From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Dimitris Papastamos <dp@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>,
alsa-devel@alsa-project.org
Subject: [PATCH 2/2] ASoC: wm9081: Use snd_soc_update_bits for read-modify-write
Date: Mon, 17 Oct 2011 12:36:52 +0800 [thread overview]
Message-ID: <1318826212.12989.2.camel@phoenix> (raw)
In-Reply-To: <1318826071.12989.0.camel@phoenix>
Use snd_soc_update_bits for read-modify-write register access instead of
open-coding it using snd_soc_read and snd_soc_write
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
sound/soc/codecs/wm9081.c | 81 +++++++++++++++++++--------------------------
1 files changed, 34 insertions(+), 47 deletions(-)
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
index 66092ef..f4fc03b 100644
--- a/sound/soc/codecs/wm9081.c
+++ b/sound/soc/codecs/wm9081.c
@@ -766,84 +766,72 @@ static const struct snd_soc_dapm_route wm9081_audio_paths[] = {
static int wm9081_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 reg;
-
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
/* VMID=2*40k */
- reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
- reg &= ~WM9081_VMID_SEL_MASK;
- reg |= 0x2;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_SEL_MASK, 0x2);
/* Normal bias current */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg &= ~WM9081_STBY_BIAS_ENA;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_STBY_BIAS_ENA, 0);
break;
case SND_SOC_BIAS_STANDBY:
/* Initial cold start */
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
/* Disable LINEOUT discharge */
- reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
- reg &= ~WM9081_LINEOUT_DISCH;
- snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL,
+ WM9081_LINEOUT_DISCH, 0);
/* Select startup bias source */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_BIAS_SRC | WM9081_BIAS_ENA,
+ WM9081_BIAS_SRC | WM9081_BIAS_ENA);
/* VMID 2*4k; Soft VMID ramp enable */
- reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
- reg |= WM9081_VMID_RAMP | 0x6;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
-
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_RAMP | 0x6,
+ WM9081_VMID_RAMP | 0x6);
mdelay(100);
/* Normal bias enable & soft start off */
- reg |= WM9081_BIAS_ENA;
- reg &= ~WM9081_VMID_RAMP;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_RAMP | WM9081_BIAS_ENA,
+ WM9081_BIAS_ENA);
/* Standard bias source */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg &= ~WM9081_BIAS_SRC;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_BIAS_SRC, 0);
}
/* VMID 2*240k */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg &= ~WM9081_VMID_SEL_MASK;
- reg |= 0x04;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_VMID_SEL_MASK, 0x04);
/* Standby bias current on */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg |= WM9081_STBY_BIAS_ENA;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_STBY_BIAS_ENA,
+ WM9081_STBY_BIAS_ENA);
break;
case SND_SOC_BIAS_OFF:
/* Startup bias source */
- reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
- reg |= WM9081_BIAS_SRC;
- snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+ WM9081_BIAS_SRC, WM9081_BIAS_SRC);
/* Disable VMID and biases with soft ramping */
- reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
- reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA);
- reg |= WM9081_VMID_RAMP;
- snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+ WM9081_VMID_RAMP | WM9081_VMID_SEL_MASK |
+ WM9081_BIAS_ENA, WM9081_VMID_RAMP);
/* Actively discharge LINEOUT */
- reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
- reg |= WM9081_LINEOUT_DISCH;
- snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+ snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL,
+ WM9081_LINEOUT_DISCH,
+ WM9081_LINEOUT_DISCH);
break;
}
@@ -1242,11 +1230,10 @@ static int wm9081_probe(struct snd_soc_codec *codec)
wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Enable zero cross by default */
- reg = snd_soc_read(codec, WM9081_ANALOGUE_LINEOUT);
- snd_soc_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC);
- reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_PGA);
- snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
- reg | WM9081_SPKPGAZC);
+ snd_soc_update_bits(codec, WM9081_ANALOGUE_LINEOUT,
+ WM9081_LINEOUTZC, WM9081_LINEOUTZC);
+ snd_soc_update_bits(codec, WM9081_ANALOGUE_SPEAKER_PGA,
+ WM9081_SPKPGAZC, WM9081_SPKPGAZC);
snd_soc_add_controls(codec, wm9081_snd_controls,
ARRAY_SIZE(wm9081_snd_controls));
--
1.7.4.1
next prev parent reply other threads:[~2011-10-17 4:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-17 4:34 [PATCH 1/2] ASoC: wm9081: Fix setting soft VMID ramp enable with VMID 2*240k Axel Lin
2011-10-17 4:36 ` Axel Lin [this message]
2011-10-17 23:25 ` [PATCH 2/2] ASoC: wm9081: Use snd_soc_update_bits for read-modify-write Mark Brown
2011-10-18 1:43 ` Axel Lin
2011-10-17 23:22 ` [PATCH 1/2] ASoC: wm9081: Fix setting soft VMID ramp enable with VMID 2*240k Mark Brown
2011-10-20 1:50 ` Axel Lin
2011-10-20 12:37 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1318826212.12989.2.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=dp@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).