From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Kyungmin Park <kyungmin.park@samsung.com>,
Liam Girdwood <lrg@ti.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 1/2] regulator: max8997: Convert ot use devm_kzalloc
Date: Thu, 19 Apr 2012 09:44:13 +0800 [thread overview]
Message-ID: <1334799853.2707.3.camel@phoenix> (raw)
Also simplify the error handling to start unwind from the place
regulator_register fails.
No need to check rdev[i] is NULL or not before calling regulator_unregister.
regulator_unregister is safe if rdev is NULL,
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/max8997.c | 40 +++++++++++++++-------------------------
1 files changed, 15 insertions(+), 25 deletions(-)
diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
index 99d7cb3..20286ad 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -962,16 +962,15 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
return -ENODEV;
}
- max8997 = kzalloc(sizeof(struct max8997_data), GFP_KERNEL);
+ max8997 = devm_kzalloc(&pdev->dev, sizeof(struct max8997_data),
+ GFP_KERNEL);
if (!max8997)
return -ENOMEM;
size = sizeof(struct regulator_dev *) * pdata->num_regulators;
- max8997->rdev = kzalloc(size, GFP_KERNEL);
- if (!max8997->rdev) {
- kfree(max8997);
+ max8997->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ if (!max8997->rdev)
return -ENOMEM;
- }
rdev = max8997->rdev;
max8997->dev = &pdev->dev;
@@ -995,7 +994,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
pdata->buck1_voltage[i] / 1000 +
buck1245_voltage_map_desc.step);
if (ret < 0)
- goto err_alloc;
+ goto err_out;
max8997->buck2_vol[i] = ret =
max8997_get_voltage_proper_val(
@@ -1004,7 +1003,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
pdata->buck2_voltage[i] / 1000 +
buck1245_voltage_map_desc.step);
if (ret < 0)
- goto err_alloc;
+ goto err_out;
max8997->buck5_vol[i] = ret =
max8997_get_voltage_proper_val(
@@ -1013,7 +1012,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
pdata->buck5_voltage[i] / 1000 +
buck1245_voltage_map_desc.step);
if (ret < 0)
- goto err_alloc;
+ goto err_out;
if (max_buck1 < max8997->buck1_vol[i])
max_buck1 = max8997->buck1_vol[i];
@@ -1046,7 +1045,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
!gpio_is_valid(pdata->buck125_gpios[2])) {
dev_err(&pdev->dev, "GPIO NOT VALID\n");
ret = -EINVAL;
- goto err_alloc;
+ goto err_out;
}
ret = gpio_request(pdata->buck125_gpios[0],
@@ -1055,7 +1054,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
dev_warn(&pdev->dev, "Duplicated gpio request"
" on SET1\n");
else if (ret)
- goto err_alloc;
+ goto err_out;
else
gpio1set = true;
@@ -1067,7 +1066,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
else if (ret) {
if (gpio1set)
gpio_free(pdata->buck125_gpios[0]);
- goto err_alloc;
+ goto err_out;
} else
gpio2set = true;
@@ -1081,7 +1080,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
gpio_free(pdata->buck125_gpios[0]);
if (gpio2set)
gpio_free(pdata->buck125_gpios[1]);
- goto err_alloc;
+ goto err_out;
}
gpio_direction_output(pdata->buck125_gpios[0],
@@ -1150,13 +1149,9 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
return 0;
err:
- for (i = 0; i < max8997->num_regulators; i++)
- if (rdev[i])
- regulator_unregister(rdev[i]);
-err_alloc:
- kfree(max8997->rdev);
- kfree(max8997);
-
+ while (--i >= 0)
+ regulator_unregister(rdev[i]);
+err_out:
return ret;
}
@@ -1167,12 +1162,7 @@ static int __devexit max8997_pmic_remove(struct platform_device *pdev)
int i;
for (i = 0; i < max8997->num_regulators; i++)
- if (rdev[i])
- regulator_unregister(rdev[i]);
-
- kfree(max8997->rdev);
- kfree(max8997);
-
+ regulator_unregister(rdev[i]);
return 0;
}
--
1.7.5.4
next reply other threads:[~2012-04-19 1:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-19 1:44 Axel Lin [this message]
2012-04-19 1:47 ` [PATCH 2/2] regulator: max8998: Convert ot use devm_kzalloc Axel Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1334799853.2707.3.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox