From: jim.cromie@gmail.com
To: jbaron@redhat.com
Cc: greg@kroah.com, joe@perches.com, bart.vanassche@gmail.com,
linux-kernel@vger.kernel.org, Jim Cromie <jim.cromie@gmail.com>
Subject: [PATCH 14/26] dynamic_debug: refactor query_matches_callsite out of ddebug_change
Date: Fri, 7 Oct 2011 14:33:20 -0600 [thread overview]
Message-ID: <1318019612-20068-15-git-send-email-jim.cromie@gmail.com> (raw)
In-Reply-To: <1318019612-20068-1-git-send-email-jim.cromie@gmail.com>
From: Jim Cromie <jim.cromie@gmail.com>
This makes no behavioral change, its just a code-move/refactor
to encapsulate matching behavior.
If this function is reused, note that it excludes check of the module;
that is done once for the table, this code refactors the test inside
the loop over the module's ddebug callsites.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---
lib/dynamic_debug.c | 54 +++++++++++++++++++++++++++++---------------------
1 files changed, 31 insertions(+), 23 deletions(-)
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 2f39b2f..329e18d 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -125,6 +125,36 @@ do { \
q->first_lineno, q->last_lineno); \
} while (0)
+static bool query_matches_callsite(struct _ddebug *dp,
+ const struct ddebug_query *query)
+{
+ /* match against the source filename */
+ if (query->filename != NULL &&
+ strcmp(query->filename, dp->filename) &&
+ strcmp(query->filename, basename(dp->filename)) &&
+ strcmp(query->filename, trim_prefix(dp->filename)))
+ return false;
+
+ /* match against the function */
+ if (query->function != NULL &&
+ strcmp(query->function, dp->function))
+ return false;
+
+ /* match against the format */
+ if (query->format != NULL &&
+ strstr(dp->format, query->format) == NULL)
+ return false;
+
+ /* match against the line number range */
+ if (query->first_lineno && dp->lineno < query->first_lineno)
+ return false;
+
+ if (query->last_lineno && dp->lineno > query->last_lineno)
+ return false;
+
+ return true;
+}
+
/*
* Search the tables for _ddebug's which match the given
* `query' and apply the `flags' and `mask' to them. Tells
@@ -151,29 +181,7 @@ static void ddebug_change(const struct ddebug_query *query,
for (i = 0 ; i < dt->num_ddebugs ; i++) {
struct _ddebug *dp = &dt->ddebugs[i];
- /* match against the source filename */
- if (query->filename != NULL &&
- strcmp(query->filename, dp->filename) &&
- strcmp(query->filename, basename(dp->filename)) &&
- strcmp(query->filename, trim_prefix(dp->filename)))
- continue;
-
- /* match against the function */
- if (query->function != NULL &&
- strcmp(query->function, dp->function))
- continue;
-
- /* match against the format */
- if (query->format != NULL &&
- strstr(dp->format, query->format) == NULL)
- continue;
-
- /* match against the line number range */
- if (query->first_lineno &&
- dp->lineno < query->first_lineno)
- continue;
- if (query->last_lineno &&
- dp->lineno > query->last_lineno)
+ if (!query_matches_callsite(dp, query))
continue;
nfound++;
--
1.7.4.4
next prev parent reply other threads:[~2011-10-07 20:37 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-21 21:54 jim.cromie
2011-09-21 21:54 ` [PATCH 01/26] dynamic_debug: drop enabled field from struct _ddebug, use flags & _DPRINTK_FLAGS_PRINT jim.cromie
2011-09-21 21:54 ` [PATCH 02/26] dynamic_debug: make dynamic-debug supersede DEBUG ccflag jim.cromie
2011-09-21 21:54 ` [PATCH 03/26] dynamic_debug: replace strcpy with strlcpy, in ddebug_setup_query() jim.cromie
2011-09-21 21:54 ` [PATCH 04/26] dynamic_debug: warn when >1 of each type of match-spec is given jim.cromie
2011-09-21 21:54 ` [PATCH 05/26] dynamic_debug: pr_err() call should not depend upon verbosity jim.cromie
2011-09-21 21:54 ` [PATCH 06/26] dynamic_debug: add trim_prefix() to provide source-root relative paths jim.cromie
2011-09-21 21:54 ` [PATCH 07/26] dynamic_debug: change verbosity at runtime jim.cromie
2011-09-21 21:54 ` [PATCH 08/26] dynamic_debug: define several levels of verbosity jim.cromie
2011-09-21 21:54 ` [PATCH 09/26] dynamic_debug: process multiple commands on a line jim.cromie
2011-09-21 21:54 ` [PATCH 10/26] dynamic_debug: enlarge command/query write buffer jim.cromie
2011-09-21 22:29 ` Joe Perches
2011-09-21 21:55 ` [PATCH 11/26] dynamic_debug: hoist locking in ddebug_change to callers jim.cromie
2011-09-21 21:55 ` [PATCH 12/26] dynamic_debug: dont kill entire facility on error parsing ddebug_query jim.cromie
2011-09-21 21:55 ` [PATCH 13/26] dynamic_debug: factor vpr_info_dq out of ddebug_parse_query jim.cromie
2011-09-21 21:55 ` [PATCH 14/26] dynamic_debug: refactor query_matches_callsite out of ddebug_change jim.cromie
2011-09-21 21:55 ` [PATCH 15/26] dynamic_debug: drop explicit foo != NULL checks jim.cromie
2011-09-21 21:55 ` [PATCH 16/26] dynamic_debug: save 'a' queries to pending-list for later (re)application jim.cromie
2011-09-21 21:55 ` [PATCH 17/26] dynamic_debug: remove pending query when flags zeroed jim.cromie
2011-09-21 21:55 ` [PATCH 18/26] dynamic_debug: describe_flags with '=[pmflta_]*' jim.cromie
2011-09-21 21:55 ` [PATCH 19/26] dynamic_debug: add flags filtering to flags spec jim.cromie
2011-09-21 21:55 ` [PATCH 20/26] dynamic_debug: make ddebug_describe_flags more generic jim.cromie
2011-09-21 21:55 ` [PATCH 21/26] dynamic_debug: add $DBGFS/dynamic_debug/pending file jim.cromie
2011-09-21 21:55 ` [PATCH 22/26] dynamic_debug: early return if _ddebug table is empty jim.cromie
2011-09-21 21:55 ` [PATCH 23/26] dynamic_debug: document pending queries, flags-filter, multiple queries jim.cromie
2011-09-21 22:35 ` Randy Dunlap
2011-09-27 16:33 ` [patch 23/26 revised] jim.cromie
2011-09-27 16:33 ` [PATCH 23/26] dynamic_debug: document pending queries, flags-filter, multiple queries jim.cromie
2011-10-10 18:54 ` Jonathan Corbet
2011-10-10 19:27 ` Jason Baron
2011-10-18 20:41 ` Jim Cromie
2011-10-19 20:52 ` Jason Baron
2011-09-21 21:55 ` [PATCH 24/26] dynamic_debug: reduce lineno field to a saner 18 bits jim.cromie
2011-09-21 21:55 ` [PATCH 25/26] dynamic_debug: add pr_fmt_dbg() for dynamic_pr_debug jim.cromie
2011-09-22 20:57 ` Joe Perches
2011-09-23 10:31 ` Bart Van Assche
2011-09-23 17:42 ` Joe Perches
2011-09-27 20:37 ` Jim Cromie
2011-09-27 23:36 ` Joe Perches
2011-09-28 2:54 ` Jim Cromie
2011-09-28 4:51 ` Joe Perches
2011-09-28 17:27 ` Jim Cromie
2011-09-29 15:24 ` Joe Perches
2011-10-08 19:07 ` Bart Van Assche
2011-10-08 20:53 ` Joe Perches
2011-09-27 21:40 ` [revised patches 25,26/26] dynamic_debug: add pr_fmt_*() jim.cromie
2011-09-27 21:40 ` [PATCH 25/26] dynamic_debug: add pr_fmt_debug() for dynamic_pr_debug jim.cromie
2011-09-27 21:41 ` [PATCH 26/26] scx200_acb: use pr_(info|warn|err|debug) and dynamic-debug facilities jim.cromie
2011-09-21 21:55 ` jim.cromie
2011-09-26 23:23 ` your mail Greg KH
2011-10-07 20:33 ` [PATCH 00/26] dynamic_debug: add pending queries, etc (~resend) jim.cromie
2011-10-07 20:33 ` [PATCH 01/26] dynamic_debug: drop enabled field from struct _ddebug, use flags & _DPRINTK_FLAGS_PRINT jim.cromie
2011-10-07 20:33 ` [PATCH 02/26] dynamic_debug: make dynamic-debug supersede DEBUG ccflag jim.cromie
2011-10-07 20:33 ` [PATCH 03/26] dynamic_debug: replace strcpy with strlcpy, in ddebug_setup_query() jim.cromie
2011-10-07 20:33 ` [PATCH 04/26] dynamic_debug: warn when >1 of each type of match-spec is given jim.cromie
2011-10-07 20:33 ` [PATCH 05/26] dynamic_debug: pr_err() call should not depend upon verbosity jim.cromie
2011-10-07 21:21 ` Joe Perches
2011-10-07 20:33 ` [PATCH 06/26] dynamic_debug: add trim_prefix() to provide source-root relative paths jim.cromie
2011-10-07 20:33 ` [PATCH 07/26] dynamic_debug: change verbosity at runtime jim.cromie
2011-10-07 20:33 ` [PATCH 08/26] dynamic_debug: define several levels of verbosity jim.cromie
2011-10-07 20:33 ` [PATCH 09/26] dynamic_debug: process multiple commands on a line jim.cromie
2011-10-07 20:33 ` [PATCH 10/26] dynamic_debug: enlarge command/query write buffer jim.cromie
2011-10-07 20:33 ` [PATCH 11/26] dynamic_debug: hoist locking in ddebug_change to callers jim.cromie
2011-10-07 20:33 ` [PATCH 12/26] dynamic_debug: dont kill entire facility on error parsing ddebug_query jim.cromie
2011-10-07 20:33 ` [PATCH 13/26] dynamic_debug: factor vpr_info_dq out of ddebug_parse_query jim.cromie
2011-10-07 20:33 ` jim.cromie [this message]
2011-10-07 20:33 ` [PATCH 15/26] dynamic_debug: drop explicit foo != NULL checks jim.cromie
2011-10-07 20:33 ` [PATCH 16/26] dynamic_debug: save 'a' queries to pending-list for later (re)application jim.cromie
2011-10-07 20:33 ` [PATCH 17/26] dynamic_debug: remove pending query when flags zeroed jim.cromie
2011-10-07 20:33 ` [PATCH 18/26] dynamic_debug: describe_flags with '=[pmflta_]*' jim.cromie
2011-10-07 20:33 ` [PATCH 19/26] dynamic_debug: add flags filtering to flags spec jim.cromie
2011-10-07 20:33 ` [PATCH 20/26] dynamic_debug: make ddebug_describe_flags more generic jim.cromie
2011-10-07 20:33 ` [PATCH 21/26] dynamic_debug: add $DBGFS/dynamic_debug/pending file jim.cromie
2011-10-07 20:33 ` [PATCH 22/26] dynamic_debug: early return if _ddebug table is empty jim.cromie
2011-10-07 20:33 ` [PATCH 23/26] dynamic_debug: document pending queries, flags-filter, multiple queries jim.cromie
2011-10-07 20:33 ` [PATCH 24/26] dynamic_debug: reduce lineno field to a saner 18 bits jim.cromie
2011-10-07 20:33 ` [PATCH 25/26] dynamic_debug: add pr_fmt_*() for each severity jim.cromie
2011-10-07 20:33 ` [PATCH 26/26] printk.h: fix pr_cont_once() to not use pr_fmt() jim.cromie
2011-10-07 20:45 ` Joe Perches
2011-10-18 18:52 ` [PATCH 00/26] dynamic_debug: add pending queries, etc (~resend) Greg KH
2011-10-19 20:57 ` Jason Baron
2011-10-19 22:29 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1318019612-20068-15-git-send-email-jim.cromie@gmail.com \
--to=jim.cromie@gmail.com \
--cc=bart.vanassche@gmail.com \
--cc=greg@kroah.com \
--cc=jbaron@redhat.com \
--cc=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).