[PATCH 8/9] x86, RAS: Add attributes needed for HW injection

[Borislav Petkov <bp@amd64.org>]

From: Borislav Petkov <borislav.petkov@amd.com>

hw_inject denotes whether we want to do a hardware or a software
injection and, in the case of hardware injection, we want to do that on
a particular cpu, thus the 'cpu' attribute.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 arch/x86/kernel/cpu/ras/amd/mce-inject.c |   55 ++++++++++++++++++++++++++++++
 1 files changed, 55 insertions(+), 0 deletions(-)

diff --git a/arch/x86/kernel/cpu/ras/amd/mce-inject.c b/arch/x86/kernel/cpu/ras/amd/mce-inject.c
index 1b797bd..8646080 100644
--- a/arch/x86/kernel/cpu/ras/amd/mce-inject.c
+++ b/arch/x86/kernel/cpu/ras/amd/mce-inject.c
@@ -77,6 +77,59 @@ static int toggle_hw_mce_inject(unsigned int cpu, bool enable)
 }
 
 /*
+ * HW or SW injection
+ */
+static int hw_inj_get(void *data, u64 *val)
+{
+	struct mce *m = (struct mce *)data;
+
+	*val = !!(m->inject_flags & MCJ_HW_MSR_INJECT);
+
+	return 0;
+}
+
+static int hw_inj_set(void *data, u64 val)
+{
+	struct mce *m = (struct mce *)data;
+
+	switch (val) {
+	case 0:
+		m->inject_flags &= (u8)~MCJ_HW_MSR_INJECT;
+		break;
+
+	case 1:
+		m->inject_flags |= MCJ_HW_MSR_INJECT;
+		break;
+
+	default:
+		printk(KERN_ERR "%s: Only 0 or 1 allowed!\n", __func__);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(hw_inj_fops, hw_inj_get, hw_inj_set, "%llu\n");
+
+/*
+ * On which CPU to inject?
+ */
+MCE_INJECT_GET(extcpu);
+
+static int inj_extcpu_set(void *data, u64 val)
+{
+	struct mce *m = (struct mce *)data;
+
+	if (val >= num_online_cpus()) {
+		printk(KERN_ERR "%s: Non-existent CPU: %llu\n", __func__, val);
+		return -EINVAL;
+	}
+	m->extcpu = val;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(extcpu_fops, inj_extcpu_get, inj_extcpu_set, "%llu\n");
+
+/*
  * This denotes into which bank we're injecting and triggers
  * the injection, at the same time.
  */
@@ -116,6 +169,8 @@ struct dfs_node {
 	{ .name = "misc",	.fops = &misc_fops },
 	{ .name = "addr",	.fops = &addr_fops },
 	{ .name = "bank",	.fops = &bank_fops },
+	{ .name = "hw_inject",	.fops = &hw_inj_fops },
+	{ .name = "cpu",	.fops = &extcpu_fops },
 };
 
 static int __init init_mce_inject(void)
-- 
1.7.4.rc2