[PATCH v4] ASoC: wm9081: Use snd_soc_update_bits for read-modify-write

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
	Dimitris Papastamos <dp@opensource.wolfsonmicro.com>,
	Liam Girdwood <lrg@ti.com>,
	alsa-devel@alsa-project.org
Subject: [PATCH v4] ASoC: wm9081: Use snd_soc_update_bits for read-modify-write
Date: Wed, 09 Nov 2011 17:00:05 +0800	[thread overview]
Message-ID: <1320829205.6708.3.camel@phoenix> (raw)

Use snd_soc_update_bits for read-modify-write register access instead of
open-coding it using snd_soc_read and snd_soc_write

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
 sound/soc/codecs/wm9081.c |   81 +++++++++++++++++++-------------------------
 1 files changed, 35 insertions(+), 46 deletions(-)

diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
index b491ae1..f7c0738 100644
--- a/sound/soc/codecs/wm9081.c
+++ b/sound/soc/codecs/wm9081.c
@@ -826,84 +826,74 @@ static const struct snd_soc_dapm_route wm9081_audio_paths[] = {
 static int wm9081_set_bias_level(struct snd_soc_codec *codec,
 				 enum snd_soc_bias_level level)
 {
-	u16 reg;
-
 	switch (level) {
 	case SND_SOC_BIAS_ON:
 		break;
 
 	case SND_SOC_BIAS_PREPARE:
 		/* VMID=2*40k */
-		reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
-		reg &= ~WM9081_VMID_SEL_MASK;
-		reg |= 0x2;
-		snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+		snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+				    WM9081_VMID_SEL_MASK, 0x2);
 
 		/* Normal bias current */
-		reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
-		reg &= ~WM9081_STBY_BIAS_ENA;
-		snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+		snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+				    WM9081_STBY_BIAS_ENA, 0);
 		break;
 
 	case SND_SOC_BIAS_STANDBY:
 		/* Initial cold start */
 		if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
 			/* Disable LINEOUT discharge */
-			reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
-			reg &= ~WM9081_LINEOUT_DISCH;
-			snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+			snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL,
+					    WM9081_LINEOUT_DISCH, 0);
 
 			/* Select startup bias source */
-			reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
-			reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA;
-			snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+			snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+					    WM9081_BIAS_SRC | WM9081_BIAS_ENA,
+					    WM9081_BIAS_SRC | WM9081_BIAS_ENA);
 
 			/* VMID 2*4k; Soft VMID ramp enable */
-			reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
-			reg |= WM9081_VMID_RAMP | 0x6;
-			snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+			snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+					    WM9081_VMID_RAMP |
+					    WM9081_VMID_SEL_MASK,
+					    WM9081_VMID_RAMP | 0x6);
 
 			mdelay(100);
 
 			/* Normal bias enable & soft start off */
-			reg &= ~WM9081_VMID_RAMP;
-			snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+			snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+					    WM9081_VMID_RAMP, 0);
 
 			/* Standard bias source */
-			reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
-			reg &= ~WM9081_BIAS_SRC;
-			snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+			snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+					    WM9081_BIAS_SRC, 0);
 		}
 
 		/* VMID 2*240k */
-		reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
-		reg &= ~WM9081_VMID_SEL_MASK;
-		reg |= 0x04;
-		snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+		snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+				    WM9081_VMID_SEL_MASK, 0x04);
 
 		/* Standby bias current on */
-		reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
-		reg |= WM9081_STBY_BIAS_ENA;
-		snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+		snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+				    WM9081_STBY_BIAS_ENA,
+				    WM9081_STBY_BIAS_ENA);
 		break;
 
 	case SND_SOC_BIAS_OFF:
 		/* Startup bias source and disable bias */
-		reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
-		reg |= WM9081_BIAS_SRC;
-		reg &= ~WM9081_BIAS_ENA;
-		snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
+		snd_soc_update_bits(codec, WM9081_BIAS_CONTROL_1,
+				    WM9081_BIAS_SRC | WM9081_BIAS_ENA,
+				    WM9081_BIAS_SRC);
 
 		/* Disable VMID with soft ramping */
-		reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
-		reg &= ~WM9081_VMID_SEL_MASK;
-		reg |= WM9081_VMID_RAMP;
-		snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
+		snd_soc_update_bits(codec, WM9081_VMID_CONTROL,
+				    WM9081_VMID_RAMP | WM9081_VMID_SEL_MASK,
+				    WM9081_VMID_RAMP);
 
 		/* Actively discharge LINEOUT */
-		reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
-		reg |= WM9081_LINEOUT_DISCH;
-		snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+		snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL,
+				    WM9081_LINEOUT_DISCH,
+				    WM9081_LINEOUT_DISCH);
 		break;
 	}
 
@@ -1291,11 +1281,10 @@ static int wm9081_probe(struct snd_soc_codec *codec)
 	wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
 	/* Enable zero cross by default */
-	reg = snd_soc_read(codec, WM9081_ANALOGUE_LINEOUT);
-	snd_soc_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC);
-	reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_PGA);
-	snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
-		     reg | WM9081_SPKPGAZC);
+	snd_soc_update_bits(codec, WM9081_ANALOGUE_LINEOUT,
+			    WM9081_LINEOUTZC, WM9081_LINEOUTZC);
+	snd_soc_update_bits(codec, WM9081_ANALOGUE_SPEAKER_PGA,
+			    WM9081_SPKPGAZC, WM9081_SPKPGAZC);
 
 	if (!wm9081->pdata.num_retune_configs) {
 		dev_dbg(codec->dev,
-- 
1.7.5.4

next             reply	other threads:[~2011-11-09  9:00 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-11-09  9:00 Axel Lin [this message]
2011-11-09 11:46 ` [PATCH v4] ASoC: wm9081: Use snd_soc_update_bits for read-modify-write Mark Brown

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:b491ae1 dfblob:f7c0738 )
 OR (
bs:"[PATCH v4] ASoC: wm9081: Use snd_soc_update_bits for read-modify-write" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1320829205.6708.3.camel@phoenix \
    --to=axel.lin@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=dp@opensource.wolfsonmicro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lrg@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox