From: Paul Mundt <lethal@linux-sh.org>
To: Grant Likely <grant.likely@secretlab.ca>
Cc: linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org,
Paul Mundt <lethal@linux-sh.org>
Subject: [PATCH 2/8] irqdomain: Export remaining public API symbols.
Date: Sat, 19 May 2012 15:11:42 +0900 [thread overview]
Message-ID: <1337407908-7421-3-git-send-email-lethal@linux-sh.org> (raw)
In-Reply-To: <1337407908-7421-1-git-send-email-lethal@linux-sh.org>
modules making use of irq domains at the very least need access to the
add/remove/lookup routines, though there's nothing preventing them from
using the remainder of the public API, either.
The current set of exports seem primarily geared at DT-enabled platforms
using DT-backed IRQ domains, where many of the API accesses are hidden
away in OF code. The non-DT cases need to do most of this on their own.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
kernel/irq/irqdomain.c | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index 9cae0b2..01d4a0d 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -122,6 +122,7 @@ void irq_domain_remove(struct irq_domain *domain)
irq_domain_free(domain);
}
+EXPORT_SYMBOL_GPL(irq_domain_remove);
static unsigned int irq_domain_legacy_revmap(struct irq_domain *domain,
irq_hw_number_t hwirq)
@@ -209,6 +210,7 @@ struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
irq_domain_add(domain);
return domain;
}
+EXPORT_SYMBOL_GPL(irq_domain_add_legacy);
/**
* irq_domain_add_linear() - Allocate and register a legacy revmap irq_domain.
@@ -238,6 +240,7 @@ struct irq_domain *irq_domain_add_linear(struct device_node *of_node,
irq_domain_add(domain);
return domain;
}
+EXPORT_SYMBOL_GPL(irq_domain_add_linear);
struct irq_domain *irq_domain_add_nomap(struct device_node *of_node,
unsigned int max_irq,
@@ -252,6 +255,7 @@ struct irq_domain *irq_domain_add_nomap(struct device_node *of_node,
}
return domain;
}
+EXPORT_SYMBOL_GPL(irq_domain_add_nomap);
/**
* irq_domain_add_tree()
@@ -273,6 +277,7 @@ struct irq_domain *irq_domain_add_tree(struct device_node *of_node,
}
return domain;
}
+EXPORT_SYMBOL_GPL(irq_domain_add_tree);
/**
* irq_find_host() - Locates a domain for a given device node
@@ -320,6 +325,7 @@ void irq_set_default_host(struct irq_domain *domain)
irq_default_domain = domain;
}
+EXPORT_SYMBOL_GPL(irq_set_default_host);
static int irq_setup_virq(struct irq_domain *domain, unsigned int virq,
irq_hw_number_t hwirq)
@@ -378,6 +384,7 @@ unsigned int irq_create_direct_mapping(struct irq_domain *domain)
return virq;
}
+EXPORT_SYMBOL_GPL(irq_create_direct_mapping);
/**
* irq_create_mapping() - Map a hardware interrupt into linux irq space
@@ -617,6 +624,7 @@ unsigned int irq_radix_revmap_lookup(struct irq_domain *domain,
*/
return irq_data ? irq_data->irq : irq_find_mapping(domain, hwirq);
}
+EXPORT_SYMBOL_GPL(irq_radix_revmap_lookup);
/**
* irq_radix_revmap_insert() - Insert a hw irq to linux irq number mapping.
@@ -641,6 +649,7 @@ void irq_radix_revmap_insert(struct irq_domain *domain, unsigned int virq,
mutex_unlock(&revmap_trees_mutex);
}
}
+EXPORT_SYMBOL_GPL(irq_radix_revmap_insert);
/**
* irq_linear_revmap() - Find a linux irq from a hw irq number.
@@ -674,6 +683,7 @@ unsigned int irq_linear_revmap(struct irq_domain *domain,
return revmap[hwirq];
}
+EXPORT_SYMBOL_GPL(irq_linear_revmap);
#ifdef CONFIG_IRQ_DOMAIN_DEBUG
static int virq_debug_show(struct seq_file *m, void *private)
--
1.7.9.rc0.28.g0e1cf
next prev parent reply other threads:[~2012-05-19 6:13 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-19 6:11 [PATCH 0/8] irqdomain cleanups + identity mapping support Paul Mundt
2012-05-19 6:11 ` [PATCH 1/8] irqdomain: Support removal of IRQ domains Paul Mundt
2012-05-19 18:34 ` Grant Likely
2012-05-19 6:11 ` Paul Mundt [this message]
2012-05-19 18:34 ` [PATCH 2/8] irqdomain: Export remaining public API symbols Grant Likely
2012-05-19 6:11 ` [PATCH 3/8] irqdomain: Make irq_domain_simple_map() static Paul Mundt
2012-05-19 18:35 ` Grant Likely
2012-05-19 6:11 ` [PATCH 4/8] irqdomain: Simple NUMA awareness Paul Mundt
2012-05-19 18:41 ` Grant Likely
2012-05-21 4:46 ` Paul Mundt
2012-05-19 6:11 ` [PATCH 5/8] irqdomain: Kill off duplicate definitions Paul Mundt
2012-05-19 18:42 ` Grant Likely
2012-05-19 6:11 ` [PATCH 6/8] irqdomain: Support identity mapped VIRQ allocation Paul Mundt
2012-05-19 20:21 ` Grant Likely
2012-05-21 4:55 ` Paul Mundt
2012-05-19 6:11 ` [PATCH 7/8] irqdomain: trivial pr_fmt conversion Paul Mundt
2012-05-19 6:34 ` Joe Perches
2012-05-19 6:57 ` Paul Mundt
2012-05-19 18:49 ` Grant Likely
2012-05-19 6:11 ` [PATCH 8/8] irqdomain: Support insertion of existing IRQ allocations Paul Mundt
2012-05-19 18:32 ` [PATCH 0/8] irqdomain cleanups + identity mapping support Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337407908-7421-3-git-send-email-lethal@linux-sh.org \
--to=lethal@linux-sh.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox