSTEM_INTERRUPTS_MASK:
+	case WM831X_INTERRUPT_STATUS_1_MASK:
+	case WM831X_INTERRUPT_STATUS_2_MASK:
+	case WM831X_INTERRUPT_STATUS_3_MASK:
+	case WM831X_INTERRUPT_STATUS_4_MASK:
+	case WM831X_INTERRUPT_STATUS_5_MASK:
+	case WM831X_RTC_WRITE_COUNTER:
+	case WM831X_RTC_TIME_1:
+	case WM831X_RTC_TIME_2:
+	case WM831X_RTC_ALARM_1:
+	case WM831X_RTC_ALARM_2:
+	case WM831X_RTC_CONTROL:
+	case WM831X_RTC_TRIM:
+	case WM831X_TOUCH_CONTROL_1:
+	case WM831X_TOUCH_CONTROL_2:
+	case WM831X_TOUCH_DATA_X:
+	case WM831X_TOUCH_DATA_Y:
+	case WM831X_TOUCH_DATA_Z:
+	case WM831X_AUXADC_DATA:
+	case WM831X_AUXADC_CONTROL:
+	case WM831X_AUXADC_SOURCE:
+	case WM831X_COMPARATOR_CONTROL:
+	case WM831X_COMPARATOR_1:
+	case WM831X_COMPARATOR_2:
+	case WM831X_COMPARATOR_3:
+	case WM831X_COMPARATOR_4:
+	case WM831X_GPIO1_CONTROL:
+	case WM831X_GPIO2_CONTROL:
+	case WM831X_GPIO3_CONTROL:
+	case WM831X_GPIO4_CONTROL:
+	case WM831X_GPIO5_CONTROL:
+	case WM831X_GPIO6_CONTROL:
+	case WM831X_GPIO7_CONTROL:
+	case WM831X_GPIO8_CONTROL:
+	case WM831X_GPIO9_CONTROL:
+	case WM831X_GPIO10_CONTROL:
+	case WM831X_GPIO11_CONTROL:
+	case WM831X_GPIO12_CONTROL:
+	case WM831X_GPIO13_CONTROL:
+	case WM831X_GPIO14_CONTROL:
+	case WM831X_GPIO15_CONTROL:
+	case WM831X_GPIO16_CONTROL:
+	case WM831X_CHARGER_CONTROL_1:
+	case WM831X_CHARGER_CONTROL_2:
+	case WM831X_CHARGER_STATUS:
+	case WM831X_BACKUP_CHARGER_CONTROL:
+	case WM831X_STATUS_LED_1:
+	case WM831X_STATUS_LED_2:
+	case WM831X_CURRENT_SINK_1:
+	case WM831X_CURRENT_SINK_2:
+	case WM831X_DCDC_ENABLE:
+	case WM831X_LDO_ENABLE:
+	case WM831X_DCDC_STATUS:
+	case WM831X_LDO_STATUS:
+	case WM831X_DCDC_UV_STATUS:
+	case WM831X_LDO_UV_STATUS:
+	case WM831X_DC1_CONTROL_1:
+	case WM831X_DC1_CONTROL_2:
+	case WM831X_DC1_ON_CONFIG:
+	case WM831X_DC1_SLEEP_CONTROL:
+	case WM831X_DC1_DVS_CONTROL:
+	case WM831X_DC2_CONTROL_1:
+	case WM831X_DC2_CONTROL_2:
+	case WM831X_DC2_ON_CONFIG:
+	case WM831X_DC2_SLEEP_CONTROL:
+	case WM831X_DC2_DVS_CONTROL:
+	case WM831X_DC3_CONTROL_1:
+	case WM831X_DC3_CONTROL_2:
+	case WM831X_DC3_ON_CONFIG:
+	case WM831X_DC3_SLEEP_CONTROL:
+	case WM831X_DC4_CONTROL:
+	case WM831X_DC4_SLEEP_CONTROL:
+	case WM831X_EPE1_CONTROL:
+	case WM831X_EPE2_CONTROL:
+	case WM831X_LDO1_CONTROL:
+	case WM831X_LDO1_ON_CONTROL:
+	case WM831X_LDO1_SLEEP_CONTROL:
+	case WM831X_LDO2_CONTROL:
+	case WM831X_LDO2_ON_CONTROL:
+	case WM831X_LDO2_SLEEP_CONTROL:
+	case WM831X_LDO3_CONTROL:
+	case WM831X_LDO3_ON_CONTROL:
+	case WM831X_LDO3_SLEEP_CONTROL:
+	case WM831X_LDO4_CONTROL:
+	case WM831X_LDO4_ON_CONTROL:
+	case WM831X_LDO4_SLEEP_CONTROL:
+	case WM831X_LDO5_CONTROL:
+	case WM831X_LDO5_ON_CONTROL:
+	case WM831X_LDO5_SLEEP_CONTROL:
+	case WM831X_LDO6_CONTROL:
+	case WM831X_LDO6_ON_CONTROL:
+	case WM831X_LDO6_SLEEP_CONTROL:
+	case WM831X_LDO7_CONTROL:
+	case WM831X_LDO7_ON_CONTROL:
+	case WM831X_LDO7_SLEEP_CONTROL:
+	case WM831X_LDO8_CONTROL:
+	case WM831X_LDO8_ON_CONTROL:
+	case WM831X_LDO8_SLEEP_CONTROL:
+	case WM831X_LDO9_CONTROL:
+	case WM831X_LDO9_ON_CONTROL:
+	case WM831X_LDO9_SLEEP_CONTROL:
+	case WM831X_LDO10_CONTROL:
+	case WM831X_LDO10_ON_CONTROL:
+	case WM831X_LDO10_SLEEP_CONTROL:
+	case WM831X_LDO11_ON_CONTROL:
+	case WM831X_LDO11_SLEEP_CONTROL:
+	case WM831X_POWER_GOOD_SOURCE_1:
+	case WM831X_POWER_GOOD_SOURCE_2:
+	case WM831X_CLOCK_CONTROL_1:
+	case WM831X_CLOCK_CONTROL_2:
+	case WM831X_FLL_CONTROL_1:
+	case WM831X_FLL_CONTROL_2:
+	case WM831X_FLL_CONTROL_3:
+	case WM831X_FLL_CONTROL_4:
+	case WM831X_FLL_CONTROL_5:
+	case WM831X_UNIQUE_ID_1:
+	case WM831X_UNIQUE_ID_2:
+	case WM831X_UNIQUE_ID_3:
+	case WM831X_UNIQUE_ID_4:
+	case WM831X_UNIQUE_ID_5:
+	case WM831X_UNIQUE_ID_6:
+	case WM831X_UNIQUE_ID_7:
+	case WM831X_UNIQUE_ID_8:
+	case WM831X_FACTORY_OTP_ID:
+	case WM831X_FACTORY_OTP_1:
+	case WM831X_FACTORY_OTP_2:
+	case WM831X_FACTORY_OTP_3:
+	case WM831X_FACTORY_OTP_4:
+	case WM831X_FACTORY_OTP_5:
+	case WM831X_CUSTOMER_OTP_ID:
+	case WM831X_DC1_OTP_CONTROL:
+	case WM831X_DC2_OTP_CONTROL:
+	case WM831X_DC3_OTP_CONTROL:
+	case WM831X_LDO1_2_OTP_CONTROL:
+	case WM831X_LDO3_4_OTP_CONTROL:
+	case WM831X_LDO5_6_OTP_CONTROL:
+	case WM831X_LDO7_8_OTP_CONTROL:
+	case WM831X_LDO9_10_OTP_CONTROL:
+	case WM831X_LDO11_EPE_CONTROL:
+	case WM831X_GPIO1_OTP_CONTROL:
+	case WM831X_GPIO2_OTP_CONTROL:
+	case WM831X_GPIO3_OTP_CONTROL:
+	case WM831X_GPIO4_OTP_CONTROL:
+	case WM831X_GPIO5_OTP_CONTROL:
+	case WM831X_GPIO6_OTP_CONTROL:
+	case WM831X_DBE_CHECK_DATA:
+		return true;
+	default:
+		return false;
+	}
+}
+
 /**
  * wm831x_reg_read: Read a single WM831x register.
  *
@@ -1254,6 +1433,9 @@ static struct mfd_cell backlight_devs[] = {
 struct regmap_config wm831x_regmap_config = {
 	.reg_bits = 16,
 	.val_bits = 16,
+
+	.max_register = WM831X_DBE_CHECK_DATA,
+	.readable_reg = wm831x_reg_readable,
 };
 EXPORT_SYMBOL_GPL(wm831x_regmap_config);
 
-- 
1.7.5.4

next prev parent reply	other threads:[~2011-08-06  3:59 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-06  3:58 [PATCH 0/3] Add regmap support for WM831x and WM8994 Mark Brown
2011-08-06  3:58 ` [PATCH 1/3] mfd: Convert WM831x to use regmap API Mark Brown
2011-08-06  3:58   ` Mark Brown [this message]
2011-08-06  3:58   ` [PATCH 3/3] mfd: Convert WM8994 to use new register map API Mark Brown
2011-08-22  9:05 ` [PATCH 0/3] Add regmap support for WM831x and WM8994 Samuel Ortiz

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:578e0c2 dfblob:dbc0520 )
 OR (
bs:"[PATCH 2/3] mfd: Provide regmap register readback info from wm831x driver" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1312603135-21590-2-git-send-email-broonie@opensource.wolfsonmicro.com \
    --to=broonie@opensource.wolfsonmicro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox