linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Michael Hennerich <hennerich@blackfin.uclinux.org>,
	Anatolij Gustschin <agust@denx.de>,
	Daniel Mack <zonque@gmail.com>, Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <greg@kroah.com>
Subject: [PATCH 3/3] MISC: convert drivers/misc/* to use module_spi_driver()
Date: Sun, 22 Jan 2012 15:38:22 +0800	[thread overview]
Message-ID: <1327217902.6497.4.camel@phoenix> (raw)
In-Reply-To: <1327217629.6497.0.camel@phoenix>

This patch converts the drivers in drivers/misc/* to use the
module_spi_driver() macro which makes the code smaller and a bit
simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Michael Hennerich <hennerich@blackfin.uclinux.org>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Daniel Mack <zonque@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
---
 drivers/misc/ad525x_dpot-spi.c         |   12 +-----------
 drivers/misc/eeprom/at25.c             |   12 +-----------
 drivers/misc/eeprom/eeprom_93xx46.c    |   12 +-----------
 drivers/misc/lis3lv02d/lis3lv02d_spi.c |   13 +------------
 drivers/misc/ti_dac7512.c              |   13 +------------
 5 files changed, 5 insertions(+), 57 deletions(-)

diff --git a/drivers/misc/ad525x_dpot-spi.c b/drivers/misc/ad525x_dpot-spi.c
index 822749e..f623175 100644
--- a/drivers/misc/ad525x_dpot-spi.c
+++ b/drivers/misc/ad525x_dpot-spi.c
@@ -135,17 +135,7 @@ static struct spi_driver ad_dpot_spi_driver = {
 	.id_table	= ad_dpot_spi_id,
 };
 
-static int __init ad_dpot_spi_init(void)
-{
-	return spi_register_driver(&ad_dpot_spi_driver);
-}
-module_init(ad_dpot_spi_init);
-
-static void __exit ad_dpot_spi_exit(void)
-{
-	spi_unregister_driver(&ad_dpot_spi_driver);
-}
-module_exit(ad_dpot_spi_exit);
+module_spi_driver(ad_dpot_spi_driver);
 
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("digital potentiometer SPI bus driver");
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index c627e41..01ab3c9 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -405,17 +405,7 @@ static struct spi_driver at25_driver = {
 	.remove		= __devexit_p(at25_remove),
 };
 
-static int __init at25_init(void)
-{
-	return spi_register_driver(&at25_driver);
-}
-module_init(at25_init);
-
-static void __exit at25_exit(void)
-{
-	spi_unregister_driver(&at25_driver);
-}
-module_exit(at25_exit);
+module_spi_driver(at25_driver);
 
 MODULE_DESCRIPTION("Driver for most SPI EEPROMs");
 MODULE_AUTHOR("David Brownell");
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
index 0c7ebb1..ce3fe36 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -392,17 +392,7 @@ static struct spi_driver eeprom_93xx46_driver = {
 	.remove		= __devexit_p(eeprom_93xx46_remove),
 };
 
-static int __init eeprom_93xx46_init(void)
-{
-	return spi_register_driver(&eeprom_93xx46_driver);
-}
-module_init(eeprom_93xx46_init);
-
-static void __exit eeprom_93xx46_exit(void)
-{
-	spi_unregister_driver(&eeprom_93xx46_driver);
-}
-module_exit(eeprom_93xx46_exit);
+module_spi_driver(eeprom_93xx46_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Driver for 93xx46 EEPROMs");
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_spi.c b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
index b2c1be1..80880e9 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d_spi.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
@@ -126,18 +126,7 @@ static struct spi_driver lis302dl_spi_driver = {
 	.remove	= __devexit_p(lis302dl_spi_remove),
 };
 
-static int __init lis302dl_init(void)
-{
-	return spi_register_driver(&lis302dl_spi_driver);
-}
-
-static void __exit lis302dl_exit(void)
-{
-	spi_unregister_driver(&lis302dl_spi_driver);
-}
-
-module_init(lis302dl_init);
-module_exit(lis302dl_exit);
+module_spi_driver(lis302dl_spi_driver);
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
 MODULE_DESCRIPTION("lis3lv02d SPI glue layer");
diff --git a/drivers/misc/ti_dac7512.c b/drivers/misc/ti_dac7512.c
index d3f229a..5acbba1 100644
--- a/drivers/misc/ti_dac7512.c
+++ b/drivers/misc/ti_dac7512.c
@@ -82,20 +82,9 @@ static struct spi_driver dac7512_driver = {
 	.remove	= __devexit_p(dac7512_remove),
 };
 
-static int __init dac7512_init(void)
-{
-	return spi_register_driver(&dac7512_driver);
-}
-
-static void __exit dac7512_exit(void)
-{
-	spi_unregister_driver(&dac7512_driver);
-}
+module_spi_driver(dac7512_driver);
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
 MODULE_DESCRIPTION("DAC7512 16-bit DAC");
 MODULE_LICENSE("GPL v2");
 MODULE_VERSION(DRIVER_VERSION);
-
-module_init(dac7512_init);
-module_exit(dac7512_exit);
-- 
1.7.5.4




  parent reply	other threads:[~2012-01-22  7:38 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-22  7:33 [PATCH 1/3] MISC: convert drivers/misc/* to use module_platform_driver() Axel Lin
2012-01-22  7:36 ` [PATCH 2/3] MISC: convert drivers/misc/* to use module_i2c_driver() Axel Lin
2012-01-22  7:38 ` Axel Lin [this message]
2012-01-23  3:27 ` [PATCH 1/3] MISC: convert drivers/misc/* to use module_platform_driver() Pratyush Anand
2012-01-23 16:44 ` Ira W. Snyder

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1327217902.6497.4.camel@phoenix \
    --to=axel.lin@gmail.com \
    --cc=agust@denx.de \
    --cc=arnd@arndb.de \
    --cc=greg@kroah.com \
    --cc=hennerich@blackfin.uclinux.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=zonque@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).