From: David Brown <davidb@codeaurora.org>
To: David Brown <davidb@codeaurora.org>,
Daniel Walker <dwalker@fifo99.com>,
Bryan Huntsman <bryanh@codeaurora.org>
Cc: Sahitya Tummala <stummala@codeaurora.org>,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Murali Palnati <palnatim@codeaurora.org>
Subject: [PATCH 4/6] mmc: msm_sdcc: Use MCI_INT_MASK0 for PIO interrupts
Date: Tue, 23 Aug 2011 10:39:16 -0700 [thread overview]
Message-ID: <1314121158-3319-5-git-send-email-davidb@codeaurora.org> (raw)
In-Reply-To: <1314121158-3319-1-git-send-email-davidb@codeaurora.org>
From: Sahitya Tummala <stummala@codeaurora.org>
Not all targets have IRQ1 line routed from the SD controller to
the processor. So we cannot rely on IRQ1 for PIO interrupts.
This patch moves all PIO interrupts to IRQ0 and enables the PIO
mode.
Signed-off-by: Murali Palnati <palnatim@codeaurora.org>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
---
drivers/mmc/host/msm_sdcc.c | 20 ++++++++++++++++----
drivers/mmc/host/msm_sdcc.h | 5 +++++
2 files changed, 21 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
index 1f1eff9..c405e93 100644
--- a/drivers/mmc/host/msm_sdcc.c
+++ b/drivers/mmc/host/msm_sdcc.c
@@ -213,7 +213,8 @@ msmsdcc_dma_exec_func(struct msm_dmov_cmd *cmd)
msmsdcc_writel(host, host->cmd_timeout, MMCIDATATIMER);
msmsdcc_writel(host, (unsigned int)host->curr.xfer_size,
MMCIDATALENGTH);
- msmsdcc_writel(host, host->cmd_pio_irqmask, MMCIMASK1);
+ msmsdcc_writel(host, (msmsdcc_readl(host, MMCIMASK0) &
+ (~MCI_IRQ_PIO)) | host->cmd_pio_irqmask, MMCIMASK0);
msmsdcc_writel(host, host->cmd_datactrl, MMCIDATACTRL);
if (host->cmd_cmd) {
@@ -543,7 +544,9 @@ msmsdcc_start_data(struct msmsdcc_host *host, struct mmc_data *data,
msmsdcc_writel(host, host->curr.xfer_size, MMCIDATALENGTH);
- msmsdcc_writel(host, pio_irqmask, MMCIMASK1);
+ msmsdcc_writel(host, (msmsdcc_readl(host, MMCIMASK0) &
+ (~MCI_IRQ_PIO)) | pio_irqmask, MMCIMASK0);
+
msmsdcc_writel(host, datactrl, MMCIDATACTRL);
if (cmd) {
@@ -659,8 +662,13 @@ msmsdcc_pio_irq(int irq, void *dev_id)
{
struct msmsdcc_host *host = dev_id;
uint32_t status;
+ u32 mci_mask0;
status = msmsdcc_readl(host, MMCISTATUS);
+ mci_mask0 = msmsdcc_readl(host, MMCIMASK0);
+
+ if (((mci_mask0 & status) & MCI_IRQ_PIO) == 0)
+ return IRQ_NONE;
do {
unsigned long flags;
@@ -719,10 +727,12 @@ msmsdcc_pio_irq(int irq, void *dev_id)
} while (1);
if (status & MCI_RXACTIVE && host->curr.xfer_remain < MCI_FIFOSIZE)
- msmsdcc_writel(host, MCI_RXDATAAVLBLMASK, MMCIMASK1);
+ msmsdcc_writel(host, (mci_mask0 & (~MCI_IRQ_PIO)) |
+ MCI_RXDATAAVLBLMASK, MMCIMASK0);
if (!host->curr.xfer_remain)
- msmsdcc_writel(host, 0, MMCIMASK1);
+ msmsdcc_writel(host, (mci_mask0 & (~MCI_IRQ_PIO)) | 0,
+ MMCIMASK0);
return IRQ_HANDLED;
}
@@ -854,6 +864,8 @@ msmsdcc_irq(int irq, void *dev_id)
do {
status = msmsdcc_readl(host, MMCISTATUS);
status &= msmsdcc_readl(host, MMCIMASK0);
+ if ((status & (~MCI_IRQ_PIO)) == 0)
+ break;
msmsdcc_writel(host, status, MMCICLEAR);
if (status & MCI_SDIOINTR)
diff --git a/drivers/mmc/host/msm_sdcc.h b/drivers/mmc/host/msm_sdcc.h
index fa626ed..402028d 100644
--- a/drivers/mmc/host/msm_sdcc.h
+++ b/drivers/mmc/host/msm_sdcc.h
@@ -140,6 +140,11 @@
MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \
MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATAENDMASK|MCI_PROGDONEMASK)
+#define MCI_IRQ_PIO \
+ (MCI_RXDATAAVLBLMASK | MCI_TXDATAAVLBLMASK | MCI_RXFIFOEMPTYMASK | \
+ MCI_TXFIFOEMPTYMASK | MCI_RXFIFOFULLMASK | MCI_TXFIFOFULLMASK | \
+ MCI_RXFIFOHALFFULLMASK | MCI_TXFIFOHALFEMPTYMASK | \
+ MCI_RXACTIVEMASK | MCI_TXACTIVEMASK)
/*
* The size of the FIFO in bytes.
*/
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2011-08-23 17:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-23 17:39 [PATCH 0/6] mmc: msm_sdcc Various fixes David Brown
2011-08-23 17:39 ` [PATCH 1/6] mmc: msm_sdcc: Handle error cases in probe David Brown
2011-08-23 17:39 ` [PATCH 2/6] mmc: msm_sdcc: Enable SDC host->clk only after setting the rate David Brown
2011-08-23 17:39 ` [PATCH 3/6] msm: mmc: Remove "pio_irq" resource David Brown
2011-08-23 17:39 ` David Brown [this message]
2011-08-23 17:39 ` [PATCH 5/6] mmc: msm_sdcc: Change initialization order of busclk_timer in probe David Brown
2011-08-23 17:39 ` [PATCH 6/6] mmc: msm_sdcc: Handle dma resource not present case David Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314121158-3319-5-git-send-email-davidb@codeaurora.org \
--to=davidb@codeaurora.org \
--cc=bryanh@codeaurora.org \
--cc=dwalker@fifo99.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=palnatim@codeaurora.org \
--cc=stummala@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox