From: Thomas Meyer <thomas@m3y3r.de>
To: Arnd Bergmann <arnd@arndb.de>
Cc: gregkh@suse.de, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] Support compat_ioctl get/set termios_locked
Date: Wed, 28 Sep 2011 19:37:58 +0200 [thread overview]
Message-ID: <1317231482.1724.2.camel@localhost.localdomain> (raw)
In-Reply-To: <2272244.eQGJoCfPBm@wuerfel>
Am Sonntag, den 25.09.2011, 13:11 +0200 schrieb Arnd Bergmann:
> Hi Thomas,
>
> This looks ok for n_tty, but the same commands are supported for some
> (all?) other tty line disciplines as well, and they remain broken
> after your patch.
>
> I think it would be better to handle this in the common tty_compat_ioctl()
> function before calling into the line discipline's compat_ioctl function.
>
>From a91ed2e890a61a1fa382b6434a3c95774bd1d3da Mon Sep 17 00:00:00 2001
From: Thomas Meyer <thomas@m3y3r.de>
Date: Sat, 24 Sep 2011 10:36:39 +0200
Subject: [PATCH] Support compat_ioctl get/set termios_locked
When running a Fedora 15 (x86) on an x86_64 kernel, in the boot process
plymouthd complains about those two missing ioctls:
[ 2.581783] ioctl32(plymouthd:186): Unknown cmd fd(10) cmd(00005457){t:'T';sz:0} arg(ffb6a5d0) on /dev/tty1
[ 2.581803] ioctl32(plymouthd:186): Unknown cmd fd(10) cmd(00005456){t:'T';sz:0} arg(ffb6a680) on /dev/tty1
both ioctl functions work on the 'struct termios' resp. 'struct termios2',
which has the same size (36 bytes resp. 44 bytes) on x86 and x86_64,
so it's just a matter of converting the pointer from userland.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
---
drivers/tty/tty_io.c | 3 +++
drivers/tty/tty_ioctl.c | 17 +++++++++++++++++
include/linux/tty.h | 2 ++
3 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 4f1fc81..983f29a 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2716,6 +2716,9 @@ static long tty_compat_ioctl(struct file *file, unsigned int cmd,
ld = tty_ldisc_ref_wait(tty);
if (ld->ops->compat_ioctl)
retval = ld->ops->compat_ioctl(tty, file, cmd, arg);
+ else
+ n_tty_compat_ioctl_helper(tty, file, cmd, arg);
+
tty_ldisc_deref(ld);
return retval;
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 53f2442..9314d93 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
+#include <linux/compat.h>
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -1179,3 +1180,19 @@ int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
}
}
EXPORT_SYMBOL(n_tty_ioctl_helper);
+
+#ifdef CONFIG_COMPAT
+long n_tty_compat_ioctl_helper(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ switch (cmd) {
+ case TIOCGLCKTRMIOS:
+ case TIOCSLCKTRMIOS:
+ return tty_mode_ioctl(tty, file, cmd, (unsigned long) compat_ptr(arg));
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+EXPORT_SYMBOL(n_tty_compat_ioctl_helper);
+#endif
+
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 5f2ede8..ddac668 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -581,6 +581,8 @@ extern int __init tty_init(void);
/* tty_ioctl.c */
extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
+extern long n_tty_compat_ioctl_helper(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg);
/* serial.c */
--
1.7.6.2
next prev parent reply other threads:[~2011-09-28 17:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-24 8:51 [PATCH] Support compat_ioctl get/set termios_locked Thomas Meyer
2011-09-25 11:11 ` Arnd Bergmann
2011-09-28 17:37 ` Thomas Meyer [this message]
-- strict thread matches above, loose matches on Subject: below --
2011-10-05 21:13 Thomas Meyer
2011-04-30 14:18 Thomas Meyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1317231482.1724.2.camel@localhost.localdomain \
--to=thomas@m3y3r.de \
--cc=arnd@arndb.de \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox