From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Laxman Dewangan <ldewangan@nvidia.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Subject: [PATCH RFT] regulator: tps65910: Convert to get_voltage_sel
Date: Wed, 09 May 2012 09:22:47 +0800 [thread overview]
Message-ID: <1336526567.14246.1.camel@phoenix> (raw)
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/tps65910-regulator.c | 34 ++++++++-----------------------
1 files changed, 9 insertions(+), 25 deletions(-)
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 2deeb7c..6f40d36 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -578,10 +578,10 @@ static int tps65910_get_voltage_dcdc_sel(struct regulator_dev *dev)
return -EINVAL;
}
-static int tps65910_get_voltage(struct regulator_dev *dev)
+static int tps65910_get_voltage_sel(struct regulator_dev *dev)
{
struct tps65910_reg *pmic = rdev_get_drvdata(dev);
- int reg, value, id = rdev_get_id(dev), voltage = 0;
+ int reg, value, id = rdev_get_id(dev);
reg = pmic->get_ctrl_reg(id);
if (reg < 0)
@@ -608,9 +608,7 @@ static int tps65910_get_voltage(struct regulator_dev *dev)
return -EINVAL;
}
- voltage = pmic->info[id]->voltage_table[value] * 1000;
-
- return voltage;
+ return value;
}
static int tps65910_get_voltage_vdd3(struct regulator_dev *dev)
@@ -618,10 +616,10 @@ static int tps65910_get_voltage_vdd3(struct regulator_dev *dev)
return 5 * 1000 * 1000;
}
-static int tps65911_get_voltage(struct regulator_dev *dev)
+static int tps65911_get_voltage_sel(struct regulator_dev *dev)
{
struct tps65910_reg *pmic = rdev_get_drvdata(dev);
- int step_mv, id = rdev_get_id(dev);
+ int id = rdev_get_id(dev);
u8 value, reg;
reg = pmic->get_ctrl_reg(id);
@@ -634,13 +632,6 @@ static int tps65911_get_voltage(struct regulator_dev *dev)
case TPS65911_REG_LDO4:
value &= LDO1_SEL_MASK;
value >>= LDO_SEL_SHIFT;
- /* The first 5 values of the selector correspond to 1V */
- if (value < 5)
- value = 0;
- else
- value -= 4;
-
- step_mv = 50;
break;
case TPS65911_REG_LDO3:
case TPS65911_REG_LDO5:
@@ -649,23 +640,16 @@ static int tps65911_get_voltage(struct regulator_dev *dev)
case TPS65911_REG_LDO8:
value &= LDO3_SEL_MASK;
value >>= LDO_SEL_SHIFT;
- /* The first 3 values of the selector correspond to 1V */
- if (value < 3)
- value = 0;
- else
- value -= 2;
-
- step_mv = 100;
break;
case TPS65910_REG_VIO:
value &= LDO_SEL_MASK;
value >>= LDO_SEL_SHIFT;
- return pmic->info[id]->voltage_table[value] * 1000;
+ break;
default:
return -EINVAL;
}
- return (LDO_MIN_VOLT + value * step_mv) * 1000;
+ return value;
}
static int tps65910_set_voltage_dcdc_sel(struct regulator_dev *dev,
@@ -901,7 +885,7 @@ static struct regulator_ops tps65910_ops = {
.enable_time = tps65910_enable_time,
.set_mode = tps65910_set_mode,
.get_mode = tps65910_get_mode,
- .get_voltage = tps65910_get_voltage,
+ .get_voltage_sel = tps65910_get_voltage_sel,
.set_voltage_sel = tps65910_set_voltage_sel,
.list_voltage = tps65910_list_voltage,
};
@@ -913,7 +897,7 @@ static struct regulator_ops tps65911_ops = {
.enable_time = tps65910_enable_time,
.set_mode = tps65910_set_mode,
.get_mode = tps65910_get_mode,
- .get_voltage = tps65911_get_voltage,
+ .get_voltage_sel = tps65911_get_voltage_sel,
.set_voltage_sel = tps65911_set_voltage_sel,
.list_voltage = tps65911_list_voltage,
};
--
1.7.5.4
next reply other threads:[~2012-05-09 1:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-09 1:22 Axel Lin [this message]
2012-05-09 8:22 ` [PATCH RFT] regulator: tps65910: Convert to get_voltage_sel Laxman Dewangan
2012-05-09 8:52 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336526567.14246.1.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=ldewangan@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox