From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Mike Rapoport <mike@compulab.co.il>,
Danny Huang <dahuang@nvidia.com>, Liam Girdwood <lrg@ti.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 3/4] regulator: Convert tps6586x to set_voltage_sel
Date: Sat, 24 Mar 2012 09:42:26 +0800 [thread overview]
Message-ID: <1332553346.14114.5.camel@phoenix> (raw)
In-Reply-To: <1332553050.14114.1.camel@phoenix>
Convert both tps6586x_[ldo|dvm]_set_voltage to one set_voltage_sel callback.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/tps6586x-regulator.c | 70 +++++++++----------------------
1 files changed, 21 insertions(+), 49 deletions(-)
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index af3559b..51ca882 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -89,44 +89,31 @@ static int tps6586x_ldo_list_voltage(struct regulator_dev *rdev,
}
-static int __tps6586x_ldo_set_voltage(struct device *parent,
- struct tps6586x_regulator *ri,
- int min_uV, int max_uV,
- unsigned *selector)
+static int tps6586x_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned selector)
{
- int val, uV;
+ struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
+ struct device *parent = to_tps6586x_dev(rdev);
+ int ret, val, rid = rdev_get_id(rdev);
uint8_t mask;
- for (val = 0; val < ri->desc.n_voltages; val++) {
- uV = ri->voltages[val] * 1000;
-
- /* LDO0 has minimal voltage 1.2 rather than 1.25 */
- if (ri->desc.id == TPS6586X_ID_LDO_0 && val == 0)
- uV -= 50 * 1000;
-
- /* use the first in-range value */
- if (min_uV <= uV && uV <= max_uV) {
-
- *selector = val;
+ val = selector << ri->volt_shift;
+ mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift;
- val <<= ri->volt_shift;
- mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift;
+ ret = tps6586x_update(parent, ri->volt_reg, val, mask);
+ if (ret)
+ return ret;
- return tps6586x_update(parent, ri->volt_reg, val, mask);
- }
+ /* Update go bit for DVM regulators */
+ switch (rid) {
+ case TPS6586X_ID_LDO_2:
+ case TPS6586X_ID_LDO_4:
+ case TPS6586X_ID_SM_0:
+ case TPS6586X_ID_SM_1:
+ ret = tps6586x_set_bits(parent, ri->go_reg, 1 << ri->go_bit);
+ break;
}
-
- return -EINVAL;
-}
-
-static int tps6586x_ldo_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV, unsigned *selector)
-{
- struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps6586x_dev(rdev);
-
- return __tps6586x_ldo_set_voltage(parent, ri, min_uV, max_uV,
- selector);
+ return ret;
}
static int tps6586x_get_voltage_sel(struct regulator_dev *rdev)
@@ -149,21 +136,6 @@ static int tps6586x_get_voltage_sel(struct regulator_dev *rdev)
return val;
}
-static int tps6586x_dvm_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV, unsigned *selector)
-{
- struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps6586x_dev(rdev);
- int ret;
-
- ret = __tps6586x_ldo_set_voltage(parent, ri, min_uV, max_uV,
- selector);
- if (ret)
- return ret;
-
- return tps6586x_set_bits(parent, ri->go_reg, 1 << ri->go_bit);
-}
-
static int tps6586x_regulator_enable(struct regulator_dev *rdev)
{
struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
@@ -199,7 +171,7 @@ static int tps6586x_regulator_is_enabled(struct regulator_dev *rdev)
static struct regulator_ops tps6586x_regulator_ldo_ops = {
.list_voltage = tps6586x_ldo_list_voltage,
.get_voltage_sel = tps6586x_get_voltage_sel,
- .set_voltage = tps6586x_ldo_set_voltage,
+ .set_voltage_sel = tps6586x_set_voltage_sel,
.is_enabled = tps6586x_regulator_is_enabled,
.enable = tps6586x_regulator_enable,
@@ -209,7 +181,7 @@ static struct regulator_ops tps6586x_regulator_ldo_ops = {
static struct regulator_ops tps6586x_regulator_dvm_ops = {
.list_voltage = tps6586x_ldo_list_voltage,
.get_voltage_sel = tps6586x_get_voltage_sel,
- .set_voltage = tps6586x_dvm_set_voltage,
+ .set_voltage_sel = tps6586x_set_voltage_sel,
.is_enabled = tps6586x_regulator_is_enabled,
.enable = tps6586x_regulator_enable,
--
1.7.5.4
next prev parent reply other threads:[~2012-03-24 1:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-24 1:37 [PATCH 1/4] regulator: tps6586x: Fix list minimal voltage setting for LDO0 Axel Lin
2012-03-24 1:38 ` [PATCH 2/4] regulator: Convert tps6586x to get_voltage_sel Axel Lin
2012-03-24 1:42 ` Axel Lin [this message]
2012-03-24 1:44 ` [PATCH 4/4] regulator: Merge tps6586x_regulator_ldo_ops and tps6586x_regulator_dvm_ops Axel Lin
2012-03-26 10:56 ` [PATCH 1/4] regulator: tps6586x: Fix list minimal voltage setting for LDO0 Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1332553346.14114.5.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=dahuang@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=mike@compulab.co.il \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox