From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753318Ab2DENuw (ORCPT ); Thu, 5 Apr 2012 09:50:52 -0400 Received: from outpost1.zedat.fu-berlin.de ([130.133.4.66]:38342 "EHLO outpost1.zedat.fu-berlin.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753104Ab2DENto (ORCPT ); Thu, 5 Apr 2012 09:49:44 -0400 X-Greylist: delayed 1206 seconds by postgrey-1.27 at vger.kernel.org; Thu, 05 Apr 2012 09:49:40 EDT Message-ID: <1333632645.4159.16.camel@localhost> Subject: [PATCH 6/6] sound/pci/hda: clean up CX20549 test mixer setup From: Michael Karcher To: Jaroslav Kysela , alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, Takashi Iwai Date: Thu, 05 Apr 2012 15:30:45 +0200 Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.2.2-1 Content-Transfer-Encoding: 7bit Mime-Version: 1.0 X-Originating-IP: 89.247.230.181 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org name pins consistently (MIC1/LINE1/HP-OUT/CD) on all controls affecting those pins. remove duplicate SET_AMP_GAIN_MUTE to 0x17/index 0 and 0x17/index 1 really select MIC1, not Mixer out for recording "Mixer out" for recording is not a "pin", adjust comment diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 3ab7b25..801e8f2 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -931,10 +931,10 @@ static const struct snd_kcontrol_new cxt5045_test_mixer[] = { /* Output controls */ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x10, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Speaker Playback Switch", 0x10, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Node 11 Playback Volume", 0x11, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Node 11 Playback Switch", 0x11, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("Node 12 Playback Volume", 0x12, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("Node 12 Playback Switch", 0x12, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("HP-OUT Playback Volume", 0x11, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("HP-OUT Playback Switch", 0x11, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x12, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("LINE1 Playback Switch", 0x12, 0x0, HDA_OUTPUT), /* Modes for retasking pin widgets */ CXT_PIN_MODE("HP-OUT pin mode", 0x11, CXT_PIN_DIR_INOUT), @@ -945,16 +945,16 @@ static const struct snd_kcontrol_new cxt5045_test_mixer[] = { /* Loopback mixer controls */ - HDA_CODEC_VOLUME("Mixer-1 Volume", 0x17, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Mixer-1 Switch", 0x17, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("Mixer-2 Volume", 0x17, 0x1, HDA_INPUT), - HDA_CODEC_MUTE("Mixer-2 Switch", 0x17, 0x1, HDA_INPUT), - HDA_CODEC_VOLUME("Mixer-3 Volume", 0x17, 0x2, HDA_INPUT), - HDA_CODEC_MUTE("Mixer-3 Switch", 0x17, 0x2, HDA_INPUT), - HDA_CODEC_VOLUME("Mixer-4 Volume", 0x17, 0x3, HDA_INPUT), - HDA_CODEC_MUTE("Mixer-4 Switch", 0x17, 0x3, HDA_INPUT), - HDA_CODEC_VOLUME("Mixer-5 Volume", 0x17, 0x4, HDA_INPUT), - HDA_CODEC_MUTE("Mixer-5 Switch", 0x17, 0x4, HDA_INPUT), + HDA_CODEC_VOLUME("PCM Volume", 0x17, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("PCM Switch", 0x17, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("MIC1 pin Volume", 0x17, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("MIC1 pin Switch", 0x17, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("LINE1 pin Volume", 0x17, 0x2, HDA_INPUT), + HDA_CODEC_MUTE("LINE1 pin Switch", 0x17, 0x2, HDA_INPUT), + HDA_CODEC_VOLUME("HP-OUT pin Volume", 0x17, 0x3, HDA_INPUT), + HDA_CODEC_MUTE("HP-OUT pin Switch", 0x17, 0x3, HDA_INPUT), + HDA_CODEC_VOLUME("CD pin Volume", 0x17, 0x4, HDA_INPUT), + HDA_CODEC_MUTE("CD pin Switch", 0x17, 0x4, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Input Source", @@ -986,10 +986,6 @@ static const struct hda_verb cxt5045_test_init_verbs[] = { {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x18, AC_VERB_SET_DIGI_CONVERT_1, 0}, - /* Start with output sum widgets muted and their output gains at min */ - {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* Unmute retasking pin widget output buffers since the default * state appears to be output. As the pin mode is changed by the * user the pin mode control will take care of enabling the pin's @@ -1004,11 +1000,11 @@ static const struct hda_verb cxt5045_test_init_verbs[] = { /* Set ADC connection select to match default mixer setting (mic1 * pin) */ - {0x1a, AC_VERB_SET_CONNECT_SEL, 0x00}, - {0x17, AC_VERB_SET_CONNECT_SEL, 0x00}, + {0x1a, AC_VERB_SET_CONNECT_SEL, 0x01}, + {0x17, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Mute all inputs to mixer widget (even unconnected ones) */ - {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Mixer pin */ + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Mixer */ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* Mic1 pin */ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* Line pin */ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* HP pin */ -- 1.7.9.1