[PATCH 2/4] regulator: wm831x-isink: Fix the logic to choose best current limit setting

Axel Lin
2012-03-27T07:18:59Z

Current code in wm831x_isink_set_current actually set the current limit setting
smaller than specified range.

Fix the logic in wm831x_isink_set_current to choose the smallest current limit
setting falls within the specified range.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/wm831x-isink.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/regulator/wm831x-isink.c b/drivers/regulator/wm831x-isink.c
index 634aac3..b414e09 100644
--- a/drivers/regulator/wm831x-isink.c
+++ b/drivers/regulator/wm831x-isink.c
@@ -101,7 +101,7 @@ static int wm831x_isink_set_current(struct regulator_dev *rdev,

for (i = 0; i < ARRAY_SIZE(wm831x_isinkv_values); i++) {
int val = wm831x_isinkv_values[i];
- if (min_uA >= val && val <= max_uA) {
+ if (min_uA <= val && val <= max_uA) {
ret = wm831x_set_bits(wm831x, isink->reg,
WM831X_CS1_ISEL_MASK, i);
return ret;
--
1.7.5.4