From: Rene Bolldorf <xsecute@googlemail.com>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
Rene Bolldorf <xsecute@googlemail.com>
Subject: [PATCH 1/2] Initial PCI support for Atheros 724x SoCs. (v2)
Date: Thu, 17 Nov 2011 15:02:56 +0100 [thread overview]
Message-ID: <1321538577-548-2-git-send-email-xsecute@googlemail.com> (raw)
In-Reply-To: <1321538577-548-1-git-send-email-xsecute@googlemail.com>
Signed-off-by: Rene Bolldorf <xsecute@googlemail.com>
---
arch/mips/include/asm/mach-ath79/pci-ath724x.h | 21 +++
arch/mips/pci/Makefile | 1 +
arch/mips/pci/pci-ath724x.c | 174 ++++++++++++++++++++++++
3 files changed, 196 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/include/asm/mach-ath79/pci-ath724x.h
create mode 100644 arch/mips/pci/pci-ath724x.c
diff --git a/arch/mips/include/asm/mach-ath79/pci-ath724x.h b/arch/mips/include/asm/mach-ath79/pci-ath724x.h
new file mode 100644
index 0000000..454885f
--- /dev/null
+++ b/arch/mips/include/asm/mach-ath79/pci-ath724x.h
@@ -0,0 +1,21 @@
+/*
+ * Atheros 724x PCI support
+ *
+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
+#define __ASM_MACH_ATH79_PCI_ATH724X_H
+
+struct ath724x_pci_data {
+ int irq;
+ void *pdata;
+};
+
+void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
+
+#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index bb82cbd..19cfe04 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
ops-bcm63xx.o
obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
+obj-$(CONFIG_SOC_AR724X) += pci-ath724x.o
#
# These are still pretty much in the old state, watch, go blind.
diff --git a/arch/mips/pci/pci-ath724x.c b/arch/mips/pci/pci-ath724x.c
new file mode 100644
index 0000000..9f30e5d
--- /dev/null
+++ b/arch/mips/pci/pci-ath724x.c
@@ -0,0 +1,174 @@
+/*
+ * Atheros 724x PCI support
+ *
+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <asm/mach-ath79/pci-ath724x.h>
+
+#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys))
+#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val))
+
+#define ATH724X_PCI_DEV_BASE 0x14000000
+#define ATH724X_PCI_MEM_BASE 0x10000000
+#define ATH724X_PCI_MEM_SIZE 0x08000000
+
+static DEFINE_SPINLOCK(ath724x_pci_lock);
+static struct ath724x_pci_data *pci_data;
+static int pci_data_size;
+
+static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t *value)
+{
+ unsigned long flags, addr, tval, mask;
+
+ if (devfn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (where & (size - 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ spin_lock_irqsave(&ath724x_pci_lock, flags);
+
+ switch (size) {
+ case 1:
+ addr = where & ~3;
+ mask = 0xff000000 >> ((where % 4) * 8);
+ tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
+ tval = tval & ~mask;
+ *value = (tval >> ((4 - (where % 4))*8));
+ break;
+ case 2:
+ addr = where & ~3;
+ mask = 0xffff0000 >> ((where % 4)*8);
+ tval = reg_read(ATH724X_PCI_DEV_BASE + addr);
+ tval = tval & ~mask;
+ *value = (tval >> ((4 - (where % 4))*8));
+ break;
+ case 4:
+ *value = reg_read(ATH724X_PCI_DEV_BASE + where);
+ break;
+ default:
+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t value)
+{
+ unsigned long flags, tval, addr, mask;
+
+ if (devfn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (where & (size - 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ spin_lock_irqsave(&ath724x_pci_lock, flags);
+
+ switch (size) {
+ case 1:
+ addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
+ mask = 0xff000000 >> ((where % 4)*8);
+ tval = reg_read(addr);
+ tval = tval & ~mask;
+ tval |= (value << ((4 - (where % 4))*8)) & mask;
+ reg_write(addr, tval);
+ break;
+ case 2:
+ addr = (ATH724X_PCI_DEV_BASE + where) & ~3;
+ mask = 0xffff0000 >> ((where % 4)*8);
+ tval = reg_read(addr);
+ tval = tval & ~mask;
+ tval |= (value << ((4 - (where % 4))*8)) & mask;
+ reg_write(addr, tval);
+ break;
+ case 4:
+ reg_write((ATH724X_PCI_DEV_BASE + where), value);
+ break;
+ default:
+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ spin_unlock_irqrestore(&ath724x_pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops ath724x_pci_ops = {
+ .read = ath724x_pci_read,
+ .write = ath724x_pci_write,
+};
+
+static struct resource ath724x_io_resource = {
+ .name = "PCI IO space",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource ath724x_mem_resource = {
+ .name = "PCI memory space",
+ .start = ATH724X_PCI_MEM_BASE,
+ .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct pci_controller ath724x_pci_controller = {
+ .pci_ops = &ath724x_pci_ops,
+ .io_resource = &ath724x_io_resource,
+ .mem_resource = &ath724x_mem_resource,
+};
+
+void ath724x_pci_add_data(struct ath724x_pci_data *data, int size)
+{
+ pci_data = data;
+ pci_data_size = size;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+{
+ unsigned int devfn = dev->devfn;
+ int irq = -1;
+
+ if (devfn > pci_data_size - 1)
+ return irq;
+
+ irq = pci_data[devfn].irq;
+
+ return irq;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ unsigned int devfn = dev->devfn;
+
+ if (devfn > pci_data_size - 1)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ dev->dev.platform_data = pci_data[devfn].pdata;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int __init ath724x_pcibios_init(void)
+{
+ register_pci_controller(&ath724x_pci_controller);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+arch_initcall(ath724x_pcibios_init);
--
1.7.7.1
next prev parent reply other threads:[~2011-11-17 14:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-16 10:55 [PATCH 0/2] Summary Rene Bolldorf
2011-11-16 10:55 ` [PATCH 1/2] Initial PCI support for Atheros 724x SoCs Rene Bolldorf
2011-11-16 19:50 ` Manuel Lauss
2011-11-16 10:55 ` [PATCH 2/2] Initial support for the Ubiquiti Networks XM board Rene Bolldorf
2011-11-16 20:02 ` Gabor Juhos
[not found] ` <CAEWqx58YQAKQ=D=qteipHQq5Q==+aEiKMYP4FczMZ9kReogMDQ@mail.gmail.com>
2011-11-17 10:31 ` René Bolldorf
2011-11-17 14:02 ` [PATCH 0/2] Summary Rene Bolldorf
2011-11-17 14:02 ` Rene Bolldorf [this message]
2011-11-17 14:33 ` [PATCH 1/2] Initial PCI support for Atheros 724x SoCs. (v2) Ralf Baechle
2011-11-17 14:02 ` [PATCH 2/2] Initial support for the Ubiquiti Networks XM board (rev 1.0). (patch v2) Rene Bolldorf
2011-11-17 14:34 ` Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1321538577-548-2-git-send-email-xsecute@googlemail.com \
--to=xsecute@googlemail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).