From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>,
alsa-devel@alsa-project.org
Subject: [PATCH 07/11] ASoC: wm8960: Convert to snd_soc_write
Date: Fri, 07 Oct 2011 07:53:18 +0800 [thread overview]
Message-ID: <1317945198.5579.13.camel@phoenix> (raw)
In-Reply-To: <1317944619.5579.1.camel@phoenix>
Convert codec->hw_write to snd_soc_write
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
sound/soc/codecs/wm8960.c | 34 ++++++++++++++++++++++++----------
1 files changed, 24 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index 831c20f..c043722 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -555,6 +555,26 @@ static int wm8960_mute(struct snd_soc_dai *dai, int mute)
return 0;
}
+static void wm8960_sync_cache(struct snd_soc_codec *codec)
+{
+ short i;
+ u16 *cache;
+
+ if (!codec->cache_sync)
+ return;
+ codec->cache_only = 0;
+ codec->cache_bypass = 1;
+ /* restore cache */
+ cache = codec->reg_cache;
+ for (i = 0; i < codec->driver->reg_cache_size; i++) {
+ if (i == WM8960_RESET || cache[i] == wm8960_reg[i])
+ continue;
+ snd_soc_write(codec, i, cache[i]);
+ }
+ codec->cache_bypass = 0;
+ codec->cache_sync = 0;
+}
+
static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
@@ -574,6 +594,8 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec,
case SND_SOC_BIAS_STANDBY:
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ wm8960_sync_cache(codec);
+
/* Enable anti-pop features */
snd_soc_write(codec, WM8960_APOP1,
WM8960_POBCTRL | WM8960_SOFT_ST |
@@ -629,6 +651,8 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec,
case SND_SOC_BIAS_PREPARE:
switch (codec->dapm.bias_level) {
case SND_SOC_BIAS_STANDBY:
+ wm8960_sync_cache(codec);
+
/* Enable anti pop mode */
snd_soc_update_bits(codec, WM8960_APOP1,
WM8960_POBCTRL | WM8960_SOFT_ST |
@@ -901,16 +925,6 @@ static int wm8960_suspend(struct snd_soc_codec *codec, pm_message_t state)
static int wm8960_resume(struct snd_soc_codec *codec)
{
struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
- int i;
- u8 data[2];
- u16 *cache = codec->reg_cache;
-
- /* Sync reg_cache with the hardware */
- for (i = 0; i < ARRAY_SIZE(wm8960_reg); i++) {
- data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
- data[1] = cache[i] & 0x00ff;
- codec->hw_write(codec->control_data, data, 2);
- }
wm8960->set_bias_level(codec, SND_SOC_BIAS_STANDBY);
return 0;
--
1.7.4.1
next prev parent reply other threads:[~2011-10-06 23:53 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-06 23:43 [PATCH 00/11 v2] Convert wm8xxx codec drivers to use snd_soc_write/snd_soc_cache_sync Axel Lin
2011-10-06 23:45 ` [PATCH 01/11] ASoC: wm8510: Convert to snd_soc_write Axel Lin
2011-10-07 2:40 ` [PATCH 01/11 RESEND] " Axel Lin
2011-10-07 9:57 ` Mark Brown
2011-10-07 13:10 ` Axel Lin
2011-10-06 23:46 ` [PATCH 02/11] ASoC: wm8711: " Axel Lin
2011-10-06 23:47 ` [PATCH 03/11] ASoC: wm8731: " Axel Lin
2011-10-06 23:49 ` [PATCH 04/11] ASoC: wm8750: " Axel Lin
2011-10-06 23:50 ` [PATCH 05/11] ASoC: wm8776: " Axel Lin
2011-10-06 23:52 ` [PATCH 06/11] ASoC: wm8940: Convert to snd_soc_cache_sync Axel Lin
2011-10-06 23:53 ` Axel Lin [this message]
2011-10-06 23:54 ` [PATCH 08/11] ASoC: wm8971: Convert to snd_soc_write Axel Lin
2011-10-06 23:55 ` [PATCH 09/11] ASoC: wm8974: " Axel Lin
2011-10-06 23:55 ` [PATCH 10/11] ASoC: wm8988: " Axel Lin
2011-10-06 23:56 ` [PATCH 11/11] ASoC: wm8990: Convert to snd_soc_cache_sync Axel Lin
2011-10-07 10:23 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1317945198.5579.13.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox