From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Michael Hennerich <hennerich@blackfin.uclinux.org>,
Manuel Lauss <manuel.lauss@gmail.com>,
Olof Johansson <olof@lixom.net>,
Marc Zyngier <maz@misterjones.org>,
Ralf Baechle <ralf@linux-mips.org>,
Eric Miao <eric.y.miao@gmail.com>,
Dominik Brodowski <linux@dominikbrodowski.net>,
linux-pcmcia@lists.infradead.org,
Andrew Morton <akpm@linux-foundation.org>
Subject: [PATCH RESEND] pcmcia: convert drivers/pcmcia/* to use module_platform_driver()
Date: Tue, 27 Dec 2011 16:09:39 +0800 [thread overview]
Message-ID: <1324973379.2351.1.camel@phoenix> (raw)
This patch converts the drivers in drivers/pcmcia/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.
Cc: Michael Hennerich <hennerich@blackfin.uclinux.org>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Marc Zyngier <maz@misterjones.org> [pxa2xx_viper.c]
Acked-by: Manuel Lauss <manuel.lauss@googlemail.com> [db1xxx_ss.c]
---
This patch was sent on https://lkml.org/lkml/2011/11/26/139
Also CC Andrew Morton in case nobody picks up the patch.
drivers/pcmcia/bfin_cf_pcmcia.c | 13 +------------
drivers/pcmcia/db1xxx_ss.c | 13 +------------
drivers/pcmcia/electra_cf.c | 12 +-----------
drivers/pcmcia/m8xx_pcmcia.c | 13 +------------
drivers/pcmcia/pxa2xx_viper.c | 13 +------------
drivers/pcmcia/xxs1500_ss.c | 13 +------------
6 files changed, 6 insertions(+), 71 deletions(-)
diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c
index 4922139..ac1a223 100644
--- a/drivers/pcmcia/bfin_cf_pcmcia.c
+++ b/drivers/pcmcia/bfin_cf_pcmcia.c
@@ -310,18 +310,7 @@ static struct platform_driver bfin_cf_driver = {
.remove = __devexit_p(bfin_cf_remove),
};
-static int __init bfin_cf_init(void)
-{
- return platform_driver_register(&bfin_cf_driver);
-}
-
-static void __exit bfin_cf_exit(void)
-{
- platform_driver_unregister(&bfin_cf_driver);
-}
-
-module_init(bfin_cf_init);
-module_exit(bfin_cf_exit);
+module_platform_driver(bfin_cf_driver);
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver");
diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c
index 5b7c227..ba299a2 100644
--- a/drivers/pcmcia/db1xxx_ss.c
+++ b/drivers/pcmcia/db1xxx_ss.c
@@ -580,18 +580,7 @@ static struct platform_driver db1x_pcmcia_socket_driver = {
.remove = __devexit_p(db1x_pcmcia_socket_remove),
};
-int __init db1x_pcmcia_socket_load(void)
-{
- return platform_driver_register(&db1x_pcmcia_socket_driver);
-}
-
-void __exit db1x_pcmcia_socket_unload(void)
-{
- platform_driver_unregister(&db1x_pcmcia_socket_driver);
-}
-
-module_init(db1x_pcmcia_socket_load);
-module_exit(db1x_pcmcia_socket_unload);
+module_platform_driver(db1x_pcmcia_socket_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("PCMCIA Socket Services for Alchemy Db/Pb1x00 boards");
diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
index 06ad3e5..7647d23 100644
--- a/drivers/pcmcia/electra_cf.c
+++ b/drivers/pcmcia/electra_cf.c
@@ -365,17 +365,7 @@ static struct platform_driver electra_cf_driver = {
.remove = electra_cf_remove,
};
-static int __init electra_cf_init(void)
-{
- return platform_driver_register(&electra_cf_driver);
-}
-module_init(electra_cf_init);
-
-static void __exit electra_cf_exit(void)
-{
- platform_driver_unregister(&electra_cf_driver);
-}
-module_exit(electra_cf_exit);
+module_platform_driver(electra_cf_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 271a590..b120928 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -1304,15 +1304,4 @@ static struct platform_driver m8xx_pcmcia_driver = {
.remove = m8xx_remove,
};
-static int __init m8xx_init(void)
-{
- return platform_driver_register(&m8xx_pcmcia_driver);
-}
-
-static void __exit m8xx_exit(void)
-{
- platform_driver_unregister(&m8xx_pcmcia_driver);
-}
-
-module_init(m8xx_init);
-module_exit(m8xx_exit);
+module_platform_driver(m8xx_pcmcia_driver);
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c
index 1064b1c..44f5c7f 100644
--- a/drivers/pcmcia/pxa2xx_viper.c
+++ b/drivers/pcmcia/pxa2xx_viper.c
@@ -204,18 +204,7 @@ static struct platform_driver viper_pcmcia_driver = {
.id_table = viper_pcmcia_id_table,
};
-static int __init viper_pcmcia_init(void)
-{
- return platform_driver_register(&viper_pcmcia_driver);
-}
-
-static void __exit viper_pcmcia_exit(void)
-{
- return platform_driver_unregister(&viper_pcmcia_driver);
-}
-
-module_init(viper_pcmcia_init);
-module_exit(viper_pcmcia_exit);
+module_platform_driver(viper_pcmcia_driver);
MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table);
MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c
index 379f421..1ceff69 100644
--- a/drivers/pcmcia/xxs1500_ss.c
+++ b/drivers/pcmcia/xxs1500_ss.c
@@ -321,18 +321,7 @@ static struct platform_driver xxs1500_pcmcia_socket_driver = {
.remove = __devexit_p(xxs1500_pcmcia_remove),
};
-int __init xxs1500_pcmcia_socket_load(void)
-{
- return platform_driver_register(&xxs1500_pcmcia_socket_driver);
-}
-
-void __exit xxs1500_pcmcia_socket_unload(void)
-{
- platform_driver_unregister(&xxs1500_pcmcia_socket_driver);
-}
-
-module_init(xxs1500_pcmcia_socket_load);
-module_exit(xxs1500_pcmcia_socket_unload);
+module_platform_driver(xxs1500_pcmcia_socket_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("PCMCIA Socket Services for MyCable XXS1500 systems");
--
1.7.5.4
reply other threads:[~2011-12-27 8:10 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1324973379.2351.1.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=eric.y.miao@gmail.com \
--cc=hennerich@blackfin.uclinux.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pcmcia@lists.infradead.org \
--cc=linux@dominikbrodowski.net \
--cc=manuel.lauss@gmail.com \
--cc=maz@misterjones.org \
--cc=olof@lixom.net \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox