From: Lin Ming <ming.m.lin@intel.com>
To: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Norbert Preining <preining@logic.at>,
linux-kernel@vger.kernel.org, jeff@garzik.org,
Tejun Heo <tj@kernel.org>,
"stern@rowland.harvard.edu >> Alan Stern"
<stern@rowland.harvard.edu>,
linux-ide@vger.kernel.org,
Linux PM mailing list <linux-pm@vger.kernel.org>,
"Rafael J. Wysocki" <rjw@sisk.pl>
Subject: Re: Regression 3.2 -> 3.3-rc1 10 sec hang at boot and resume, COMRESET failed
Date: Fri, 03 Feb 2012 09:15:16 +0800 [thread overview]
Message-ID: <1328231716.15079.15.camel@minggr> (raw)
In-Reply-To: <4F2A4B7E.2090503@linux.vnet.ibm.com>
On Thu, 2012-02-02 at 14:08 +0530, Srivatsa S. Bhat wrote:
> Adding some Cc's.
>
> On 02/02/2012 10:42 AM, Norbert Preining wrote:
>
> > Dear all,
> >
> > (please Cc)
> >
> > since going from 3.2 to 3.3-rc1 I see a kind of regression wrt booting
> > time, namely the detection of the CD drive hangs for 10sec (both
> > dmesg were taken on the same hardware on the same day):
> >
> > with 3.3-rc1 and rc2:
> > [ 3.694012] sd 0:0:0:0: [sda] Attached SCSI disk
> > [ 9.004013] ata2: link is slow to respond, please be patient (ready=0)
> > [ 13.652013] ata2: COMRESET failed (errno=-16)
> > [ 13.972022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
I'm looking into this problem.
But I can't reproduce this regression.
Could you attach the full 3.3-rc2 dmesg?
Thanks,
Lin Ming
> > [ 13.975721] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> > [ 13.977166] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.21, max UDMA/33
> > [ 13.981294] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> > [ 13.982734] ata2.00: configured for UDMA/33
> > [ 13.987964] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.21 PQ: 0 ANSI: 5
> > [ 13.991482] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> > [ 13.992971] cdrom: Uniform CD-ROM driver Revision: 3.20
> > [ 13.994574] sr 1:0:0:0: Attached scsi CD-ROM sr0
> > [ 13.994672] sr 1:0:0:0: Attached scsi generic sg1 type 5
> > [ 14.316021] ata5: SATA link down (SStatus 0 SControl 300)
> > [ 14.636019] ata6: SATA link down (SStatus 0 SControl 300)
> >
> > with 3.2:
> > [ 3.218156] sd 0:0:0:0: [sda] Attached SCSI disk
> > [ 3.484023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > [ 3.487708] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> > [ 3.489156] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.21, max UDMA/33
> > [ 3.494321] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> > [ 3.495761] ata2.00: configured for UDMA/33
> > [ 3.501057] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.21 PQ: 0 ANSI: 5
> > [ 3.504515] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> > [ 3.505995] cdrom: Uniform CD-ROM driver Revision: 3.20
> > [ 3.507611] sr 1:0:0:0: Attached scsi CD-ROM sr0
> > [ 3.507715] sr 1:0:0:0: Attached scsi generic sg1 type 5
> > [ 3.828025] ata5: SATA link down (SStatus 0 SControl 300)
> > [ 4.148020] ata6: SATA link down (SStatus 0 SControl 300)
> >
> >
> > Is there anything I can do here?
> >
>
next prev parent reply other threads:[~2012-02-03 1:15 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-02 5:12 Regression 3.2 -> 3.3-rc1 10 sec hang at boot and resume, COMRESET failed Norbert Preining
2012-02-02 8:38 ` Srivatsa S. Bhat
2012-02-03 1:15 ` Lin Ming [this message]
2012-02-03 4:21 ` Lin Ming
2012-02-03 4:29 ` Norbert Preining
2012-02-03 4:29 ` Norbert Preining
2012-02-03 5:24 ` Norbert Preining
2012-02-03 5:34 ` Lin Ming
2012-02-03 5:43 ` Norbert Preining
2012-02-03 8:27 ` Lin Ming
2012-02-06 0:46 ` Norbert Preining
2012-02-06 1:36 ` Lin Ming
2012-02-06 2:40 ` Norbert Preining
2012-02-06 2:49 ` Lin Ming
2012-02-06 3:15 ` Norbert Preining
2012-02-06 4:42 ` Lin Ming
2012-02-06 16:19 ` Tejun Heo
2012-02-06 19:20 ` Brian Norris
2012-02-06 22:46 ` Norbert Preining
2012-02-08 9:10 ` Valdis.Kletnieks
2012-02-13 17:44 ` Tejun Heo
2012-02-15 5:15 ` Brian Norris
2012-02-15 16:57 ` Tejun Heo
2012-02-15 18:29 ` Jeff Garzik
2012-02-15 18:31 ` Tejun Heo
2012-02-15 19:18 ` Jeff Garzik
2012-02-15 23:39 ` Brian Norris
2012-02-16 16:22 ` Jeff Garzik
2012-02-16 14:20 ` Mark Lord
2012-02-16 16:19 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1328231716.15079.15.camel@minggr \
--to=ming.m.lin@intel.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=preining@logic.at \
--cc=rjw@sisk.pl \
--cc=srivatsa.bhat@linux.vnet.ibm.com \
--cc=stern@rowland.harvard.edu \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).