Re: [BUG?] e1000e Detected Hardware Unit Hang

[joeyli <jlee@suse.com>]

於 四，2011-09-29 於 13:37 +0800，Dave Young 提到：
> On 09/29/2011 01:28 PM, joeyli wrote:
> 
> > Hi Dave, 
> > 
> > 於 四，2011-09-29 於 10:41 +0800，Dave Young 提到：
> >> Hi,
> >>
> >> suspend to ram, after resume, I got below info: (attached the full dmesg)
> >>
> >> [106900.343520] e1000e 0000:00:19.0: eth0: Detected Hardware Unit Hang:
> >> [106900.343521]   TDH                  <1>
> >> [106900.343522]   TDT                  <2>
> >> [106900.343523]   next_to_use          <2>
> >> [106900.343523]   next_to_clean        <1>
> >> [106900.343524] buffer_info[next_to_clean]:
> >> [106900.343525]   time_stamp           <101e7f773>
> >> [106900.343526]   next_to_watch        <1>
> >> [106900.343526]   jiffies              <101e7fa4a>
> >> [106900.343527]   next_to_watch.status <0>
> >> [106900.343528] MAC Status             <80683>
> >> [106900.343529] PHY Status             <796d>
> >> [106900.343529] PHY 1000BASE-T Status  <3800>
> >> [106900.343530] PHY Extended Status    <3000>
> >> [106900.343531] PCI Status             <10>
> >> [106902.342904] e1000e 0000:00:19.0: eth0: Detected Hardware Unit Hang:
> >> [106902.342905]   TDH                  <1>
> >> [106902.342906]   TDT                  <2>
> >> [106902.342907]   next_to_use          <2>
> >> [106902.342907]   next_to_clean        <1>
> >> [106902.342908] buffer_info[next_to_clean]:
> >> [106902.342909]   time_stamp           <101e7f773>
> >> [106902.342909]   next_to_watch        <1>
> >> [106902.342910]   jiffies              <101e7fca2>
> >> [106902.342911]   next_to_watch.status <0>
> >> [106902.342912] MAC Status             <80683>
> >> [106902.342912] PHY Status             <796d>
> >> [106902.342913] PHY 1000BASE-T Status  <3800>
> >> [106902.342914] PHY Extended Status    <3000>
> >> [106902.342915] PCI Status             <10>
> >> [106903.349326] ------------[ cut here ]------------
> >> [106903.349336] WARNING: at net/sched/sch_generic.c:255
> >> dev_watchdog+0xeb/0x14b()
> >> [106903.349339] Hardware name: OptiPlex 760
> >> [106903.349342] NETDEV WATCHDOG: eth0 (e1000e): transmit queue 0 timed out
> >> [106903.349344] Modules linked in: cdc_ether usbnet mii tun kvm_intel
> >> kvm snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device
> >> snd_pcm_oss snd_mixer_oss fuse snd_hda_codec_analog snd_hda_intel
> >> snd_hda_codec snd_hwdep snd_pcm radeon snd_timer snd_page_alloc ttm
> >> dell_wmi sparse_keymap wmi
> >> [106903.349379] Pid: 0, comm: swapper Not tainted 3.1.0-rc6+ #202
> >> [106903.349382] Call Trace:
> >> [106903.349384]  <IRQ>  [<ffffffff8103c5a7>] warn_slowpath_common+0x80/0x98
> >> [106903.349394]  [<ffffffff8103c653>] warn_slowpath_fmt+0x41/0x43
> >> [106903.349399]  [<ffffffff81560149>] dev_watchdog+0xeb/0x14b
> >> [106903.349404]  [<ffffffff810497c6>] run_timer_softirq+0x217/0x300
> >> [106903.349408]  [<ffffffff81049733>] ? run_timer_softirq+0x184/0x300
> >> [106903.349413]  [<ffffffff8156005e>] ? netif_tx_unlock+0x51/0x51
> >> [106903.349419]  [<ffffffff810423c6>] __do_softirq+0xe2/0x1bc
> >> [106903.349424]  [<ffffffff81007a81>] ? paravirt_read_tsc+0x9/0xd
> >> [106903.349428]  [<ffffffff81007fc8>] ? sched_clock+0x9/0xd
> >> [106903.349434]  [<ffffffff8160063c>] call_softirq+0x1c/0x30
> >> [106903.349438]  [<ffffffff81003ba2>] do_softirq+0x46/0x9c
> >> [106903.349442]  [<ffffffff81042696>] irq_exit+0x5b/0xbe
> >> [106903.349446]  [<ffffffff8100384a>] do_IRQ+0x89/0xa0
> >> [106903.349452]  [<ffffffff815f8e33>] common_interrupt+0x73/0x73
> >> [106903.349454]  <EOI>  [<ffffffff81008d81>] ? mwait_idle+0x8a/0xc1
> >> [106903.349462]  [<ffffffff81008d78>] ? mwait_idle+0x81/0xc1
> >> [106903.349467]  [<ffffffff810012ab>] cpu_idle+0xb3/0xd5
> >> [106903.349473]  [<ffffffff815d8dbe>] rest_init+0xb2/0xb9
> >> [106903.349477]  [<ffffffff815d8d0c>] ?
> >> csum_partial_copy_generic+0x16c/0x16c
> >> [106903.349483]  [<ffffffff81a22b49>] start_kernel+0x390/0x39b
> >> [106903.349487]  [<ffffffff81a222af>] x86_64_start_reservations+0xb6/0xba
> >> [106903.349491]  [<ffffffff81a223b4>] x86_64_start_kernel+0x101/0x110
> >> [106903.349495] ---[ end trace 1d36d9ed335e092c ]---
> >> [106903.349722] e1000e 0000:00:19.0: eth0: Reset adapter
> >>
> > 
> > What's your kernel version?
> 
> 
> My info:
> 
> bash-4.1$ uname -a
> Linux darkstar 3.1.0-rc6+ #202 SMP Tue Sep 20 12:55:02 HKT 2011 x86_64
> Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz GenuineIntel GNU/Linux
> 
> bash-4.1$ lspci|grep Ethernet
> 00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network
> Connection (rev 02)
> 

My pci info:
06:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit
Ethernet Controller (Copper) (rev 01)

> > 
> > On my machine also have the same problem, but don't need suspend/resume,
> > just need BOOT and WAIT!!
> > Sometimes just need wait 35 - 45 minutes, but sometimes just need wait 3
> > minutes.
> > 
> > My kernel version is v3.0.
> > 
> > 


Thank's
Joey Lee