Re: [PATCH] [NET] dmfe : number of fixes and features

Levitsky Maxim
2007-02-07T17:59:04Z

Subject: [PATCH] [NET] [001] dmfe : trivial/spelling fixes

Fix a typo, and wrap lines on 80-th column

Signed-off-by: Maxim Levitsky <maximlevitsky@yahoo.com>

---

--- linux-2.6.20-org/drivers/net/tulip/dmfe.c 2007-02-03 11:47:52.000000000 +0200
+++ linux-2.6.20-mod/drivers/net/tulip/dmfe.c 2007-02-07 14:41:29.000000000 +0200
@@ -143,9 +145,13 @@
#define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */
#define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */

-#define DMFE_DBUG(dbug_now, msg, value) if (dmfe_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ":
%s %lx\n", (msg), (long) (value))
+#define DMFE_DBUG(dbug_now, msg, value) if (dmfe_debug || (dbug_now)) \
+ printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))

-#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode
& 1 ?"100":"10", mode & 4 ? "full":"half");
+#define SHOW_MEDIA_TYPE(mode) \
+ printk(KERN_ERR DRV_NAME ": \
+ Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", \
+ mode & 4 ? "full":"half");

/* CR9 definition: SROM/MII */
@@ -163,10 +169,17 @@

#define SROM_V41_CODE 0x14

-#define SROM_CLK_WRITE(data, ioaddr)
outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);
+#define SROM_CLK_WRITE(data, ioaddr) \
+ outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);\
+ outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr);udelay(5);\
+ outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);
+
+#define __CHK_IO_SIZE(pci_id, dev_rev) \
+ ( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? \
+ DM9102A_IO_SIZE: DM9102_IO_SIZE

-#define __CHK_IO_SIZE(pci_id, dev_rev) ( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) )
? DM9102A_IO_SIZE: DM9102_IO_SIZE
-#define CHK_IO_SIZE(pci_dev, dev_rev) __CHK_IO_SIZE(((pci_dev)->device << 16) |
(pci_dev)->vendor, dev_rev)
+#define CHK_IO_SIZE(pci_dev, dev_rev) \
+ __CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev)

/* Sten Check */
#define DEVICE net_device
@@ -329,7 +342,7 @@ static void dmfe_program_DM9802(struct d
static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * );
static void dmfe_set_phyxcer(struct dmfe_board_info *);

-/* DM910X network baord routine ---------------------------- */
+/* DM910X network board routine ---------------------------- */

/*
* Search DM910X board ,allocate space and register it
@@ -402,8 +415,11 @@ static int __devinit dmfe_init_one (stru
db->dev = dev;

/* Allocate Tx/Rx descriptor memory */
- db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
&db->desc_pool_dma_ptr);
- db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
&db->buf_pool_dma_ptr);
+ db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc)
+ * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
+
+ db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC
+ * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);

db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
db->first_tx_desc_dma = db->desc_pool_dma_ptr;
@@ -440,7 +457,8 @@ static int __devinit dmfe_init_one (stru

/* read 64 word srom data */
for (i = 0; i < 64; i++)
- ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i));
+ ((u16 *) db->srom)[i] =
+ cpu_to_le16(read_srom_word(db->ioaddr, i));

/* Set Node address */
for (i = 0; i < 6; i++)
@@ -722,7 +742,8 @@ static int dmfe_stop(struct DEVICE *dev)

#if 0
/* show statistic counter */
- printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx
TT:%lx\n",
+ printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx
+ RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
db->tx_fifo_underrun, db->tx_excessive_collision,
db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
@@ -919,7 +940,8 @@ static void dmfe_rx_packet(struct DEVICE
db->rx_avail_cnt--;
db->interval_rx_cnt++;

- pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
+ pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2),
+ RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
if ( (rdes0 & 0x300) != 0x300) {
/* A packet without First/Last flag */
/* reuse this SKB */
@@ -1259,7 +1334,8 @@ static void dmfe_reuse_skb(struct dmfe_b

if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
rxptr->rx_skb_ptr = skb;
- rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data, RX_ALLOC_SIZE,
PCI_DMA_FROMDEVICE) );
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data,
+ RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
wmb();
rxptr->rdes0 = cpu_to_le32(0x80000000);
db->rx_avail_cnt++;
@@ -1470,7 +1546,8 @@ static void allocate_rx_buffer(struct dm
if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
break;
rxptr->rx_skb_ptr = skb; /* FIXME (?) */
- rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data, RX_ALLOC_SIZE,
PCI_DMA_FROMDEVICE) );
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data,
+ RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
wmb();
rxptr->rdes0 = cpu_to_le32(0x80000000);
rxptr = rxptr->next_rx_desc;
@@ -1663,7 +1740,8 @@ static void dmfe_process_mode(struct dmf
* Write a word to Phy register
*/

-static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id)
+static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
+ u16 phy_data, u32 chip_id)
{
u16 i;
unsigned long ioaddr;

____________________________________________________________________________________
Now that's room service! Choose from over 150,000 hotels
in 45,000 destinations on Yahoo! Travel to find your fit.