* [PATCH] regulator: Simplify the implementation of tps65912_get_voltage_dcdc
@ 2012-03-08 4:07 Axel Lin
2012-03-08 18:08 ` Mark Brown
0 siblings, 1 reply; 2+ messages in thread
From: Axel Lin @ 2012-03-08 4:07 UTC (permalink / raw)
To: linux-kernel; +Cc: Margarita Olaya Cabrera, Liam Girdwood, Mark Brown
Call tps65912_list_voltage_dcdc instead of duplicating the same code.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/tps65912-regulator.c | 112 +++++++++++++-------------------
1 files changed, 45 insertions(+), 67 deletions(-)
diff --git a/drivers/regulator/tps65912-regulator.c b/drivers/regulator/tps65912-regulator.c
index da00d88..b685757 100644
--- a/drivers/regulator/tps65912-regulator.c
+++ b/drivers/regulator/tps65912-regulator.c
@@ -506,66 +506,88 @@ static unsigned int tps65912_get_mode(struct regulator_dev *dev)
return mode;
}
-static int tps65912_get_voltage_dcdc(struct regulator_dev *dev)
+static int tps65912_list_voltage_dcdc(struct regulator_dev *dev,
+ unsigned selector)
{
struct tps65912_reg *pmic = rdev_get_drvdata(dev);
- struct tps65912 *mfd = pmic->mfd;
- int id = rdev_get_id(dev), voltage = 0, range;
- int opvsel = 0, avsel = 0, sr, vsel;
+ int range, voltage = 0, id = rdev_get_id(dev);
switch (id) {
case TPS65912_REG_DCDC1:
- opvsel = tps65912_reg_read(mfd, TPS65912_DCDC1_OP);
- avsel = tps65912_reg_read(mfd, TPS65912_DCDC1_AVS);
range = pmic->dcdc1_range;
break;
case TPS65912_REG_DCDC2:
- opvsel = tps65912_reg_read(mfd, TPS65912_DCDC2_OP);
- avsel = tps65912_reg_read(mfd, TPS65912_DCDC2_AVS);
range = pmic->dcdc2_range;
break;
case TPS65912_REG_DCDC3:
- opvsel = tps65912_reg_read(mfd, TPS65912_DCDC3_OP);
- avsel = tps65912_reg_read(mfd, TPS65912_DCDC3_AVS);
range = pmic->dcdc3_range;
break;
case TPS65912_REG_DCDC4:
- opvsel = tps65912_reg_read(mfd, TPS65912_DCDC4_OP);
- avsel = tps65912_reg_read(mfd, TPS65912_DCDC4_AVS);
range = pmic->dcdc4_range;
break;
default:
return -EINVAL;
}
- sr = (opvsel & OP_SELREG_MASK) >> OP_SELREG_SHIFT;
- if (sr)
- vsel = avsel;
- else
- vsel = opvsel;
- vsel &= 0x3F;
-
switch (range) {
case 0:
/* 0.5 - 1.2875V in 12.5mV steps */
- voltage = tps65912_vsel_to_uv_range0(vsel);
+ voltage = tps65912_vsel_to_uv_range0(selector);
break;
case 1:
/* 0.7 - 1.4875V in 12.5mV steps */
- voltage = tps65912_vsel_to_uv_range1(vsel);
+ voltage = tps65912_vsel_to_uv_range1(selector);
break;
case 2:
/* 0.5 - 2.075V in 25mV steps */
- voltage = tps65912_vsel_to_uv_range2(vsel);
+ voltage = tps65912_vsel_to_uv_range2(selector);
break;
case 3:
/* 0.5 - 3.8V in 50mV steps */
- voltage = tps65912_vsel_to_uv_range3(vsel);
+ voltage = tps65912_vsel_to_uv_range3(selector);
break;
}
return voltage;
}
+static int tps65912_get_voltage_dcdc(struct regulator_dev *dev)
+{
+ struct tps65912_reg *pmic = rdev_get_drvdata(dev);
+ struct tps65912 *mfd = pmic->mfd;
+ int id = rdev_get_id(dev);
+ int opvsel = 0, avsel = 0, sr, vsel;
+
+ switch (id) {
+ case TPS65912_REG_DCDC1:
+ opvsel = tps65912_reg_read(mfd, TPS65912_DCDC1_OP);
+ avsel = tps65912_reg_read(mfd, TPS65912_DCDC1_AVS);
+ break;
+ case TPS65912_REG_DCDC2:
+ opvsel = tps65912_reg_read(mfd, TPS65912_DCDC2_OP);
+ avsel = tps65912_reg_read(mfd, TPS65912_DCDC2_AVS);
+ break;
+ case TPS65912_REG_DCDC3:
+ opvsel = tps65912_reg_read(mfd, TPS65912_DCDC3_OP);
+ avsel = tps65912_reg_read(mfd, TPS65912_DCDC3_AVS);
+ break;
+ case TPS65912_REG_DCDC4:
+ opvsel = tps65912_reg_read(mfd, TPS65912_DCDC4_OP);
+ avsel = tps65912_reg_read(mfd, TPS65912_DCDC4_AVS);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ sr = (opvsel & OP_SELREG_MASK) >> OP_SELREG_SHIFT;
+ if (sr)
+ vsel = avsel;
+ else
+ vsel = opvsel;
+ vsel &= 0x3F;
+
+ return tps65912_list_voltage_dcdc(dev, vsel);
+}
+
static int tps65912_set_voltage_dcdc(struct regulator_dev *dev,
unsigned selector)
{
@@ -609,50 +631,6 @@ static int tps65912_set_voltage_ldo(struct regulator_dev *dev,
return tps65912_reg_write(mfd, reg, selector | value);
}
-static int tps65912_list_voltage_dcdc(struct regulator_dev *dev,
- unsigned selector)
-{
- struct tps65912_reg *pmic = rdev_get_drvdata(dev);
- int range, voltage = 0, id = rdev_get_id(dev);
-
- switch (id) {
- case TPS65912_REG_DCDC1:
- range = pmic->dcdc1_range;
- break;
- case TPS65912_REG_DCDC2:
- range = pmic->dcdc2_range;
- break;
- case TPS65912_REG_DCDC3:
- range = pmic->dcdc3_range;
- break;
- case TPS65912_REG_DCDC4:
- range = pmic->dcdc4_range;
- break;
- default:
- return -EINVAL;
- }
-
- switch (range) {
- case 0:
- /* 0.5 - 1.2875V in 12.5mV steps */
- voltage = tps65912_vsel_to_uv_range0(selector);
- break;
- case 1:
- /* 0.7 - 1.4875V in 12.5mV steps */
- voltage = tps65912_vsel_to_uv_range1(selector);
- break;
- case 2:
- /* 0.5 - 2.075V in 25mV steps */
- voltage = tps65912_vsel_to_uv_range2(selector);
- break;
- case 3:
- /* 0.5 - 3.8V in 50mV steps */
- voltage = tps65912_vsel_to_uv_range3(selector);
- break;
- }
- return voltage;
-}
-
static int tps65912_list_voltage_ldo(struct regulator_dev *dev,
unsigned selector)
{
--
1.7.5.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] regulator: Simplify the implementation of tps65912_get_voltage_dcdc
2012-03-08 4:07 [PATCH] regulator: Simplify the implementation of tps65912_get_voltage_dcdc Axel Lin
@ 2012-03-08 18:08 ` Mark Brown
0 siblings, 0 replies; 2+ messages in thread
From: Mark Brown @ 2012-03-08 18:08 UTC (permalink / raw)
To: Axel Lin; +Cc: linux-kernel, Margarita Olaya Cabrera, Liam Girdwood
[-- Attachment #1: Type: text/plain, Size: 148 bytes --]
On Thu, Mar 08, 2012 at 12:07:37PM +0800, Axel Lin wrote:
> Call tps65912_list_voltage_dcdc instead of duplicating the same code.
Applied, thanks.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-03-08 18:08 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-08 4:07 [PATCH] regulator: Simplify the implementation of tps65912_get_voltage_dcdc Axel Lin
2012-03-08 18:08 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox