From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756025Ab1ISSBr (ORCPT ); Mon, 19 Sep 2011 14:01:47 -0400 Received: from wolverine01.qualcomm.com ([199.106.114.254]:45642 "EHLO wolverine01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755487Ab1ISSBq (ORCPT ); Mon, 19 Sep 2011 14:01:46 -0400 X-IronPort-AV: E=McAfee;i="5400,1158,6474"; a="119838394" From: Stephen Boyd To: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org, Will Deacon , Arnd Bergmann Subject: [PATCH 1/2] ARM: debug: Add CLSP711X_UART1 config choice Date: Mon, 19 Sep 2011 11:01:39 -0700 Message-Id: <1316455300-5752-1-git-send-email-sboyd@codeaurora.org> X-Mailer: git-send-email 1.7.7.rc0.70.g82660 In-Reply-To: <20110916114140.GA31334@e102144-lin.cambridge.arm.com> References: <20110916114140.GA31334@e102144-lin.cambridge.arm.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org ARM patch 7072/1 (debug: use kconfig choice for selecting DEBUG_LL UART) only allowed CLSP711X_UART2 to be selected because there is no NONE option in a choice menu. Add a UART1 choice so that users can still choose UART1 explicitly. Signed-off-by: Stephen Boyd --- On 09/16/11 04:41, Will Deacon wrote: > Ah yes. This will need to be added as part of the platform updates to go via > Arnd. It should be easy enough just to have a DEBUG_CLPS711X_UART1 option, > for example, and the platform code will fall back to the first UART. I couldn't find these patches applied in Arnd's tree so I based it off of Russell's for-next branch. arch/arm/Kconfig.debug | 9 +++++++-- 1 files changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 60d1846..a37e646 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -90,14 +90,19 @@ choice Saying N will cause the debug messages to appear on the first 16550 serial port. + config DEBUG_CLPS711X_UART1 + bool "Kernel low-level debugging messages via UART1" + depends on ARCH_CLPS711X + help + Say Y here if you want the debug print routines to direct + their output to the first serial port on these devices. + config DEBUG_CLPS711X_UART2 bool "Kernel low-level debugging messages via UART2" depends on ARCH_CLPS711X help Say Y here if you want the debug print routines to direct their output to the second serial port on these devices. - Saying N will cause the debug messages to appear on the first - serial port. endchoice -- Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.