public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
	Ian Lartey <ian@opensource.wolfsonmicro.com>,
	Dimitris Papastamos <dp@opensource.wolfsonmicro.com>,
	Liam Girdwood <lrg@ti.com>,
	alsa-devel@alsa-project.org
Subject: [PATCH 01/10] ASoC: wm8510: Convert to snd_soc_cache_sync
Date: Thu, 06 Oct 2011 14:11:43 +0800	[thread overview]
Message-ID: <1317881503.13399.3.camel@phoenix> (raw)
In-Reply-To: <1317881417.13399.1.camel@phoenix>

Convert to snd_soc_cache_sync for sync reg_cache with the hardware.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
 sound/soc/codecs/wm8510.c |   30 +++++++++++++++++++-----------
 1 files changed, 19 insertions(+), 11 deletions(-)

diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index 55a4c83..8e2fe22 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -55,6 +55,17 @@ static const u16 wm8510_reg[WM8510_CACHEREGNUM] = {
 #define WM8510_POWER1_BIASEN  0x08
 #define WM8510_POWER1_BUFIOEN 0x10
 
+static int wm8510_volatile_register(struct snd_soc_codec *codec,
+				    unsigned int reg)
+{
+	switch (reg) {
+	case WM8510_RESET:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
 #define wm8510_reset(c)	snd_soc_write(c, WM8510_RESET, 0)
 
 /* codec private data */
@@ -467,6 +478,7 @@ static int wm8510_mute(struct snd_soc_dai *dai, int mute)
 static int wm8510_set_bias_level(struct snd_soc_codec *codec,
 	enum snd_soc_bias_level level)
 {
+	int ret;
 	u16 power1 = snd_soc_read(codec, WM8510_POWER1) & ~0x3;
 
 	switch (level) {
@@ -480,6 +492,12 @@ static int wm8510_set_bias_level(struct snd_soc_codec *codec,
 		power1 |= WM8510_POWER1_BIASEN | WM8510_POWER1_BUFIOEN;
 
 		if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+			ret = snd_soc_cache_sync(codec);
+			if (ret < 0) {
+				dev_err(codec->dev, "Failed to sync cache: %d\n", ret);
+				return ret;
+			}
+
 			/* Initial cap charge at VMID 5k */
 			snd_soc_write(codec, WM8510_POWER1, power1 | 0x3);
 			mdelay(100);
@@ -541,18 +559,7 @@ static int wm8510_suspend(struct snd_soc_codec *codec, pm_message_t state)
 
 static int wm8510_resume(struct snd_soc_codec *codec)
 {
-	int i;
-	u8 data[2];
-	u16 *cache = codec->reg_cache;
-
-	/* Sync reg_cache with the hardware */
-	for (i = 0; i < ARRAY_SIZE(wm8510_reg); i++) {
-		data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
-		data[1] = cache[i] & 0x00ff;
-		codec->hw_write(codec->control_data, data, 2);
-	}
 	wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
 	return 0;
 }
 
@@ -597,6 +604,7 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8510 = {
 	.reg_cache_size = ARRAY_SIZE(wm8510_reg),
 	.reg_word_size = sizeof(u16),
 	.reg_cache_default =wm8510_reg,
+	.volatile_register = wm8510_volatile_register,
 };
 
 static const struct of_device_id wm8510_of_match[] = {
-- 
1.7.4.1




  reply	other threads:[~2011-10-06  6:11 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-10-06  6:10 [PATCH 00/10] Convert wm8xxx codec drivers to use snd_soc_cache_sync Axel Lin
2011-10-06  6:11 ` Axel Lin [this message]
2011-10-06 13:22   ` [PATCH 01/10] ASoC: wm8510: Convert to snd_soc_cache_sync Mark Brown
2011-10-06  6:13 ` [PATCH 02/10] ASoC: wm8711: " Axel Lin
2011-10-06  6:14 ` [PATCH 03/10] ASoC: wm8731: " Axel Lin
2011-10-06  6:15 ` [PATCH 04/10] ASoC: wm8750: " Axel Lin
2011-10-06  6:16 ` [PATCH 05/10] ASoC: wm8776: " Axel Lin
2011-10-06  6:17 ` [PATCH 06/10] ASoC: wm8940: " Axel Lin
2011-10-06 11:28   ` Jonathan Cameron
2011-10-06 11:33     ` Axel Lin
2011-10-06 13:18     ` Mark Brown
2011-10-06 13:35       ` Jonathan Cameron
2011-10-06  6:18 ` [PATCH 07/10] ASoC: wm8960: " Axel Lin
2011-10-06  7:25   ` [PATCH 07/10 v2] " Axel Lin
2011-10-06  6:19 ` [PATCH 08/10] ASoC: wm8971: " Axel Lin
2011-10-06  6:20 ` [PATCH 09/10] ASoC: wm8974: " Axel Lin
2011-10-06  6:21 ` [PATCH 10/10] ASoC: wm8988: " Axel Lin
2011-10-06  6:52 ` [PATCH 00/10] Convert wm8xxx codec drivers to use snd_soc_cache_sync Axel Lin
2011-10-06  7:10   ` Axel Lin
2011-10-06 10:14 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1317881503.13399.3.camel@phoenix \
    --to=axel.lin@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=dp@opensource.wolfsonmicro.com \
    --cc=ian@opensource.wolfsonmicro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lrg@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox